Field and mesocosm trials on passive sampling for the study of adsorption and desorption behaviour of lipophilic toxins with a focus on OA and DTX1

It has been demonstrated that polymeric resins can be used as receiving phase in passive samplers designed for the detection of lipophilic marine toxins at sea and was referred to as solid phase adsorption toxin tracking (SPATT). The present study describes the uptake and desorption behaviour of the lipophilic marine toxins okadaic acid (OA) and dinophysistoxin-1 (DTX1) from Prorocentrum lima cultures by five styrene—divinylbenzene based polymeric resins Sepabeads^® SP850, Sepabeads^® SP825L, Amberlite^® XAD4, Dowex^® Optipore^® L-493 and Diaion^® HP-20. All resins accumulated OA and DTX1 from the P. lima culture with differences in adsorption rate and equilibrium rate. Following statistical evaluation, HP-20, SP850 and SP825L demonstrated similar adsorption rates. However, possibly due to its larger pore size, the HP-20 did not seem to reach equilibrium within 72 h exposure as opposed to the SP850 and SP825L. This was confirmed when the resins were immersed at sea for 1 week on the West Coast of Ireland. Furthermore, this work also presents a simple and efficient extraction method suitable to SPATT samplers exposed to artificial or natural culture media.     

Fermentation and recovery of glutamic acid from palm waste hydrolysate by Ion-exchange resin column

Glutamic acid produced from palm waste hydrolysate by fermentation with Brevibacterium lactofermentum ATCC 13869 is produced with a remarkably high yield compared with that produced from pure glucose as a carbon source. The produce yield is 70 g/L with glucose, wherease, when palm waste hydrolysate is the fermentation medium in the same bioreactor under same conditions, it is 88 g/L. The higher yield may be attributed to the fact that this organism has the ability to convert sugars other than only glucose present in the hydrolysate. Bioreactor conditions most conducive for maximum production are pH 7.5, temperature of 30 degrees rmentation period of 48 h, inoculum size 6%, substrate concentration of 10 g per 100 mL, yeast extract 0.5 g per 100 mL as a suitable N source, and biotin at a concentration of 10 pg/L. Palm waste hydrolysate used in this study was prepared by enzymic saccharification of treated palm press fiber under conditions that yielded a maximum of 30 g/L total reducing sugars. Glutamic acid from fermentation broth was recovered by using a chromatographic column (5cm x 60 cm) packed with a strong ion-exchange resin. The filtered broth containing glutamic acid and other inorganic ions was fed to the fully charged column. The broth was continuously recycled at a flow rate of 50 mL/min (retention time of 55 min) until glutamic acid was fully adsorbed on the column leaving other ions in the effluent. Recovery was done by eluting with urea and sodium hydroxide for total displacement of glutamic acid from the resin. The eluent containing 88 g/L of glutamic acid was concentrated by evaporation to obtain solid crystals of the product. (c) 1995 John Wiley & Sons, Inc.     

树脂载体固定S-腺苷甲硫氨酸合成酶的研究

目的:筛选一种适合S-腺苷甲硫氨酸合成酶固定化的树脂载体,进行固定化工艺优化及固定化酶性质研究。方法:以固定化率和表观酶活回收率为指标,筛选固定化效果最佳的一种树脂,采用单因素实验对固定化条件进行优化。结果:阴离子交换树脂载体ESR-2表现出最优的固定化率(94.03%)和酶活回收率(47.45%);最佳固定化条件为加酶量4U/g、pH 8.0、15℃吸附10h,最佳条件下固定化酶表观酶活为2.1U/g,表观酶活回收率达51.6%。固定化酶的最适pH为8.5,最适温度为35℃,连续反应10批次后酶活剩余77.92%。结论:树脂载体ESR-2固定化S-腺苷甲硫氨酸合成酶酶活及稳定性较好,能够用于S-腺苷甲硫氨酸的工业化大规模生产。     

从酵母中提取谷胱甘肽的初步研究

考察了不同提取方法对从酵母中提取谷胱甘肽（ＧＳＨ）的影响,热水抽提由于其提取收率高（９０％）,耗时短（１０ｍｉｎ）经济性强而明显优于其它提取方法,对７３２阳离子交换树脂纯化ＧＳＨ进行了初步研究,主要研究了树脂颗粒大小对提纯ＧＳＨ的影响,采用６０～８０目的树脂,ＧＳＨ收率为５７．６％,虽然比８０目以上的树脂低１０％但前者操作作所需时间只有后者的１／３。     

用732阳离子交换树脂柱提取碱性氨基酸工艺研究

本文是从棉籽饼粕中,应用７３２阳离子树脂柱提取碱性氨基酸。研究结果表明,碱性氨基酸与中性氨基酸之间交叉部分较小。因此,本法即简化了提取工序,又缩短了操作时间,大大提高了氨基酸的分离效果。     

大孔树脂吸附与反相色谱纯化恩拉霉素

恩拉霉素作为多肽类抗生素,是一种新型、安全的饲料添加剂。本文建立了一条基于大孔树脂初纯和反相色谱精制的分离纯化工艺。该工艺路线首先使用AB-8大孔树脂在0.012 mol/L盐酸溶液-甲醇(50:50,V/V)缓冲液条件下洗脱实现恩拉霉素初步纯化,再使用制备型C18反相色谱柱在0.05 mol/L磷酸二氢钠-乙腈(70:30,V/V)(p H 4.5)缓冲液洗脱下实现恩拉霉素a和b的有效分离,a、b两个组分纯度分别达到98.5%和98.0%,a和b两种有效成分的总收率为29.2%。本研究为恩拉霉素a和b两种纯品的制备以及高纯度恩拉霉素产品的生产提供了参考。     

吸附树脂AB—8对甘草酸的吸附性能及其在提取纯化中的应用

考察了大孔吸附树脂AB-8对甘草酸的吸附性能和原液浓度pH值、流速、洗脱剂的种类对树脂吸附性能的影响。结果表明,AB-8树脂对甘草酸吸附量高,易于洗脱,分离效果较好,回收率较一般方法高,达70％～80％,纯度达90％以上。     

大孔吸附树脂对紫锥菊提取物中菊苣酸分离纯化的研究

采用大孔吸附树脂分离纯化紫锥菊提取物中免疫活性成分菊苣酸,7％(v／v)的甲醇-水溶液洗脱,HPLC法对产品中菊苣酸含量进行检测分析。该法能把紫锥菊提取物中菊苣酸含量(4％)提高9倍左右,回收率达到95％以上,且操作简单,可用于菊苣酸的分离纯化。     

大孔树脂纯化岩高兰多酚的工艺研究

为获得大孔树脂纯化岩高兰多酚的最佳工艺,以岩高兰的地上部分为原料,通过考察6种不同类型树脂(HPD-100、X-5、AB-8、D101、HPD-600、NKA-II)的含水率、吸附率和解吸率的大小,筛选出一种最适合纯化岩高兰多酚的树脂。在此基础上,选择对纯化工艺影响较大的4种因素(上样浓度、乙醇浓度、洗脱流速、洗脱体积),进行响应面法分析得到最佳工艺。结果表明:HPD-600型大孔树脂对岩高兰多酚的纯化效果最佳,其最优工艺参数为:上样浓度0.84 mg·mL^-1;乙醇浓度62.15%;洗脱流速0.67 mL·min^-1;洗脱体积2.71 BV。该条件下,岩高兰多酚的提取率为229.18 mg·g^-1,岩高兰多酚的纯度由8.11%提高到22.56%,回收率为67.78%。本研究为岩高兰多酚的纯化工艺提供了新的技术路线,也可为岩高兰提取物的研究和应用提供参考。