Boosting Superior Lithium Storage Performance of Alloy‐Based Anode Materials via Ultraconformal Sb Coating–Derived Favorable Solid‐Electrolyte Interphase

Alloy materials such as Si and Ge are attractive as high‐capacity anodes for rechargeable batteries, but such anodes undergo severe capacity degradation during discharge–charge processes. Compared to the over‐emphasized efforts on the electrode structure design to mitigate the volume changes, understanding and engineering of the solid‐electrolyte interphase (SEI) are significantly lacking. This work demonstrates that modifying the surface of alloy‐based anode materials by building an ultraconformal layer of Sb can significantly enhance their structural and interfacial stability during cycling. Combined experimental and theoretical studies consistently reveal that the ultraconformal Sb layer is dynamically converted to Li₃Sb during cycling, which can selectively adsorb and catalytically decompose electrolyte additives to form a robust, thin, and dense LiF‐dominated SEI, and simultaneously restrain the decomposition of electrolyte solvents. Hence, the Sb‐coated porous Ge electrode delivers much higher initial Coulombic efficiency of 85% and higher reversible capacity of 1046 mAh g^?1 after 200 cycles at 500 mA g^?1, compared to only 72% and 170 mAh g^?1 for bare porous Ge. The present finding has indicated that tailoring surface structures of electrode materials is an appealing approach to construct a robust SEI and achieve long‐term cycling stability for alloy‐based anode materials.     

Emerging 2D Layered Materials for Perovskite Solar Cells

Perovskite solar cells (PSCs) are now at the forefront of the state‐of‐the‐art photovoltaic technologies due to their high efficiency and low fabrication costs. To further realize the potential of this fascinating class of solar cells, nanostructured functional materials have been playing important roles. 2D layered materials have attracted a great deal of interest due to their fascinating properties and unique structure. Recently, the exploration of a wide range of novel 2D materials for use in PSCs has seen considerable progress, but still a lot remains to be done in this field. In this progress report, the advancements that have recently been made in the application of these emerging 2D materials, beyond graphene, for PSCs are presented. Both the advantages and challenges of these 2D materials for PSCs are highlighted. Finally, important directions for the future advancements toward efficient, low‐cost, and stable PSCs are outlined.     

Redox‐Active Organic Compounds for Future Sustainable Energy Storage System

Utilizing redox‐active organic compounds for future energy storage system (ESS) has attracted great attention owing to potential cost efficiency and environmental sustainability. Beyond enriching the pool of organic electrode materials with molecular tailoring, recent scientific efforts demonstrate the innovations in various cell chemistries and configurations. Herein, recent major strategies to build better organic batteries, are highlighted: diversifying charge‐carrying ions, modifying electrolytes, and utilizing liquid‐type organic electrodes. Each approach is summarized along with their advantages over Li‐ion batteries (LIBs). An outlook is also provided on the practical realization of organic battery systems, which hints at possible solutions for future sustainable ESSs.     

Photoluminescence and piezoelectric behaviour of Y2Zr2O7 pyrochlore‐based multifunctional materials and the influence of Eu3+ and Sm3+

Y₂Zr₂O₇‐doped with Eu³⁺ and Sm³⁺ phosphors were prepared for the first time as multifunctional smart materials using a solid‐state reaction method at 1400^oC. Thermal behaviour, crystal structure, surface morphology, and elemental analysis were characterized using thermogravimetric (TG) and differential thermal (DTA) analyses, X‐ray diffraction (XRD) and scanning electron microscope equipped with energy‐dispersive X‐ray spectroscopy (SEM‐EDX). Experimental results revealed that both phosphors have a pyrochlore structure with a cubic crystal system. Photoluminescence properties were also measured and red emission was observed from Y_1.90Eu_0.10Zr₂O₇ and Y_1.90Sm_0.10Zr₂O₇ phosphors. Dielectric constant, loss tangent, piezoelectric charge constant, and Curie temperature of all the samples were determined using an LCR‐meter, d₃₃‐meter, and TG/DTA. Eu doping in Y₂Zr₂O₇ resulted in a high dielectric constant (9.61) and low loss tangent (1.67%) values, whereas high piezoelectric charge constant (0.68 pC/N) and high Curie temperature (820°C) could be obtained using Sm‐doped Y₂Zr₂O₇.     

A novel electroconductive interface based on Fe3O4 magnetic nanoparticle and cysteamine functionalized AuNPs: Preparation and application as signal amplification element to minoring of antigen‐antibody immunocomplex and biosensing of prostate cancer

In this study, a novel electroconductive interface was prepared based on Fe₃O₄ magnetic nanoparticle and cysteamine functionalized gold nanoparticle. The engineered interface was used as signal amplification substrate in the electrochemical analysis of antibody‐antigen binding. For this purpose, biotinilated‐anti‐prostate‐specific antigen (PSA) antibody was bioconjugated with iron oxide magnetic nanoparticles (Fe₃O₄) and drop‐casted on the surface of glassy carbon electrode (GCE). Also, secondary antibody (HRP‐Ab2) encapsulated on gold nanoparticles caped by cysteamine was immobilized on the surface of GCE modified electrode. A transmission electron microscopy images shows that a sandwich immunoreaction was done and binding of Ab1 and Ab2 performed successfully. Various parameters of immunoassay, including the loading of magnetic nanoparticles, the amount of gold nanoparticle conjugate, and the immunoreaction time, were optimized. The detection limit of 0.001 μg. L^?1 of PSA was obtained under optimum experimental conditions. It is found that such magneto‐bioassay could be readily used for simultaneous parallel detection of multiple proteins by using multiple inorganic metal nanoparticle tracers and are expected to open new opportunities for early stage diagnosis of cancer in near future.     

生物基分子介导纳米金属材料的制备及其应用

纳米金属材料具有纳米晶强化效应、光吸收率大、较高的表面能和单磁畴性能等优点,因其在医药、化学催化、抗菌抑毒等方面发挥着越来越重要的作用而受到人们广泛关注。近年来,随着全球石化资源消耗与日俱增,环境污染加剧,基于可再生资源的生物基分子介导纳米材料的制备研究方兴未艾。生物基分子是指直接或间接来源于生物质的小分子或大分子物质,它们多数具有生物相容性好、低毒、可降解、来源广泛、价格低廉等优点。且由于生物基分子多数具有独特的理化性质,如具有生理活性的旋光性、酸碱两性、亲水亲油性以及易与金属离子络合等,其介导合成的纳米材料还兼具其独特功能性,比如消炎、抗癌、抗氧化、抗病毒以及降血糖血脂等,进一步拓宽了纳米金属材料的应用领域。文中对近年来基于生物基分子介导纳米金属材料的制备及应用进行全面综述,为开展相关研究提供参考。     

Les sites acheuléens des grottes la Terrasse et du Coupe-Gorge, à Montmaurin,Haute Garonne,France

The huge karstic network of Montmaurin is located at the western end of the chain of the Petites Pyrenées, and contained several caves escavated by Louis Méroc and his team to 1946 at 1961. Among the eight caves that have escaped the exploitation of quarrymen the richest in stone industry and fauna are the caves la Terrasse and le Coupe-Gorge which are Acheulean sites. The techno-typological and petro-archaeological study conducted during this research shows the specificities inherent to the Montmaurin caves. The lithological procession is composed of pebbles quartzite lydian quartz etc. that come from the tributaries of the Garonne and pre-Pyrenean flint. The acquisition territories of mineral resources are more or less vast, from a hundred meters to about 80 kilometers. The techno-typological characteristics of the Montmaurin cave's industries testify a technical and economic behavior oriented towards production and consumption activities in situ. Differential management of lithic resources is observed, which echoes both the technical requirements imposed by the debitage methods employed and the knapping skills.