Variation in faecal digestibility values related to feed efficiency traits of grower-finisher pigs

Providing pigs a diet that matches their nutrient requirements involves optimizing the diet based on the nutrient digestibility values of the considered feed ingredients. Feeding the same quantity of a diet to pigs with similar BW but with different requirements, however, can result in a different average daily gain (ADG) and backfat thickness (BF) between pigs. Digestibility may contribute to this variation in efficiency. We investigated variation in feed efficiency traits in grower-finisher pigs associated with variation in faecal digestibility values, independent of feed intake at the time of measuring faecal digestibility. Considered traits were ADG, average daily feed intake (ADFI), feed conversion ratio (FCR), BF and residual feed intake (RFI). Feed intake, BW, and BF data of one hundred and sixty three-way crossbreed grower-finisher pigs (eighty female and eighty male) were collected during two phases, from day 0 of the experiment (mean BW 23 kg) till day 56 (mean BW 70 kg) and from day 56 to slaughter (mean BW 121 kg). Pigs were either fed a diet based on corn/soybean meal or a more fibrous diet based on wheat/barley/by-products, with titanium dioxide as indigestible marker. Faecal samples of one hundred and five pigs were collected on the day before slaughter and used to determine apparent faecal digestibility of DM, ash, organic matter (OM), CP, crude fat (CFat), crude fibre (CF), and to calculate the digestibility of nonstarch polysaccharides (NSPs) and energy (E). The effects of diet, sex and covariate feed intake at sampling (FIs) on faecal digestibility values were estimated and were significant for all except for CFat. Faecal digestibility values of each individual pig determined at the day before slaughter, corrected for diet, sex and FIs, were used to estimate their association with ADG, ADFI, FCR, BF, and RFI. In the first phase, a one percent unit increase in faecal digestibility of DM, ash, OM, E, CP, CFat, CF, NSP, and Ash individually was related to 0.01–0.03 unit reduction in FCR and 6–23 g/day reduction in RFI. A unit increase in CP digestibility was related to 0.1 mm increase in BF and 10 g/day increase in ADG. In the second phase, a one percent unit increase in faecal digestibility of DM, CP and Ash was related to a decrease of 16–20 g/day in RFI. In conclusion, the relationship between variation in feed efficiency traits and faecal digestibility values is different across the developmental stages of a pig.     

Design a system for measuring individual cow feed intake in commercial dairies

Monitoring individual cow feed intake is necessary for calculating the cow individual feed efficiency. The cost and maintenance time necessary for research systems make them impractical for most of the commercial producers. We developed a measurement system with producer convenience and low investment as key design criteria. The goal of this study was to design the system and validate its ability to rank cows by their feed conversion efficiency in commercial farms. The new system consisted of three principal parts: (a) a hanging weighing system, (b) a visual cow identification system and (c) an automatic cleaning system. The weighing system consisted of hanging a single load cell to provide feed mass measurements. The image-based cow identification system (replacing Radio-Frequency Identification) entailed cameras installed above the feeding area and an image processing algorithm that recognized cows by their collar numbers. The new system worked within normal farm routines: the feed supplying truck distributed the animal feed, and a tractor cleaned feed residual. To validate the accuracy and convenience of the system and to rank the cows by their efficiency, an experiment with six scales and 12 cows was conducted in a research barn, succeeded by eight-scale system in a commercial farm with 16 cows. The feed intake of each cow participating in the experiments was monitored for one month. The validation experiment showed that the system had the following specification: scales were accurate within 120 g; the visual cow identification rate was greater than 96%; feeding duration was accurate to 52 s; and routine farm practices (feed distribution, pushing, and residual removal) continued as usual. The cost for a feeding station (utilized consequently for a number of cows) was about 1 500 USD. An example of application of the system to rank cows by their efficiency under commercial conditions was shown. The system can potentially be used for ranking cows by their efficiency in commercial facilities.     

Better alone? A demographic case study of the hemiparasite Castilleja tenuiflora (Orobanchaceae): A first approximation

Castilleja tenuiflora is a facultative root hemiparasitic plant that has colonized a disturbed lava field in central Mexico. To determine the effects of hemiparasitism on the population dynamics of the parasite, we identified a set of potential hosts and quantified their effects on the vital rates of C. tenuiflora during 2016–2018. Connections between the roots of the hemiparasite and the hosts were confirmed with a scanning electron microscope. Annual matrices considering two conditions (with and without potential hosts) were built based on vital rates for each year, and annual stochastic finite rate growth rates (λ_s) were calculated. Plants produced more reproductive structures with hosts than without hosts. A Life Table Response Experiment (LTRE) was performed to compare the contributions of vital rates between conditions. We identified 19 species of potential hosts for this generalist hemiparasite. Stochastic lambda with hosts λ_s = 1.02 (CI = 0.9999, 1.1) tended to be higher than without them λ_s = 0.9503 (CI = 0.9055, 0.9981). The highest elasticity values correspond to survival. LTRE indicated that the most important parameters are survival and fecundity; the total contribution of fecundity (0.0192) to the difference in growth was three times lower than that of survival (0.0603). Piqueria trinervia was the most abundant host, and C. tenuiflora had a higher lambda with it than with other species. Individuals can grow alone, but hosts can have a positive effect on the vital parameters of C. tenuiflora and on λ.     

Dietary intake of artificial food color additives containing food products by school-going children

Nutritional risk in children is associated with food safety. This is the first study to identify the food type consumed by 6–17-year-old school-going children in Saudi Arabia. Eight permitted artificial food color additives, including Tartrazine (E102), Sunset Yellow (E110), Carmoisine (E122), Allura Red (E129), Indigo Carmine (E132), Brilliant Blue (E133), Fast Green (E143), and Black PN (E151), and two non-permitted ones, Erythrosine (E127) and Red 2G (E128), were determined using 24-h dietary recall questionnaires. Artificial color additives in 839 food products were divided into nine categories, including biscuits, cakes, chocolates, chips, ice cream, juices and drinks, candy, jelly, and chewing gum, are determined using high performance liquid chromatography and diode array detector. The results indicated a high intake of juices and drinks, ice cream, and cakes, but low consumption of chewing gum among school-going children. Among the permitted artificial food color additives, Brilliant Blue (E133) (54.1%) and Tartrazine (E102) (42.3%) were the most commonly used. Sunset Yellow (E110) in one chocolate sample, Tartrazine (E102) and Sunset Yellow (E110) in one and two juice and drink samples, respectively, and Brilliant Blue (E133) in two candy samples exceeded the permitted level. Therefore, further investigations are needed to provide insights into the possible adverse health effects of high intake of these additives in artificial food coloring on the test population are warranted.     

Desulfurization of dibenzothiophene using the 4S enzymatic route: Influence of operational conditions on initial reaction rates

The influence of operational conditions (pH, temperature and oxygen transfer rate) on the initial reaction rates of the four reactions involved in the 4S biodesulfurization route of dibenzothiophenes (DBT) has been studied. The bioprocess was carried out using a genetically modified organism, Pseudomonas putida CECT 5279. The rates of the four reactions were calculated from the rates of production of different compounds involved in the 4S pathway, by matrix manipulation. The initial (zero time) reaction rates showed a slight dependence on oxygen transfer rate. Temperature and pH were optimal at 30°C and 9, respectively, temperature being the most important variable. This study also identifies the last reaction as the limiting step in the pathway.     

Planting methods matter for cost‐effective rainforest restoration

Forest restoration efforts in Australia's Wet Tropics establish <100 ha/year, compared with 20‐year average clearing rates of 1661 ha/year. Establishment costs are serious impediments to restoration efforts. Costs range from $25,000 to $67,000/ha, compared with less than $5,000/ha in other areas using other methods. Some of this difference stems from methods used to plant trees. Augered holes are used commonly in environmental plantings, whereas planting spades are used mostly in forestry plantings. To determine the most cost‐effective planting method between auger and spade planting methods, we compared the planting costs and the survival and growth of seedlings of local rainforest species, The speed of planting with a spade is on average four times quicker than with an auger, whereas the survival (range = 89–94%, spade vs auger respectively), and growth (slightly greater height growth for auger planted individuals) rates were only marginally different. Given these results, using planting spades is a cost‐effective alternative to augering holes.     

The broader evolutionary lessons to be learned from a comparative and phylogenetic analysis of primate muscle morphology

The present publication reviews the broader evolutionary implications of our long‐term study of primate musculature. It summarizes the implications of the study for our understanding of the use of myological characters for phylogenetic reconstruction, for assessing the importance of homoplasy and reversions in evolution, and for our understanding of Dollo's law, the notion of ‘direction’ in evolution, the common myth of human complexity, the tempo and mode of primate and human evolutionary history, adaptive radiations, the notion that ‘common’ equals ‘primitive’ and the influence of morphogenesis on the variability of head, neck, pectoral and upper limb muscles. Among other results our study shows that myological characters are useful for phylogenetic reconstruction. The results also stress the importance of homoplasy and of evolutionary reversions in morphological evolution, and they provide examples of reversions that violate Dollo's law due to the retention of ancestral developmental pathways. They also show that contrary to the idea of a ‘general molecular slow‐down of hominoids’ the rates of muscle evolution at the nodes leading to and within the hominoid clade are higher than those in most other primate clades. However, there is no evidence of a general trend or ‘directionality’ towards an increasing complexity during the evolutionary history of hominoids and of modern humans in particular, at least regarding the number of muscles or of muscle bundles. The rates of muscle evolution at the major euarchontan and primate nodes are different, but within each major primate clade (Strepsirrhini, Platyrrhini, Cercopithecidae and Hominoidea) the rates at the various nodes, and particularly at the nodes leading to the higher groups (i.e. those including more than one genus) are strikingly similar. Our results also support, in general terms, the assumption that ‘common is primitive’ and they lend some support for the ‘vertebrate‐specific model’ in the sense that during the divergent events that resulted in these four major primate clades there was more emphasis on postcranial changes than on cranial changes. Our study of primates does not, however, support suggestions that the distal structures of the upper limb are more prone to variation than the proximal ones, or that the topological origins of the upper limb muscles are more prone to evolutionary change than their insertions.     

The western painted turtle genome,a model for the evolution of extreme physiological adaptations in a slowly evolving lineage

Background

We describe the genome of the western painted turtle, Chrysemys picta bellii, one of the most widespread, abundant, and well-studied turtles. We place the genome into a comparative evolutionary context, and focus on genomic features associated with tooth loss, immune function, longevity, sex differentiation and determination, and the species'' physiological capacities to withstand extreme anoxia and tissue freezing.

Results

Our phylogenetic analyses confirm that turtles are the sister group to living archosaurs, and demonstrate an extraordinarily slow rate of sequence evolution in the painted turtle. The ability of the painted turtle to withstand complete anoxia and partial freezing appears to be associated with common vertebrate gene networks, and we identify candidate genes for future functional analyses. Tooth loss shares a common pattern of pseudogenization and degradation of tooth-specific genes with birds, although the rate of accumulation of mutations is much slower in the painted turtle. Genes associated with sex differentiation generally reflect phylogeny rather than convergence in sex determination functionality. Among gene families that demonstrate exceptional expansions or show signatures of strong natural selection, immune function and musculoskeletal patterning genes are consistently over-represented.

Conclusions

Our comparative genomic analyses indicate that common vertebrate regulatory networks, some of which have analogs in human diseases, are often involved in the western painted turtle''s extraordinary physiological capacities. As these regulatory pathways are analyzed at the functional level, the painted turtle may offer important insights into the management of a number of human health disorders.     

THE PROCESSING OF UNCONFINED,NATURALLY ENTRAINED LEAVES IN TWO LOW-ORDER SOUTHERN AFRICAN MOUNTAIN STREAMS

Summary

Breakdown of unconfined and confined leaves of the riparian tree Brabejum stellatifolium L. was investigated in two low order mountain streams (Window Stream and Langrivier) in the southwestern Cape, South Africa. At both sites, 5000 unconfined leaves were released in April and another 5000 in December 1990. The leaves were marked and half of them presoaked in river water prior to release. Leaves reaching a net 100 m below the point of release were removed periodically. On termination of the experiments, the study reaches were cleared of the remaining marked leaves. The distance which these leaves had travelled, and the retentive feature at which they were found were recorded. All leaves were weighed after recovery. In December 1990, leaves confined in coarse-mesh bags were placed on the stream beds of the two sites. Decay rates of unconfined leaves differed between streams and seasons but not between wetted and dry leaves or those of contrasting initial size and weight. In winter, breakdown of unconfined leaves was rapid (t₅₀ of 6.6d and 23.9d for Langrivier and Window Stream respectively). In summer, breakdown of unconfined leaves was slower (t₅₀ of 58d, Langrivier), but more rapid than leaves confined in mesh bags (t₅₀ of 77d, Langrivier). Distance travelled downstream had no significant effect on leaf breakdown. Different retentive features resulted in different rates of decay. Leaf weight loss in winter and summer at both sites was greatest in riffles (17–80%) and runs (21–78%). In all cases, stranded (exposed and out of the water) leaves lost the least weight (4–38%).