The impacts of agricultural payments on groundwater quality: Spatial analysis on the case of Slovenia

The European Common Agricultural Policy still follows its primary goals, i.e. quality food at affordable prices and a decent standard of living for farmers, fifty years after its adoption. Moreover, this policy adapts to the changing needs of society and the new challenges, mostly preservation of the environment, nature and biodiversity in rural areas. Although the Common Agricultural Policy receives the largest share of European budget, the funds are decreasing over time, especially direct payments, which aim to provide basic income support to farmers in the European Union. On the other hand, agri-environmental payments are gaining importance. Policy decision-makers should be interested in the question of impacts of growing eco-conditionality of agricultural spending. New insights would help them to be successful in achieving the goals of sustainable agriculture. The purpose of this paper is to estimate the impacts of production support payments and rural development payments on the quality of groundwater. We use the small EU country Slovenia as an example. The baseline indicators are the level of nitrates and pesticides in groundwater, while the impacts were estimated using spatial error model. The results show that direct payments, coupled subsidies and investment grants raise the level of pesticides in groundwater, but do not have any statistically significant impact on the level of nitrates in groundwater. Furthermore, we did not find any statistically significant effects of agri-environmental payments on decrease of groundwater pollution with nitrates. However, our findings revealed that agri-environmental payments are effective in reducing pesticides in groundwater, although only to a limited extent. These results imply a problem of insufficient targeting of agri-environmental measures on the one hand, and suggest that greening of direct payments is necessary and entirely justified.     

High frequency residues: A new set of signals for detectability studies of an X-ray imaging system

A new set of signals for studying detectability of an X-ray imaging system is presented. The results obtained with these signals are intended to complement the NEQ results.The signals are generated from line spread profiles by progressively removing their lower frequency components and the resulting high frequency residues (HFRs) form the set of signals to be used in detectability studies. Detectability indexes for these HFRs are obtained using a non-prewhitening (NPW) observer and a series of edge images are used to obtain the HFRs, the covariance matrices required by the NPW model and the MTF and NPS used in NEQ calculations. The template used in the model is obtained by simulating the processes of blurring and sampling of the edge images. Comparison between detectability indexes for the HFRs and NEQ are carried out for different acquisition techniques using different beam qualities and doses.The relative sensitivity shown by detectability indexes using HFRs is higher than that of NEQ, especially at lower doses. Also, the different observers produce different results at high doses: while the ideal Bayesian observer used by NEQ distinguishes between beam qualities, the NPW used with the HFRs produces no differences between them.Delta functions used in HFR are the opposite of complex exponential functions in terms of their support in the spatial and frequency domains. Since NEQ can be interpreted as detectability of these complex exponential functions, detectability of HFRs is presented as a natural complement to NEQ in the performance assessment of an imaging system.     

Wood preservation hygiene and environment in the lime-light of actually

Summary Under the ?Bois plus? scheme, the CTBA is currently developing a third party certification, based on the Scrivener law, with the aim of defending the consumers' interests. At this early stage, wood preservatives and treated wood are checked for the efficacy of treatments in order to ensure the stability and security of works in buildings and civil engineering. According to the different classes of risks in service, ?Bois plus? provides the most adeguate level of protection. In the close future, the industry is planning to incorporate, with the help of the CTBA and experts, health criteria within the frame of the ?Bois plus? certification scheme. The means could beSafety indexes, which are objectives of quality for professionals.Safety indexes are concentrations of substances in wood which can be taken as safe for humans and the general environment, while still toxic for the wood pests. This attractive experience aims to make with the brandname ?Bois plus? a synonym of efficacy and safety. This approach meets the essential requirements 1, 3, 4 of the 89/106 EEC directive: mechanical resistance and stability/hygiene, health and environment/safety in use.     

Development of an epiphyte indicator of nutrient enrichment: A critical evaluation of observational and experimental studies

An extensive review of the literature describing epiphytes on submerged aquatic vegetation (SAV), especially seagrasses, was conducted in order to evaluate the evidence for response of epiphyte metrics to increased nutrients. Evidence from field observational studies, together with laboratory and field mesocosm experiments, was assembled from the literature and evaluated for a hypothesized positive response to nutrient addition. There was general consistency in the results to confirm that elevated nutrients tended to increase the load of epiphytes on the surface of SAV, in the absence of other limiting factors. In spite of multiple sources of uncontrolled variation, positive relationships of epiphyte load to nutrient concentration or load (either nitrogen or phosphorus) often were observed along strong anthropogenic or natural nutrient gradients in coastal regions. Such response patterns may only be evident for parts of the year. Results from both mesocosm and field experiments also generally support the increase of epiphytes with increased nutrients, although outcomes from field experiments tended to be more variable. Relatively few studies with nutrient addition in mesocosms have been done with tropical or subtropical species, and more such controlled experiments would be helpful. Experimental duration influenced results, with more positive responses of epiphytes to nutrients at shorter durations in mesocosm experiments versus more positive responses at longer durations in field experiments. In the field, response of epiphyte biomass to nutrient additions was independent of climate zone. Mesograzer activity was a critical covariate for epiphyte response under experimental nutrient elevation, but the epiphyte response was highly dependent on factors such as grazer identity and density, as well as nutrient and ambient light levels. The balance of evidence suggests that epiphytes on SAV will be a useful indicator of persistent nutrient enhancement in many situations. Careful selection of appropriate temporal and spatial constraints for data collection, and concurrent evaluation of confounding factors will help increase the signal to noise ratio for this indicator.     

Impact of seminal and serum zinc on semen quality and hormonal status: A population-based cohort study of Russian young men

BackgroundTrace elements are important factors in human reproductive health. Among them, special attention is paid to zinc, which is an essential trace element and is necessary for the normal functioning of the male reproductive system and the process of spermatogenesis. The aim of the study was to investigate the association between seminal and serum zinc concentrations and semen quality and reproductive hormone levels in population of Russian young men.MethodsThe study population consisted of 626 young Russian men (median age 22.5 years), recruited from the general population, regardless of their fertility status. Each participant provided semen and blood sample, information about his lifestyle and ethnicity. Semen quality (sperm concentration, motility and morphology), reproductive hormone levels (testosterone, estradiol, LH, FSH and inhibin B), and serum and seminal zinc concentrations were evaluated. The semen samples were analyzed according to the WHO laboratory manual (WHO, 2010). Serum hormones were measured by enzyme immunoassay, zinc concentrations were determined using spectrophotometry and direct colorimetry without deproteinization.ResultsZinc was present in the seminal plasma in a significantly higher concentration than in the blood serum (median serum Zn concentration was 23.6 μmol/L vs seminal Zn concentration 1571.8 μmol/L). The seminal zinc concentration was positively related to the total sperm count, sperm concentration, progressive motility and normal morphology (Spearman’s test: 0.221; 0.286; 0.269; 0.183, respectively, p < 0.001), while the serum Zn concentration was negatively related to serum testosterone and estradiol levels (r = −0.249 and r = −0.096, respectively, p < 0.001−0.05). It was found that the seminal Zn content in men with normal semen quality was higher compared to men with lowered semen quality (means: 6.37 and 5.03 μmol/ejaculate, respectively, p < 0.001). Similarly, the semen volume, total sperm count, sperm concentration, progressive motility, normal morphology and the serum testosterone level in men with the seminal Zn deficiency were lower than in men with the normal seminal Zn content.ConclusionBased on the results of our population-based study, seminal Zn levels were closely associated with semen parameters in young men, so Zn deficiency may be an important risk factor for lowered semen quality. Seminal Zn determinations should be considered as a useful tool in addition to other parameters in assessing male fertility.     

Standardizing Immunohistochemistry: A New Reference Control for Detecting Staining Problems

A new standardized immunohistochemistry (IHC) control for breast cancer testing comprises formalin-fixed human epidermal growth factor receptor 2, estrogen receptor, or progesterone receptor peptide antigens covalently attached to 8-µm glass beads. The antigen-coated beads are suspended in a liquid matrix that hardens upon pipetting onto a glass microscope slide. The antigen-coated beads remain in place through deparaffinization, antigen retrieval, and immunostaining. The intensity of the beads’ stain provides feedback regarding the efficacy of both antigen retrieval and immunostaining. As a first report, we tested the sensitivity and specificity of the new IHC controls (“IHControls”). To evaluate sensitivity, various staining problems were simulated. IHControls detected primary and secondary reagent degradation similarly to tissue controls. This first group of IHControls behaved similarly to tissue controls expressing high concentrations of the antigen. The IHControls were also able to detect aberrations in antigen retrieval, as simulated by sub-optimal times or temperatures. Specificity testing revealed that each antigen-coated bead was specific for its cognate IHC test antibody. The data support the conclusion that, like tissue controls, IHControls are capable of verifying the analytic components of an immunohistochemical stain. Unlike tissue controls, IHControls are prepared in large bulk lots, fostering day-to-day reproducibility that can be standardized across laboratories.     

Feedbacks between nutrient cycling and vegetation predict plant species coexistence and invasion

To investigate the role of species‐specific litter decomposability in determining plant community structure, we constructed a theoretical model of the codevelopmental dynamics of soil and vegetation. This model incorporates feedback between vegetation and soil. Vegetation changes the nutrient conditions of soil by affecting mineralization processes; soil, in turn, has an impact on plant community structure. The model shows that species‐level traits (decomposability, reproductive and competitive abilities) determine whether litter feedback effects are positive or negative. The feedback determines community‐level properties, such as species composition and community stability against invasion. The model predicts that positive feedback may generate multiple alternative steady states of the plant community, which differ in species richness or community composition. In such cases, the realized state is determined by initial abundance of co‐occurring species. Further, the model shows that the importance of species‐level traits depends on environmental conditions such as system fertility.     

A comparison of three noise reduction procedures applied to bird vocal signals

ABSTRACT.   Recordings of avian vocal signals in natural habitats include ambient noise. Often this background noise corrupts across all frequencies and is of substantial amplitude. Reducing this ambient noise to prepare vocal signals for playback stimuli or to remove habitat-specific noise signatures prior to analyzing a signal's acoustic characteristics can be useful. We conducted experimental evaluations of three noise reduction procedures to determine their effectiveness. We embedded two bird vocalizations ("clean" signals) in four kinds of natural noise, resulting in eight noise-signal combinations. We then applied three noise reduction procedures (Noise Profile, Band Pass, and Noise Estimate) to each of the embedded signals and compared the recovered signals to the original (clean) signals. Noise Profile filtering was effective in reducing noise and returning fairly high-quality signals from even severe levels of masking noise. The other two noise reduction procedures did not perform as well. For the two most corrupting maskers, however, Noise Profile filtering also altered the signal properties by reducing signal amplitude at those frequencies containing high levels of noise. Apart from this loss of amplitude, the quantitative features of the filtered signals were similar to those of the original model sounds. We conclude that Noise Profile filtering produces good results for cases where noise is approximately constant over the signal duration and the signal intensity exceeds noise intensity over the frequencies of interest.