Influence of level of inclusion of Azolla leaf meal on growth performance,meat quality and skeletal muscle p70S6 kinase α abundance in broiler chickens

The interest in biodiesel production from oil-bearing seeds rather than soybean necessitates the scientific validation of other good quality protein sources that could substitute soybean meal in animal diets, particularly, broiler chickens where soybean meal constitutes a large portion of their diet. Therefore, the present study was conducted to investigate the effect of sun-dried Azolla leaf meal (ALM) as an unconventional dietary protein source in broiler chicken diet on growth performance, meat quality, skeletal muscle cell growth and protein synthesis through regulation of ribosomal protein S6 kinase (p70S6 kinase α). A total of 120 male Ross 308 broiler chicks were randomly allocated to three dietary treatments. Each treatment had four cages (i.e. replicates) with 10 birds/cage. The control group was fed with a corn–soy-based diet, the AZ5 group was supplemented with 5% ALM and the AZ10 group was supplemented with 10% ALM for 37 days. A 5-day trial was also conducted to measure the apparent nutrient digestibility. Growth performance parameters were measured weekly. At the end of the experiment, 12 birds from each group (3/cage) were euthanized and used for samplings. Inclusion of ALM tended to improve BW gain (P = 0.06) and increased feed intake (P < 0.01). Additionally, ALM decreased the percentage of breast meat cooking loss linearly (P < 0.01). In addition, ALM at a dose of 5% increased the production of propionate in the cecum (P = 0.01). Activation of breast muscle p70S6 kinase was higher when ALM was included in a dose-dependent manner (P < 0.01). The inclusion of ALM increased breast meat redness (P < 0.01); however, the lightness was within the normal range in all groups. Findings from our study suggest that ALM could be included in a broiler chicken diet up to 5% without any major negative effect on meat quality or performance, and it regulates muscle protein synthesis through activation of mammalian target of rapamycin/6S kinase signaling.     

Increasing picocyanobacteria success in shelf waters contributes to long‐term food web degradation

Continental margins are disproportionally important for global primary production, fisheries and CO₂ uptake. However, across the Northeast Atlantic shelves, there has been an ongoing summertime decline of key biota—large diatoms, dinoflagellates and copepods—that traditionally fuel higher tropic levels such as fish, sea birds and marine mammals. Here, we combine multiple time series with in situ process studies to link these declines to summer nutrient stress and increasing proportions of picophytoplankton that can comprise up to 90% of the combined pico‐ and nanophytoplankton biomass in coastal areas. Among the pico‐fraction, it is the cyanobacterium Synechococcus that flourishes when iron and nitrogen resupply to surface waters are diminished. Our field data show how traits beyond small size give Synechococcus a competitive edge over pico‐ and nanoeukaryotes. Key is their ability to grow at low irradiances near the nutricline, which is aided by their superior light‐harvesting system and high affinity to iron. However, minute size and lack of essential biomolecules (e.g. omega‐3 polyunsaturated fatty acids and sterols) render Synechococcus poor primary producers to sustain shelf sea food webs efficiently. The combination of earlier spring blooms and lower summer food quantity and quality creates an increasing period of suboptimal feeding conditions for zooplankton at a time of year when their metabolic demand is highest. We suggest that this nutrition‐related mismatch has contributed to the widespread, ~50% decline in summer copepod abundance we observe over the last 60 years. With Synechococcus clades being prominent from the tropics to the Arctic and their abundances increasing worldwide, our study informs projections of future food web dynamics in coastal and shelf areas where droughts and stratification lead to increasing nutrient starvation of surface waters.     

Promising applications of cold plasma for microbial safety,chemical decontamination and quality enhancement in fruits

Consumers’ demand is increasing for safe foods without impairing the phytochemical and sensory quality. In turn, it has increased research interest in the exploration of innovative food processing technologies. Cold plasma technology is getting popularity now days owing to its high efficacy in decontamination of microbes in fruit and fruit-based products. As a on-thermal approach, plasma processing maintains the quality of fruits and minimizes the thermal effects on nutritional properties. Cold plasma is also exploited for inactivating enzymes and degrading pesticides as both are directly related with quality loss and presently are most important concerns in fresh produce industry. The present review covers the influence of cold plasma technology on reducing microbial risks and enhancing the quality attributes in fruits.     

Can reintroductions to degraded habitat succeed? A test using the common brushtail possum

Habitat degradation contributes to species decline, and habitat quality is an important factor influencing reintroduction success globally. Habitat quality can include a range of physical resources such as nest sites and food resources but also anything that can restrict the use of these resources such as predation risk or competition. In arid Australia, introduced predators are thought to be the primary cause of mammal extinction and reintroduction failure although habitat clearance and alteration are also major causes of population decline. Common brushtail possums are one arid Australian marsupial close to regional extinction. To understand whether habitat quality was limiting their recovery, we reintroduced 148 possums into an area where introduced red foxes were controlled but historic overgrazing had degraded the habitat. We measured both direct (hollow availability, midstorey cover and high‐quality plant foods) and indirect (survival, condition, reproduction, movement) measures of habitat quality. Sixty‐seven released possums and 26 post‐release recruits were radiocollared for up to 2 years after release. Post‐release survival of radiocollared possums was high after 12 months (0.70), and there were no deaths from starvation. Predation by feral cats was the most common cause of mortality, and the open, degraded habitat may have exacerbated predation risk. Continuous breeding, good body condition and comparative home ranges with other sites suggested that food resources were not limiting. Possums used natural tree hollows in Eucalyptus spp. with no use of artificial nest boxes. Results suggest that historically degraded habitat was not a barrier to short‐term reintroduction success when foxes were controlled and natural tree hollows were plentiful. However, demographic data on hollow‐bearing tree species suggest a possible future decline in availability of hollows. These factors, combined with the unknown effects of drought, and synergistic effects of predation and poor quality habitat, suggest long‐term reintroduction success may require improved habitat and cat control.     

Mixed company: a framework for understanding the composition and organization of mixed‐species animal groups

Mixed‐species animal groups (MSGs) are widely acknowledged to increase predator avoidance and foraging efficiency, among other benefits, and thereby increase participants' fitness. Diversity in MSG composition ranges from two to 70 species of very similar or completely different phenotypes. Yet consistency in organization is also observable in that one or a few species usually have disproportionate importance for MSG formation and/or maintenance. We propose a two‐dimensional framework for understanding this diversity and consistency, concentrating on the types of interactions possible between two individuals, usually of different species. One axis represents the similarity of benefit types traded between the individuals, while the second axis expresses asymmetry in the relative amount of benefits/costs accrued. Considering benefit types, one extreme represents the case of single‐species groups wherein all individuals obtain the same supplementary, group‐size‐related benefits, and the other extreme comprises associations of very different, but complementary species (e.g. one partner creates access to food while the other provides vigilance). The relevance of social information and the matching of activities (e.g. speed of movement) are highest for relationships on the supplementary side of this axis, but so is competition; relationships between species will occur at points along this gradient where the benefits outweigh the costs. Considering benefit amounts given or received, extreme asymmetry occurs when one species is exclusively a benefit provider and the other a benefit user. Within this parameter space, some MSG systems are constrained to one kind of interaction, such as shoals of fish of similar species or leader–follower interactions in fish and other taxa. Other MSGs, such as terrestrial bird flocks, can simultaneously include a variety of supplementary and complementary interactions. We review the benefits that species obtain across the diversity of MSG types, and argue that the degree and nature of asymmetry between benefit providers and users should be measured and not just assumed. We then discuss evolutionary shifts in MSG types, focusing on drivers towards similarity in group composition, and selection on benefit providers to enhance the benefits they can receive from other species. Finally, we conclude by considering how individual and collective behaviour in MSGs may influence both the structure and processes of communities.     

Simplification of head and neck volumetric modulated arc therapy patient-specific quality assurance,using a Delta4 PT

Background/AimIn many facilities, intensity-modulated radiation therapy (IMRT), and volumetric modulated arc therapy (VMAT) use intensity-modulated beams, formed by a multi-leaf collimator (MLC). In IMRT and VMAT, MLC and linear accelerator errors (both geometric and dose), can significantly affect the doses administered to patients. Therefore, IMRT and VMAT treatment plans must include the use of patient-specific quality assurance (QA) before treatment to confirm dose accuracy.Materials and methodsIn this study, we compared and analyzed the results of dose verification using a multi-dimensional dose verification system Delta4 PT, an ionization chamber dosimeter, and gafchromic film, using data from 52 patients undergoing head and neck VMAT as the test material.ResultBased on the results of the absolute dose verification for the ionization chamber dosimeter and Delta4 PT, taking an axial view, the upper limit of the 95% confidence interval was 3.13%, and the lower limit was −3.67%, indicating good agreement. These results mean that as long as absolute dose verification for the axial view does not deviate from this range, Delta4 PT can be used as an alternative to an ionization chamber dosimeter for absolute dose verification. When we then reviewed dose distribution verification, the pass rate for Delta4 PT was acceptable, and was less varied than that of gafchromic film.ConclusionThis results in that provided the pass rate result for Delta4 PT does not fall below 96%, it can be used as a substitute for gafchromic film in dose distribution verification. These results indicate that patient-specific QA could be simplified.     

Review of impact categories and environmental indicators for life cycle assessment of geotechnical systems

Life cycle assessment (LCA) has only had limited application in the geotechnical engineering discipline, though it has been widely applied to civil engineering systems such as pavements and roadways. A review of previous geotechnical LCAs showed that most studies have tracked a small set of impact categories, such as energy and global warming potential. Accordingly, currently reported environmental indicators may not effectively or fully capture important environmental impacts and tradeoffs associated with geotechnical systems, including those associated with land and soil resources. This research reviewed previous studies, methods, and models for assessment of land use and soil‐related impacts to understand their applicability to geotechnical LCA. The results of this review show that critical gaps remain in current knowledge and practice. In particular, further development or refinement of environmental indicators, impact categories, and cause–effect pathways is needed as they pertain to geotechnical applications—specifically those related to soil quality, soil functions, and the ecosystem services soils provide. In addition, many existing methods emerge from research on land use and land use change related to other disciplines (e.g., agriculture). For applicability to geotechnical projects, the resolution of many of these methods and resulting indicators need to be downscaled from the landscape/macro scale to the project scale. In the near term, practitioners of geotechnical LCA should begin tracking changes to soil properties and report impacts to land and soil resources qualitatively.     

Lifting the veil on the correction of double counting incidents in hybrid life cycle assessment

Life cycle assessment (LCA) and environmentally extended input–output analyses (EEIOA) are two techniques commonly used to assess environmental impacts of an activity/product. Their strengths and weaknesses are complementary, and they are thus regularly combined to obtain hybrid LCAs. A number of approaches in hybrid LCA exist, which leads to different results. One of the differences is the method used to ensure that mixed LCA and EEIOA data do not overlap, which is referred to as correction for double counting. This aspect of hybrid LCA is often ignored in reports of hybrid assessments and no comprehensive study has been carried out on it. This article strives to list, compare, and analyze the different existing methods for the correction of double counting. We first harmonize the definitions of the existing correction methods and express them in a common notation, before introducing a streamlined variant. We then compare their respective assumptions and limitations. We discuss the loss of specific information regarding the studied activity/product and the loss of coherent financial representation caused by some of the correction methods. This analysis clarifies which techniques are most applicable to different tasks, from hybridizing individual LCA processes to integrating complete databases. We finally conclude by giving recommendations for future hybrid analyses.