An examination of two concentrate allocation strategies which are based on the early lactation milk yield of autumn calving Holstein Friesian cows

The objective of this experiment was to compare the effects of two concentrate feeding strategies offered with a grass silage and maize silage diet on the dry matter (DM) intake, milk production (MP) and estimated energy balance of autumn calved dairy cows. Over a 2-year period, 180 autumn calving Holstein Friesian cows were examined. Within year, cows were blocked into three MP sub-groups (n=9) (high (HMP), medium (MMP) and low (LMP)) based on the average MP data from weeks 3 and 4 of lactation. Within a block cows were randomly assigned to one of two treatments (n=54), flat rate (FR) concentrate feeding or feed to yield (FY) based on MP sub-group. Cows on the FR treatment were offered a fixed rate of concentrate (5.5 kg DM/cow per day) irrespective of MP sub-group. In the FY treatment HMP, MMP and LMP cows were allocated 7.3, 5.5 and 3.7 kg DM of concentrate, respectively. The mean concentrate offered to the FR and FY treatments was the same. On the FR treatment there was no significant difference in total dry matter intake (TDMI, 17.3 kg) between MP sub-groups. In the FY treatment, however, the TDMI of HMP-FY was 2.2 kg greater than MMP-FY, and 4.5 kg greater than LMP-FY (15.2 kg DM). The milk yield of LMP-FR was 3.5 kg less than the mean of the HMP-FR and MMP-FR treatments (24.5 kg). The milk yield of the HMP-FY treatment was 3.6 and 7.9 kg greater than the MMP-FY and LMP-FY treatments, respectively. The difference in MP between the HMP sub-groups was 2.6 kg, which translates to a response of 1.4 kg of milk per additional 1 kg of concentrate offered. There was no significant difference in MP between the two LMP sub-groups; however, MP increased 0.8 kg per additional 1 kg of concentrate offered between cows on the LMP-FR and LMP-FY treatments. The estimated energy balance was positive for cows on the LMP-FR treatment, but negative for cows on the other treatments. The experiment highlights the variation within a herd in MP response to concentrate, as cows with a lower MP potential are less responsive to additional energy input than cows with a greater MP potential. Cows with a greater MP capacity did not substitute additional concentrate for the basal forage, which indicates an additional demand for energy based on ability of individual cows to produce milk.     

Welfare of organic laying hens kept at different indoor stocking densities in a multi-tier aviary system. II: live weight,health measures and perching

Multi-tier aviary systems, where conveyor belts below the tiers remove the manure at regular intervals, are becoming more common in organic egg production. The area on the tiers can be included in the net area available to the hens (also referred to as usable area) when calculating maximum indoor stocking densities in organic systems within the EU. In this article, results on live weight, health measures and perching are reported for organic laying hens housed in a multi-tier system with permanent access to a veranda and kept at stocking densities (D) of 6, 9 and 12 hens/m² available floor area, with concomitant increases in the number of hens per trough, drinker, perch and nest space. In a fourth treatment, access to the top tier was blocked reducing vertical, trough, and perch access at the lowest stocking density (D6x). In all other aspects than stocking density, the experiment followed the EU regulations on the keeping of organic laying hens. Hen live weight, mortality and foot health were not affected by the stocking densities used in the present study. Other variables (plumage condition, presence of breast redness and blisters, pecked tail feathers, and perch use) were indirectly affected by the increase in stocking density through the simultaneous reduction in access to other resources, mainly perches and troughs. The welfare of the hens was mostly affected by these associated constraints, despite all of them being within the allowed minimum requirements for organic production in the EU. Although the welfare consequences reported here were assessed to be moderate to minor, it is important to take into account concurrent constraints on access to other resources when higher stocking densities are used in organic production.     

Evaluation of the Variation in Calculated Human Exposure to Soil Contaminants Using Seven Different European Models

Calculations using seven European exposure models were performed for 20 different exposure scenarios. The objective of this article is to understand the variation in the resulting calculated human exposures due to soil contamination. To this purpose, the variation in calculated exposures has been compared with the variation in calculated concentrations in contact media and in the soil compartments and with the variation in the input parameters. This led to the conclusion that most of the variation in Exposure through soil ingestion is explained by differences in the input parameter average daily soil intake. When model-specific input parameters are used the variation in Exposure through crop consumption is explained by differences in the product of total consumption rate and fraction of total consumption rate that is home-grown. When standardized input parameters are used, this variation is comparable with the variation in Concentration in root vegetables and in Concentration in leafy vegetables. The variation in Exposure through indoor air inhalation is comparable with the variation in Concentration in indoor air. This suggests that the parameters that control the variation in Concentration in the indoor air, that is, surface and volume of the building and, to a lesser extent, ventilation frequency of the building, also control the variation in Exposure through indoor air inhalation.     

The role of clothing fabrics as passive pollen collectors in the north‐eastern United States

The purpose of this investigation is to determine if clothing fabrics act as passive pollen collectors, and to determine if different fabrics vary with regard to the abundance and type of pollen trapped. Five of the most common fabrics in the United States (cotton, wool, polyester, silk and linen) were used to trap pollen. The pollen collecting apparatus was constructed of a 30?cm diameter circular needlepoint hoop, which vertically rotated freely, and was mounted on a dowel that was driven into the soil to chest height. Five pollen collectors, each with one of the five fabrics were placed at a collection site in rural, suburban, and urban habitats in Rhode Island for a 24?h period at weekly or biweekly intervals throughout 2002–2003. Pollen was washed from each of the fabrics and acetolysed. Total pollen per cm² removed from each of the fabric types was estimated using a haemocytometer. The pollen types were identified, and 200 grains were counted to determine the relative abundance of the various pollen types recovered from the fabrics. Clothing fabrics act as passive pollen collectors and the flora recovered from the fabric represent the qualitative and quantitative components of the pollen rain for that specific day. There are quantitative differences among the relative abundance of pollen types from the three habitats (urban, suburban, and rural). Washing with water and a detergent eliminates a majority of the pollen from the fabrics.     

Indoor Air Inhalation Risk Assessment for Volatiles Emanating from Light Nonaqueous Phase Liquids

The indoor air inhalation pathway for volatile contaminants in soil and groundwater has received much attention recently. The risk of exposure may be higher when volatile organic compounds (VOCs) reside as constituents of a free product plume below residential or commercial structures than when dissolved in groundwater or adsorbed on soil. A methodology was developed for assessing the potential for vapor phase migration—and associated risk of indoor air inhalation—of volatile constituents from a light nonaqueous phase liquid (LNAPL) plume on top of the water table. The potential risk from inhalation of VOCs in indoor air emanating from a subsurface Jet Fuel 4 (JP-4) plume by hypothetical residential receptors was assessed at a site. Chemicals of concern (COCs) were identified and evaluated using data from the composition of JP-4 mixtures and published chemical, physical, and toxicological data. The method estimates the equilibrium vapor concentrations of JP-4 constituents using Raoult's Law for partial vapor pressure of mixtures based on assumptions about the mixture composition of JP-4. The maximum allowable vapor concentration at the source (immediately above the LNAPL) corresponding to an indoor air target concentration based on acceptable risk levels are calculated using the Johnson and Ettinger model. The model calculates the attenuation factor caused by the migration of the vapor phase VOCs through the soil column above the JP-4 plume and through subsurface foundation slabs. Finally, the maximum allowable soil gas concentrations above the LNAPL for individual constituents were calculated using this methodology and compared to the calculated equilibrium vapor concentrations of each COC to assess the likelihood of potential risk from the indoor air inhalation pathway.     

Production of mycotoxins on artificially and naturally infested building materials

In this study, the ability to produce mycotoxins during growth on artificially infested building materials was investigated for Penicillium chrysogenum, Pen. polonicum, Pen. brevicompactum, Chaetomium spp., Aspergillus ustus, Asp. niger, Ulocladium spp., Alternaria spp., and Paecilomyces spp., all isolated from water-damaged building materials. Spores from the different isolates of the above mentioned species were inoculated on gypsum board with and without wallpaper and on chipboard with and without wallpaper. Fungal material was scraped off the materials, extracted, and analyzed using high performance liquid chromatography-diode array detection and thin layer chromatography. All six isolates of C. globosum produced the toxic chaetoglobosins A and C, at levels of up to 50 and 7 g/cm² respectively. The quantities of secondary metabolites produced by Penicillia were generally low, and no toxin production was detected from any of the five isolates of Pen. chrysogenum. Both isolates of Pen. polonicum produced 3-methoxy-viridicatin, verrucosidin, and verrucofortine. Two of five isolates of Pen. brevicompactum produced mycophenolic acid. From five out of six isolates of Alternaria spp., alternariol and alternariol monomethyl ether were detected. From Ulocladium spp., Paecilomyces spp., and Asp. ustus no known mycotoxins were detected, although the latter two are known mycotoxin producers. Asp. niger produced several naphtho--pyrones and tetra-cyclic compounds. All investigated species, especially Asp. ustus and Asp. niger produced many unknown secondary metabolites on the building materials. Analyses of wallpaper and glass-fibre wallpaper naturally infested with Asp. versicolor revealed sterigmatocystin and 5-methoxysterigmatocystin. Analyses of naturally infested wallpaper showed that C. globosum produced the chaetoglobosins A and C, and Pen. chrysogenum produced the antibiotic meleagrin.This revised version was published online in October 2005 with corrections to the Cover Date.     

Preliminary surveys of outdoor and indoor aeromycobiota in Uganda

This investigation was conducted during the period of March through June 1998 to trap, enumerate and identify the different airborne fungi in a variety of microhabitats of outdoor and indoor environments in different localities of Uganda. The settle plate method was used and Czapek-Dox agar was the isolation medium. A total of 47 genera and 61 species in addition to some other unidentified airborne fungi were trapped from all exposures at outdoor (39 genera and 52 species) and indoor (35 and 49) environments. The total fungal catches of outdoor airspora obtained from all exposures (and even in most individual exposures) were more than twice (5222 colonies) of that of the indoor ones (4361) when the exposure periods are taken into consideration. It is worth mentioning that the most highly polluted sites were either parks, forests or river banks for outdoor exposures, or teaching laboratory, library, laterines or bathrooms for indoor exposures. The most prevalent fungi from both outdoor and indoor microhabitats being species of Mycosphaerella, Yeasts, Penicillium, Fusarium, Aspergillus,Cochliobolus and Alternaria. However, several others were trapped frequently from either outdoor or indoor environments. On the other hand, several others were trapped only, but not frequently (in low or rare instances) from either outdoor or indoor microhabitats. The implications of these airborne spores are also discussed. This revised version was published online in June 2006 with corrections to the Cover Date.     

Anopheles arabiensis and An. quadriannulatus resistance to DDT in South Africa

The malaria control programme of KwaZulu‐Natal Province, South Africa, includes Mamfene and Mlambo communities. Western‐type houses there are currently sprayed with deltamethrin, whereas traditional houses are sprayed with DDT for malaria control. In 2002, mosquitoes of the Anopheles gambiae complex (Diptera: Culicidae) were collected from DDT‐sprayed houses, by window exit traps, and from man‐baited nets outdoors. Larval collections were also carried out at Mzinweni Pan near Mlambo. Species of the An. gambiae complex were identified by rDNA polymerase chain reaction assay. The majority of samples collected by window trap and baited nets were identified as the malaria vector An. arabiensis Patton, with a few An. merus Dönitz and An. quadriannulatus (Theobald). The larval collections were predominantly An. quadriannulatus with a small number of An. arabiensis. Standard WHO insecticide susceptibility tests using 4% DDT and 0.05% deltamethrin were performed on both wild‐caught females and laboratory‐reared progeny from wild‐caught females. Wild‐caught An. arabiensis samples from window traps gave 63% and 100% mortality 24‐h post‐exposure to DDT or deltamethrin, respectively. Wild‐caught An. arabiensis samples from man‐baited net traps gave 81% mortality 24‐h post‐exposure to DDT. The F₁ progeny from 22 An. arabiensis females showed average mortality of 86.5% 24‐h post‐exposure to DDT. Less than 80% mortality was recorded from five of these families. Biochemical analyses of samples from each of the families revealed comparatively high levels of glutathione‐S‐transferases and non‐specific esterases in some families, but without significant correlation to bioassay results. Wild‐caught An. quadriannulatus larvae were reared through to adults and assayed on 4% DDT, giving 47% (n = 36) mortality 24‐h post‐exposure. Finding DDT resistance in the vector An. arabiensis, close to the area where we previously reported pyrethroid‐resistance in the vector An. funestus Giles, indicates an urgent need to develop a strategy of insecticide resistance management for the malaria control programmes of southern Africa.     

Life cycle assessment of recirculating aquaculture systems: A case of Atlantic salmon farming in China

Recirculating aquaculture systems (RAS) are an alternative technology to tackle the major environmental challenges associated with conventional cage culture systems. In order to systematically assess the environmental performance of RAS farming, it is important to take the whole life cycle into account so as to avoid ad hoc and suboptimal environmental measures. So far, the application of life cycle assessment (LCA) in aquaculture, especially to indoor RAS, is still in progress. This study reports on an LCA of Atlantic salmon harvested at an indoor RAS farm in northern China. Results showed that 1 tonne live‐weight salmon production required 7,509 kWh farm‐level electricity and generated 16.7 tonnes of CO₂ equivalent (eq), 106 kg of SO₂ eq, 2.4 kg of P eq, and 108 kg of N eq (cradle‐to‐farm gate). In particular, farm‐level electricity use and feed product were identified as primary contributors to eight of nine impact categories assessed (54–95% in total), except the potential marine eutrophication (MEU) impact (dominated by the grow‐out effluents). Among feed ingredients (on a dry‐weight basis), chicken meal (5%) and krill meal (8%) dominated six and three, respectively, of the nine impact categories. Suggested environmental improvement measures for this indoor RAS farm included optimization of stocking density, feeding management, grow‐out effluent treatment, substitution of feed ingredients, and selection of electricity generation sources. In a generic context, this study can contribute to a better understanding of the life cycle environmental impacts of land‐based salmon RAS operations, as well as science‐based communication among stakeholders on more eco‐friendly farmed salmon.