Minimizing prion risk without compromising the microbial composition of biofilms grown in vivo in a human plaque model

AIMS: To determine whether the stringency of sterilization procedures for biological components of in vivo dental plaque-generating devices based on enamel can be increased to minimize prion risk without compromising natural biofilm composition. METHODS AND RESULTS: The composition of in vitro biofilms, grown on hypochlorite-treated and untreated autoclaved enamel surfaces, was determined using culture-based methods and checkerboard DNA: DNA hybridization analysis. No differences were found between biofilms recovered from either substrate. SIGNIFICANCE: Several in situ models allow generation of plaque in the oral cavity, followed by recovery of intact biofilms for experimentation. Approaches allowing plaque formation on natural tooth surfaces are most valuable, but present a possible infection risk to volunteers wearing plaque-collecting devices, particularly with respect to prions. Hypochlorite treatment of biological material, as an adjunct to autoclaving, reduces infection risk without compromising biofilm composition and should be adopted in all future studies using plaque-generating devices incorporating enamel, where there is a potential prion threat, and further investigated in other biological hard tissues.     

次氯酸钠真空处理绿豆消毒效果评价及机理研究

本研究讨论了绿豆中微生物的分布规律及相关联的结构特征,次氯酸钠常规及真空处理绿豆全豆、表皮及内部消毒效果的评价及机理分析.结果证明,绿豆全豆、表皮及内部的菌落总数分别为8.41×105cfu/g、6.70×103 cfu/g及8.30×105cfu/g,经有效氯浓度为(3 000～33 000)mg/kg的次氯酸钠溶液,1h常规浸种处理后绿豆全豆、表皮及内部菌落总数分别下降(0.93～2.22) log cfu/g、(0.92 ～ 2.20) log cfu/g及(0.94 ～ 2.09) log cfu/g.真空度0.05 MPa下,经有效氯浓度(3 000 ～ 33 000) mg/kg的次氯酸钠溶液1h浸泡后,绿豆全豆、表皮及内部菌落总数分别下降(1.67 ～ 4.15) log cfu/g、(1.15 ～2.38)1og cfu/g及(1.62～4.11) log cfu/g.经分析,真空处理能使次氯酸钠克服绿豆表皮蜡质层及内部空腔结构的影响,有效接触微生物从而提高消毒效果.     

Mechanisms of inhibition of chemiluminescence in the oxidation of luminol by sodium hypochlorite

Two different mechanisms of inhibition of chemiluminescence in the oxidation of luminol by sodium hypochlorite were found. Most substances investigated in these experiments acted by scavenging NaOCI. This mechanism was independent of the concentration of hydrogen peroxide and the incubation time between luminol and inhibitors. The most potent inhibitors were substances containing SH groups. Compounds with amino groups as a target for HOCI/OCI^? to yield chloramines were much less effective inhibitors. Another mechanism of inhibition was found for catalase. It depended on the presence of hydrogen peroxide in the incubation medium and the incubation time between luminol and catalase. The enzyme inhibited the luminescence by removing H₂O₂ at molar concentrations much smaller than those found for all other inhibitors. Our results confirm the present models of the mechanism of generation of luminescence in luminol oxidation.     

A synthetic furanone potentiates the effect of disinfectants on Salmonella in biofilm

Aims: To study a possible effect of a synthetic brominated furanone on biofilm formation and biofilm resistance to disinfectants in Salmonella enterica. Methods and Results: The effect of a synthetic furanone on biofilm formation of Salm. enterica serovar Agona and Salm. enterica serovar Typhimurium (11 strains of different origins) was evaluated in a microtiterplate assay. A significant reduction in biofilm build‐up in microtiterplates by the furanone was observed for seven of the strains tested. Biofilms by two Salm. Agona feed factory strains and the effects on survival after exposures to disinfectants (hypochlorite and benzalkonium chloride) were assessed for both strains. Pretreatment with furanone significantly potentiated the effect of the two disinfectants for both strains. Conclusions: The effect of disinfectants on Salmonella in biofilm was significantly enhanced when the biofilm was grown in the presence of furanone. This was probably because of an effect on biofilm architecture, composition and in some cases also biofilm build‐up. Significance and Impact of the Study: The present study gives valuable new knowledge in the fight against Salmonella biofilm in the environment because of the potentiated effect of conventional disinfectants.     

Mechanism of the action of biogenic chloramines and hypochlorite on the initial aggregation of platelets

The antiaggregant effect of two reactive oxidants—N,N-dichlorotaurine (a biogenic chloramine) and sodium hypochlorite—on the initial ADP-induced aggregation of rabbit blood platelets was studied. Platelet aggregation in reconstituted platelet-rich plasma was measured nephelometrically; an increase in the intensity of small-angle light scattering served as an index of aggregation. Addition of chloramine at relatively small concentrations (no greater than 1 mM available chlorine) directly to the reconstituted platelet-rich plasma suppressed the initial aggregation (formation of small aggregates) several times more strongly than preincubation of native plasma with chloramine. This suggests that N,N-dichlorotaurine realizes its antiaggregant effect on the platelet-rich plasma by directly interacting with cells. The effects of the inhibition of platelet aggregation in two variants of addition of high concentrations of N,N-dichlorotaurine did not differ significantly. In this case, a large amount of residual unreacted chloramine remained in the plasma, which caused the suppression of platelet aggregation during subsequent reconstitution of the platelet-rich plasma. Similar data were obtained in studying the antiaggregant effect of hypochlorite. N,N-Dichlorotaurine and hypochlorite at concentrations of 0.2–0.3 and 0.15 mM, respectively, strongly inhibited the initial aggregation of isolated platelets (approximately 2·10⁸ cells/ml) preliminarily activated for 1.5 min by addition of 0.1–0.5 μM ADP. However, the antiaggregants had a more profound suppressive effect on the aggregation of unstimulated platelets. The antiaggregant effects of N,N-dichlorotaurine and hypochlorite probably stem from the oxidative modification of the sulfur-containing groups in platelet plasma membrane.     

Luminol-enhanced chemiluminescence of rabbit polymorphonuclear leukocytes: The nature of oxidants that directly cause luminol oxidation

In this study, we investigated the pathways (including the formation of hydroxyl radicals and chloramines) leading to luminol chemiluminescence induced by hypochlorite generated in a suspension of stimulated rabbit polymorphonuclear leukocytes. Chemiluminescence of leukocytes stimulated by phorbol myristate acetate, which was enhanced by luminol (0.02 mM), did not change in the presence of dimethyl sulfoxide at moderate concentrations (0.02–2.6 mM), under which the latter should manifest the specific ability to scavenge hydroxyl radicals. This indicates that stimulation of polymorphonuclear leukocytes is not accompanied by the generation of hydroxyl radicals with the involvement of superoxide anion and hypochlorite synthesized by myeloperoxidase. At high concentrations of dimethyl sulfoxide (260 mM), chemiluminescence markedly declined because dimethyl sulfoxide directly reacts with hypochlorite. The luminol emission intensity considerably increased after its addition to a suspension of leukocytes that were preliminarily stimulated for 10 min. This effect was caused by the accumulation of hydrogen peroxide rather than chloramines. Exogenous amino acids and taurine at high concentrations (3–15 mM) quench chemiluminescence. All these data indicate that chemiluminescence in the system studied is largely determined by the direct initial reaction of hypochlorite with luminol, the emission intensity increasing as a result of oxidation of luminol transformation products by hydrogen peroxide.     

Effect of the physical properties of acrylic resin of overnight immersion in sodium hypochlorite solution

doi:10.1111/j.1741‐2358.2009.00336.x
Effect of the physical properties of acrylic resin of overnight immersion in sodium hypochlorite solution Objectives: This study evaluated colour stability, surface roughness and flexural strength of microwave‐polymerised acrylic resin after overnight immersion in sodium hypochlorite, simulating 180 days use. Materials and methods: Forty disc‐shaped (15 mm × 4 mm) and 40 rectangular specimens (65 mm × 10 mm × 3 mm) were prepared from microwave‐polymerised acrylic resin. The specimens were immersed in 0.5, 1% sodium hypochlorite, Clorox/Calgon and distilled water. Colour measurements (ΔE) were determined by a portable colorimeter. A surface analyser was used to measure roughness (μm). The flexural strength (MPa) was measured using a three‐point bending test in a universal testing machine. Data were evaluated by one‐way anova , followed by Student–Newman–Keuls test (α = 0.05). Results: Statistical analysis found significantly higher colour changes (SNK, p < 0.001) for the 1% sodium hypochlorite, but mean ΔE value quantified by National Bureau of Standards was classified as slight. When comparing the surface roughness, no statistical significance was found among the solutions (anova , p = 0.637). The 1% sodium hypochlorite presented significantly lower flexural strength compared with the control group (SNK, p = 0.034). Conclusion: It was concluded that immersion in 1% sodium hypochlorite solutions for 8 h does influence the colour stability and flexural strength of microwave‐polymerised acrylic resin, during the simulated period of 180 days.     

A critical evaluation of a flow‐cell based on a liquid core waveguide for chemiluminescence measurements

Liquid‐core waveguides (LCWs), devices that constrain the emitted radiation minimizing losses during the transport, are an alternative to maximize the amount of detected radiation in luminescence. In this work, the performance of a LCW flow‐cell was critically evaluated for chemiluminescence measurements, by using as model the oxidation of luminol by hydrogen peroxide or hypochlorite. An analytical procedure for hypochlorite determination was also developed, with linear response in the range 0.2–3.8 mg/L (2.7–51 µmol/L), a detection limit estimated as 8 µg/L (0.64 µmol/L) at the 99.7% confidence level and luminol consumption of 50 µg/determination. The coefficients of variation were 3.3% and 1.6% for 0.4 and 1.9 mg/L ClO^?, respectively, with a sampling rate of 164 determinations/h. The procedure was applied to the analysis of Dakin's solution samples, yielding results in agreement with those obtained by iodometric titration at the 95% confidence level. Copyright © 2008 John Wiley & Sons, Ltd.     

Validation of an extracted tooth model of endodontic irrigation

An extracted tooth model of endodontic irrigation, incorporating reproducible inoculation and irrigation procedures, was tested against Enterococcus faecalis using a variety of different irrigants in a Latin square methodology. ANOVA revealed no significant variations between the twelve teeth or experiments undertaken on different occasions; however, variation between irrigants was significant.