Comparative post-hatching ontogeny of Pseudoplatystoma reticulatum (Eigenmann & Eigenmann 1889) and Leiarius marmoratus (Gill, 1870) and their hybrid

Ontogenetic studies of the eggs and larvae of fish can provide information on the initial life history and biology of a species, are important for taxonomic and evolutionary studies, and for cultivation in captivity. The aim of this study was to analyze and describe the main morphological differences in the larval ontogeny of Pseudoplatystoma reticulatum, Leiarius marmoratus, and its hybrid (♀ P. reticulatum × ♂ L. marmoratus), as well as to identify characteristics that can identify the species and their hybrid at the larvae and juvenile stages. 205 L. marmoratus, 210 P. reticulatum, and 205 hybrid specimens were analyzed, all of which were obtained through induced reproduction. Analyses were performed from hatching to 30 days post-hatching. 19 morphometric and 5 meristic characteristics were evaluated, in addition to chromatophore shape and distribution. The specimens were classified into two life periods: Larval (stages: yolk sac, pre-flexion, flexion, and post-flexion) and Juvenile. Newly hatched larvae were transparent, poorly developed, and had a scarcity of chromatophores. During the early stages of larval development, the three groups showed similarities in appearance and proportional dimensions. However, at both the end of the post-flexion stage and at the juvenile period when individuals were approximately 2 cm long, it was possible to differentiate between hybrids and their parental species by their morphometric, meristic, and pigment characteristics. The hybrid, despite occupying an intermediate position in relationship to its parents, exhibited a shape and size more similar to P. reticulatum, its maternal parent.     

Hybridization and speciation

Hybridization has many and varied impacts on the process of speciation. Hybridization may slow or reverse differentiation by allowing gene flow and recombination. It may accelerate speciation via adaptive introgression or cause near‐instantaneous speciation by allopolyploidization. It may have multiple effects at different stages and in different spatial contexts within a single speciation event. We offer a perspective on the context and evolutionary significance of hybridization during speciation, highlighting issues of current interest and debate. In secondary contact zones, it is uncertain if barriers to gene flow will be strengthened or broken down due to recombination and gene flow. Theory and empirical evidence suggest the latter is more likely, except within and around strongly selected genomic regions. Hybridization may contribute to speciation through the formation of new hybrid taxa, whereas introgression of a few loci may promote adaptive divergence and so facilitate speciation. Gene regulatory networks, epigenetic effects and the evolution of selfish genetic material in the genome suggest that the Dobzhansky–Muller model of hybrid incompatibilities requires a broader interpretation. Finally, although the incidence of reinforcement remains uncertain, this and other interactions in areas of sympatry may have knock‐on effects on speciation both within and outside regions of hybridization.     

Introgressive hybridization of Senecio hercynicus and S. ovatus (Compositae,Senecioneae) along an altitudinal gradient in Harz National Park (Germany)

Introgressive hybridization of Senecio hercynicus and S. ovatus (Compositae, Senecioneae) was studied in a hybrid zone on the southern slopes of Mt Brocken (Harz Mountains, Germany). A total of 415 plants representing 10 stands along an altitudinal gradient were investigated using multivariate statistical analyses of morphological characters and molecular markers (random amplified polymorphic DNA[RAPD]). Both types of traits detected pure S. hercynicus stands on the summit plateau, pure S. ovatus stands at the lowest elevations, and hybrid swarms at intermediate elevations. While morphological and molecular patterns coincided, some individuals in hybrid stands combined morphological patterns typical of S. ovatus with RAPD patterns typical of S. hercynicus, and vice versa. In general, introgression was symmetrical within stands, though one stand combined S. ovatus characters with the glandular hair typical for S. hercynicus, and two stands combined a S. hercynicus typical RAPD genotype with morphological characters shifted towards S. ovatus. Because pure stands of S. hercynicus occurred only on the summit plateau of Mt Brocken, and markers typical for S. ovatus were detectable in stands up to 1040 m a.s.l., future fusion or assimilation of the rare form, S. hercynicus, by the more widespread S. ovatus appears possible at Mt Brocken.     

Synthesis and Evaluation of Pyrrole Polyamide- 2′-Deoxyguanosine 5′-Phosphate Hybrid

Pyrrole polyamide-2′-deoxyguanosine 5′-phosphate hybrid (Hybrid 4) was synthesized and evaluated in terms of the inhibition of mouse mammary carcinoma FM3A cell growth. Hybrid 4 was found to exhibit dose-dependent inhibition of cell growth.     

A Novel High‐Energy Hybrid Supercapacitor with an Anatase TiO2–Reduced Graphene Oxide Anode and an Activated Carbon Cathode

A hybrid supercapacitor with high energy and power densities is reported. It comprises a composite anode of anatase TiO₂ and reduced graphene oxide and an activated carbon cathode in a non‐aqueous electrolyte. While intercalation compounds can provide high energy typically at the expense of power, the anatase TiO₂ nanoparticles are able to sustain both high energy and power in the hybrid supercapacitor. At a voltage range from 1.0 to 3.0 V, 42 W h kg^?1 of energy is achieved at 800 W kg^?1. Even at a 4‐s charge/discharge rate, an energy density as high as 8.9 W h kg^?1 can be retained. The high energy and power of this hybrid supercapacitor bridges the gap between conventional batteries with high energy and low power and supercapacitors with high power and low energy.     

Quantum Dot Based Heterostructures for Unassisted Photoelectrochemical Hydrogen Generation

TiO₂ hollow nanowires (HNWs) and nanoparticles (NPs) constitute promising architectures for QDs sensitized photoanodes for H₂ generation. We sensitize these structures with CdS/CdSe quantum dots by two different methods (chemical bath deposition, CBD and succesive ionic layer adsorption and reaction, SILAR) and evaluate the performance of these photoelectrodes. Remarkable photocurrents of 4 mA·cm and 8 mA·cm^?2 and hydrogen generation rates of 40 ml·cm^?2·day^?1 and 80 ml·cm^?2·day^?1 have been obtained in a three electrode configuration with sacrificial hole scavengers (Na₂S and Na₂SO₃), for HNWs and NPs respectively, which is confirmed through gas analysis. More importantly, autonomous generation of H₂ (20 ml·cm^?2·day^?1 corresponding to 2 mA·cm^?2 photocurrent) is obtained in a two electrode configuration at short circuit under 100 mW·cm^?2 illumination, clearly showing that these photoanodes can produce hydrogen without the assistance of any external bias. To the best of the authors' knowledge, this is the highest unbiased solar H₂ generation rate reported for these of QDs based heterostructures. Impedance spectroscopy measurements show similar electron density of trap states below the TiO₂ conduction band while the recombination resistance was higher for HNWs, consistently with the much lower surface area compared to NPs. However, the conductivity of both structures is similar, in spite of the one dimensional character of HNWs, which leaves some room for improvement of these nanowired structures. The effect of the QDs deposition method is also evaluated. Both structures show remarkable stability without any appreciable photocurrent loss after 0.5 hour of operation. The findings of this study constitute a relevant step towards the feasibility of hydrogen generation with wide bandgap semiconductors/quantum dots based heterostructures.     

Sandwich‐Type Microporous Carbon Nanosheets for Enhanced Supercapacitor Performance

Sandwich‐type microporous hybrid carbon nanosheets (MHCN) consisting of graphene and microporous carbon layers are fabricated using graphene oxides as shape‐directing agent and the in‐situ formed poly(benzoxazine‐co‐resol) as carbon precursor. The reaction and condensation can be readily completed within 45 min. The obtained MHCN has a high density of accessible micropores that reside in the porous carbon with controlled thickness (e.g., 17 nm), a high surface area of 1293 m² g^?1 and a narrow pore size distribution of ca. 0.8 nm. These features allow an easy access, a rapid diffusion and a high loading of charged ions, which outperform the diffusion rate in bulk carbon and are highly efficient for an increased double‐layer capacitance. Meanwhile, the uniform graphene percolating in the interconnected MHCN forms the bulk conductive networks and their electrical conductivity can be up to 120 S m^?1 at the graphene percolation threshold of 2.0 wt.%. The best‐practice two‐electrode test demonstrates that the MHCN show a gravimetric capacitance of high up to 103 F g^?1 and a good energy density of ca. 22.4 Wh kg^?1 at a high current density of 5 A g^?1. These advanced properties ensure the MHCN a great promise as an electrode material for supercapacitors.     

Combining model structure identification and hybrid modelling for photo-production process predictive simulation and optimisation

Integrating physical knowledge and machine learning is a critical aspect of developing industrially focused digital twins for monitoring, optimisation, and design of microalgal and cyanobacterial photo-production processes. However, identifying the correct model structure to quantify the complex biological mechanism poses a severe challenge for the construction of kinetic models, while the lack of data due to the time-consuming experiments greatly impedes applications of most data-driven models. This study proposes the use of an innovative hybrid modelling approach that consists of a simple kinetic model to govern the overall process dynamic trajectory and a data-driven model to estimate mismatch between the kinetic equations and the real process. An advanced automatic model structure identification strategy is adopted to simultaneously identify the most physically probable kinetic model structure and minimum number of data-driven model parameters that can accurately represent multiple data sets over a broad spectrum of process operating conditions. Through this hybrid modelling and automatic structure identification framework, a highly accurate mathematical model was constructed to simulate and optimise an algal lutein production process. Performance of this hybrid model for long-term predictive modelling, optimisation, and online self-calibration is demonstrated and thoroughly discussed, indicating its significant potential for future industrial application.     

The geometry and genetics of hybridization

When divergent populations form hybrids, hybrid fitness can vary with genome composition, current environmental conditions, and the divergence history of the populations. We develop analytical predictions for hybrid fitness, which incorporate all three factors. The predictions are based on Fisher's geometric model, and apply to a wide range of population genetic parameter regimes and divergence conditions, including allopatry and parapatry, local adaptation, and drift. Results show that hybrid fitness can be decomposed into intrinsic effects of admixture and heterozygosity, and extrinsic effects of the (local) adaptedness of the parental lines. Effect sizes are determined by a handful of geometric distances, which have a simple biological interpretation. These distances also reflect the mode and amount of divergence, such that there is convergence toward a characteristic pattern of intrinsic isolation. We next connect our results to the quantitative genetics of line crosses in variable or patchy environments. This means that the geometrical distances can be estimated from cross data, and provides a simple interpretation of the “composite effects.” Finally, we develop extensions to the model, involving selectively induced disequilibria, and variable phenotypic dominance. The geometry of fitness landscapes provides a unifying framework for understanding speciation, and wider patterns of hybrid fitness.