Response to different sources of vitamin E orally injected and to various doses of vitamin E in calf starter on the plasma vitamin E level in calves around weaning

Calves often face a lower plasma vitamin E level than the recommended level (3 µg/ml for adult cows) after weaning, a level which has been related to a good immune response. Two experiments were performed to determine the most effective source and level of vitamin E to be included in a calf starter to maintain the plasma vitamin E level above the recommended level after weaning. Experiment 1 (Exp 1) and experiment 2 (Exp 2) included a total of 32 and 40 calves, respectively, from 2 weeks before weaning until 2 weeks after weaning. In Exp 1, calves were orally injected a daily dose of different vitamin E sources including, no α-tocopherol (0 dose; Control), 200 mg/d of RRR-α-tocopherol (ALC), 200 mg/d of RRR-α-tocopheryl acetate (ACT), or 200 mg/d of all-rac-α-tocopheryl acetate (SYN). In Exp 2, a dose response study was carried out with 0, 60, 120, and 200 mg/kg of ALC in a pelleted calf starter. Final BW (100 ± 16 and 86 ± 11 kg) and average daily gain (956 ± 303 and 839 ± 176 g/d in Exp 1 and 2, respectively; mean ± SD) were unaffected by either source or level of α-tocopherol. In Exp 1, the plasma RRR-α-tocopherol level was affected by α-tocopherol source (P < 0.001), week (P < 0.001), and interaction between them (P < 0.001). At weaning time, the plasma RRR-α-tocopherol was 2.7, 2.1, 1.1, and 0.8 μg/ml in ALC, ACT, SYN, and Control, respectively. In Exp 2, the plasma α-tocopherol level was affected by ALC dose (P = 0.04), week (P < 0.001), and a tendency for an interaction between them was observed (P = 0.06). At weaning, a 36, 31, and 28% reduction in plasma α-tocopherol level was observed compared to the beginning of the experiment with 0, 60, and 120 mg/kg of ALC, respectively; however, with 200 mg/kg of ALC, a 9% increase in the plasma α-tocopherol level was observed. In addition, 200 mg/kg of ALC was able to maintain plasma α-tocopherol after weaning higher than the recommended level. The results showed that the ALC was the most efficient source of α-tocopherol supplementation to be used in a calf starter. In addition, the 200 mg/kg of ALC in the calf starter was the only effective dose to maintain the postweaning plasma vitamin E concentration at the recommended level after weaning and α-tocopherol similar to that observed before weaning.     

Thermally Durable Lithium‐Ion Capacitors with High Energy Density from All Hydroxyapatite Nanowire‐Enabled Fire‐Resistant Electrodes and Separators

The reliability and durability of lithium‐ion capacitors (LICs) are severely hindered by the kinetic imbalance between capacitive and Faradaic electrodes. Efficient charge storage in LICs is still a huge challenge, particularly for thick electrodes with high mass loading, fast charge delivery, and harsh working conditions. Here, a unique thermally durable, stable LIC with high energy density from all‐inorganic hydroxyapatite nanowire (HAP NW)‐enabled electrodes and separators is reported. Namely, the LIC device is designed and constructed with the electron/ion dual highly conductive and fire‐resistant composite Li₄Ti₅O₁₂‐based anode and activated carbon‐based cathode, together with a thermal‐tolerant HAP NW separator. Despite the thick‐electrode configuration, the as‐fabricated all HAP NW‐enabled LIC exhibits much enhanced electrochemical kinetics and performance, especially at high current rates and temperatures. Long cycling lifetime and state‐of‐the‐art areal energy density (1.58 mWh cm^?2) at a high mass loading of 30 mg cm^?2 are achieved. Benefiting from the excellent fire resistance of HAP NWs, such an unusual LIC exhibits high thermal durability and can work over a wide range of temperatures from room temperature to 150 °C. Taking full advantage of synergistic configuration design, this work sets the stage for designing advanced LICs beyond the research of active materials.     

Development and validation of an experimental and theoretical method for the chiral discrimination of dinotefuran

Dinotefuran is a low-cost agrochemical considered a highly toxic product. In this sense, there is a need for its constant environmental, biological, and food control, aiming to ensure its use to humans as well as to preserve biodiversity and ecosystems. In the present work, we developed an experimental and theoretical method for dinotefuran chiral discrimination. According to the main results, the dinotefuran enantioselective separation was efficiently optimized by high-performance liquid chromatography evaluating the influence of different percentage compositions in the mobile phase to improve the resolution of the peaks in the chromatogram. The novelty of this work was the proposition of a reduced molecular model for the chiral selector amylose-Tris-(3,5-dimethylphenylcarbamate) polysaccharide that was able to adequately describe at the molecular level its interaction with the dinotefuran enantiomers. Besides, the thermodynamic and structural parameters obtained via density functional theory calculations pointed out the chiral discrimination as well as the enantiomeric elution order of the analyte studied, confirming the experimental data, thus validating our proposed method. Finally, hydrogen bonds and repulsive interactions played a key role in the discrimination between the diastereomeric complexes, and consequently, for the dinotefuran enantioselective separation.     

Functional LCAT deficiency in human apolipoprotein A-I transgenic, SR-BI knockout mice

Reduction of plasma LCAT activity has been observed in several conditions in which the size of HDL particles is increased; however, the mechanism of this reduction remains elusive. We investigated the plasma activity, mass, and in vivo catabolism of LCAT and its association with HDL particles in human apolipoprotein A-I transgenic, scavenger receptor class B type I knockout (hA-ITg SR-BI-/-) mice. Compared with hA-ITg mice, hA-ITg SR-BI-/- mice had a 4-fold higher total plasma cholesterol concentration, which occurred predominantly in 13-18 nm diameter HDL particles, a significant reduction in plasma esterified cholesterol-total cholesterol (EC/TC) ratio, and significantly lower plasma LCAT activity, suggesting a decrease in LCAT protein. However, LCAT protein in plasma, hepatic mRNA for LCAT, and in vivo turnover of 35S-radiolabeled LCAT were similar in both genotypes of mice. HDL from hA-ITg SR-BI-/- mice was enriched in sphingomyelin (SM), relative to phosphatidylcholine, and had less associated [35S]LCAT radiolabel and endogenous LCAT activity compared with HDL from hA-ITg mice. We conclude that the decreased EC/TC ratio in the plasma of hA-ITg SR-BI-/- mice is attributed to a reduction in LCAT reactivity with SM-enriched HDL particles.     

Differences in metabolite profile between blood plasma and serum

In metabolomic research, blood plasma and serum have been considered to possess similar compositions and properties. Their perceived equivalence has resulted in researchers choosing arbitrarily between serum and plasma for analysis. Here, routine serum and plasma were prepared and their low-molecular-weight compounds were determined using gas chromatography/time-of-flight mass spectrometry. Principal components analysis was applied to process the acquired data, and marked differences in metabolite profiles were observed between serum and plasma. Of the 72 identified compounds, 36 (50%) discriminate serum from plasma, with 29 and 7 metabolites showing a significantly higher abundance (t test, P < 0.05) in serum and plasma, respectively. Incubation of blood had distinct effects on the analyte peak areas, with the effects being more pronounced for plasma than for serum and more pronounced for a shorter incubation than for a longer incubation. These results highlight the importance in choosing serum or plasma as the analytical sample and in stipulating the incubation time. Because incubation affected the analyte peak areas less in serum than in plasma, we recommend serum as the sample of choice in metabolomic studies.     

Enhanced AFLP genome scans detect local adaptation in high-altitude populations of a small rodent (Microtus arvalis)

Adaptation to adverse environmental conditions such as high altitude requires physiological and/or morphological changes. Genome scans provide a means to identify the genetic basis of such adaptations without previous knowledge about the particular genetic variants or traits under selection. In this study, we scanned 3027 amplified fragment length polymorphisms (AFLP) in four populations of the common vole Microtus arvalis for loci associated with local adaptation and high altitude. We investigated voles from two populations at high elevation (~2000 m a.s.l.) representing the upper limit of the altitudinal distribution of the species and two geographically close low-altitude populations (<600 m a.s.l.). Statistical analysis incorporated a new Bayesian F(ST) outlier approach specifically developed for AFLP markers, which considers the intensity of AFLP bands instead of mere presence/absence and allows to derive population-based estimates of allele frequencies and F(IS) values. Computer simulations showed that this approach increases the statistical power of the detection of AFLP markers under selection almost to the power of single nucleotide polymorphism (SNP) data without compromising specificity. Our enhanced genome scan resulted in 20 prime candidate markers for positive selection, which show mostly extremely high allele frequency differences between the low- and high-altitude populations. The comparison of global- and pairwise-enhanced genome scans demonstrated further that very strong selective signatures may also be associated with single populations suggesting the importance of local adaptation in alpine populations of common voles.     

A simple cellulose column procedure for selective enrichment of glycopeptides and characterization by nano LC coupled with electron-transfer and high-energy collisional-dissociation tandem mass spectrometry

In this report we describe an on-column method for glycopeptide enrichment with cellulose as a solid-phase extraction material. The method was developed using tryptic digests of several standard glycoproteins and validated with more complex standard protein digest mixtures. Glycopeptides of different masses containing neutral and acidic glycoforms of both N- and O-linked sugars were obtained in good yield by this method. Upon isolation, glycopeptides may be subjected to further glycoproteomic and glycomic workflows for the purpose of identifying glycoproteins present in the sample and characterizing their glycosylation sites, as well as their global and site-specific glycosylation profiles at the glycopeptide level. Detailed structural analysis of glycoforms may then be performed at the glycan level upon chemical or enzymatic release of the oligosaccharides. Aiming at complementing other purification methods, this technique is extremely simple, cost-effective, and efficient. Glycopeptide enrichment was verified and validated by nano liquid chromatography-tandem mass spectrometry (LC-MS/MS) combining electron-transfer dissociation (ETD) and collision-activated dissociation (CAD) fragmentation techniques.     

Response of photosynthetic apparatus to moderate high temperature in contrasting wheat cultivars at different oxygen concentrations

The photosynthetic responses to moderately high temperatures (38 degrees C, imposed at 21% or 2% O(2) in air and 1500 mumol m(-2) s(-1)) were compared in wheat (Triticum aestivum L.) cultivars grown in northern regions of Ukraine and expected to be relatively sensitive to high temperatures ('North' cultivars) and in cultivars grown in southern regions and expected to be relatively heat-tolerant ('South' cultivars). Heating intact leaves in 21% O(2) for 1 h decreased CO(2) assimilation by c. 63% in 'North' cultivars and only c. 32% in 'South' cultivars, with a decrease in PSII activity being observed in only one of the 'North' cultivars. Carboxylation efficiency was decreased by about 2.7-fold in 'North' cultivars with no significant effect in 'South' cultivars. The maximum rates of carboxylation by Rubisco in vivo, V(cmax), estimated from Farquhar's model, increased more than 2-fold in 'South' cultivars and remained unchanged in 'North' cultivars while the maximum rate of RuBP regeneration, J(max), decreased by 53% and 21% in 'North' and 'South' cultivars, respectively. Where the heat treatment was imposed in 2% O(2) this increased (as compared with treatment at 21% O(2)) the inhibitory effect on CO(2) assimilation in tolerant cultivars, but decreased it in sensitive ones. The results suggested that differences in tolerance of moderately high temperatures in wheat relate to the stability of the Rubisco function and to RuBP regeneration activity rather than to the effects on PSII activity or stomatal control.     

Preparation of a monolithic capillary column with immobilized alpha-mannose for affinity chromatography of lectins

A simple method for the preparation of an affinity monolithic (also called continuous bed) capillary column for alpha-mannose-specific lectins is described. 2-Hydroxyethyl methacrylate in combination with (+)-N,N -diallyltartardiamide (DATD) and piperazine diacrylamide (PDA, 1,4-bisacryloyl-piperazine) as crosslinkers, were used as monomers for the monolith. After oxidation of DATD with periodate, alpha-mannose with spacer was bound to the aldehyde groups of the polymeric skeleton via reductive amination to form an affinity column for the separation, enrichment or binding studies of mannose-specific lectins. The permeability of the column was excellent. The porosity of the monolith was investigated by scanning electron microscope (SEM) and inverse size exclusion chromatography (ISEC). The affinity of the monolith was evaluated by frontal analysis (FA) and fluorescence microscopy (FM) using fluorescently labeled concanavalin (Con A). Frontal affinity chromatography showed a specific interaction of two different lectins with the alpha-mannose-modified monolith. According to FM the affinity sites were evenly distributed over the monolithic bed.