Rendiconti Delle Sedute E Brevi Comunicazioni

Abstract

The development of effective strategies to rehabilitate compromised environments is one of the major challenges facing the postindustrial society, since most of the habitats are becoming progressively polluted due to indiscriminate discharge of contaminants generated by anthropogenic activities. Several aquatic photosynthetic organisms can be used to treat wastewaters in primary and tertiary treatments, including cyanobacteria, algae and higher plants. In this review, we summarize the results obtained in the remediation of polluted waters by photosynthetic organisms and discuss the future perspective of phytoremediation.     

The impact of a salinity barrier on the partitioning of heavy metals in sediments of a tropical backwater system

Abstract

Concentrations of heavy metals (Cd, Co, Cr, Cu and Fe) in surface sediments and their partitioning behaviour between exchangeable, reducible (Fe-Mn oxide bound) and organic/residual phases of the sediments in a typical backwater system of Kerala, viz. the southern upstream part of Cochin Estuarine System (South India), have been studied. Spatial and temporal variations of trace metals are discussed with special reference to pH, dissolved oxygen, salinity, organic carbon and texture of sediment. Metal concentrations in the tide gated part of the estuary were found to be significantly higher when compared to metal concentrations reported from the unrestricted part of the Cochin estuarine system and also those from many of the unpolluted estuaries worldwide. The higher levels of heavy metals in the study area and their characteristic distribution and partitioning behaviour in the surficial sediments were attributed to the presence of a salinity barrier across the backwater system and also by the massive use of pesticides and chemical fertilizers in the vast area of agricultural land near the backwater system.     

Observations of a set of isomeric anti-lactose antibodies directed against a group D streptococcal polysaccharide

Sets of isomeric anti-lactose antibodies with specificity for the lactose units of a cell wall polysaccharide fromStreptococcus faecalis strain N were induced in rabbits immunized with a vaccine of nonviable cells of the organism. Such sets of anti-lactose antibodies were isolated from the serum of immunized animals by affinity chromatography on lactosyl-Sepharose. Gel electrofocusing experiments showed that the preparations consisted of multiprotein components. One preparation of antibodies of 13 isomers was separated into homogeneous components by liquid isoelectrofocusing. The individual isomeric antibodies exhibit specificity for the lactose units of the antigenic polysaccharide, possess isoelectric points in the range of 5.9–8.0, and belong to the IgG class of immunoglobulins, and each member yields one light chain and one heavy chain on dissociation in sodium dodecyl sulfate (SDS) and mercaptoethanol. These results have been interpreted as evidence for the assembly of the chains of isomeric antibodies by a single-chain pairing mechanism.     

Contribution of Lithologic and Anthropogenic Factors to Surface Soil Heavy Metals in Western Iran Using Multivariate Geostatistical Analyses

Heavy metals’ origin, accumulation, and distribution in soil have been the focus of much attention by many researchers. The objective of this study was to recognize the sources of heavy metals in surface soils in Hamadan Province in western Iran using multivariate geostatistical techniques. A total of 263 surface (0–10 cm) soil samples and 18 rock samples from major parent materials were collected. Cobalt (Co), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn) contents of the samples were determined. Selected soil physical and chemical characteristics were also measured. A multivariate geostatistical analysis was performed to identify the common source of heavy metals. The quantities of Co, Cr, and Ni were found to be associated with parent rocks, corresponding to the first factor termed the “lithologic component.” The second factor was mainly attributed to Cu, which also comprised the first and third factors, indicating a mixed source both from lithologic and anthropogenic inputs. Zn and Pb contents were related to the anthropogenic activities and comprised the third factor. A significant correlation was found between metals from the lithogenic sources and selected soil properties such as soil organic matter, clay, CEC, and carbonate, indicating an interaction among them. Generally, Zn and Pb showed a less significant correlation with soil properties.     

Localisation of nickel and mineral nutrients Ca,K, Fe,Mg by Scanning Electron Microscopy microanalysis in tissues of the nickel-hyperaccumulator Alyssum bertolonii Desv. and the non-accumulator Alyssum montanum L.

Plants of the nickel-hyperaccumulator Alyssum bertolonii Desv. and of the non-accumulator A. montanum L. growing on a serpentine site in Tuscany, Italy, and plants of A. montanum from a nearby non-serpentine site were analysed for metal concentration and localisation. The leaves of A. bertolonii contained 160 times more nickel than those of A. montanum from the same site, thus demonstrating its hyperaccumulation capacity towards this metal. On the other hand, both species showed an inversion of the Ca/Mg ratio in their organs relative to the soil. Nickel localisation in plant tissues was examined by Scanning Electron Microanalysis (SEM/EDX). In A. bertolonii, a specific pattern of nickel distribution was detected, with the highest concentrations present in parenchyma and sclerenchyma cells for the roots; in the shoots, the highest amounts of nickel were found in the stem epidermis, the leaf epidermal surface, and the leaf trichome base. This particular nickel tissue distribution pattern was not found in the non-accumulator A. montanum growing on serpentine soil. Other mineral nutrients, namely Mg, Ca, K, Fe, instead, had a similar distribution in the two species. The A. montanum plants from the non-serpentine site had very low nickel levels in their tissues, and these were of the same magnitude as those found in A. bertolonii plants grown in a greenhouse on commercial horticultural soil with low nickel concentration. In A. bertolonii plants, the tissue-specific allocation patterns appeared to depend on the degree of nickel hyperaccumulation, which is, in turn, directly linked to the soil characteristics.     

栽培条件对灵芝子实体中四种重金属含量的影响

以不同灵芝品种、不同栽培基质、不同栽培方式、不同生长时期获得的菌草灵芝和木屑灵芝为原料,对栽培基质及灵芝子实体中铅、砷、汞、镉4种重金属的含量参照国际标准进行检测,结果表明虽然菌草栽培基质中重金属含量高于木屑栽培基质,但菌草灵芝对重金属富集率远低于木屑灵芝,成熟期的菌草灵芝与木屑灵芝中的重金属含量均低于农业行业标准和国家标准。因此菌草可以替代木屑用作灵芝栽培的营养来源。     

刺楸年轮中重金属含量动态变化及富集特性

为探索刺楸对受污染土壤重金属的富集和修复效应, 以南京栖霞山的乡土树种刺楸及其根际周边土壤为研究对象, 截取其根基部年轮盘及根际土壤样本, 采用ICP-AES法测定年轮及土壤样本中重金属(Cu、Cd、Cr、Mn、Ni、Pb、Zn)元素含量。结果表明: 栖霞山样地中的土壤受Mn、Pb和Zn污染最为严重, 存在Cu、Cd、Mn、Pb、Zn元素的高度复合污染, Cd、Cr、Cu、Ni、Zn在土壤和年轮中存在相关性, Mn和Pb则没有表现出明显的相关性; 刺楸修复受Cd、Mn、Pb、Zn污染的土壤效果并不显著, 更适用于Cr、Cu、Ni污染的土壤修复; 鉴于Cu元素含量变化特征, 刺楸也可以作为反映当地污染历史的记录载体; 刺楸年轮中的重金属元素之间存在交互作用, 其中Cd与Zn元素含量高度相关(r=0.984, p<0.01), 在刺楸年轮吸收重金属元素的过程中, Cu与Cd、Cr、Mn、Zn元素具有协同作用, Mn元素对其他元素有一定的拮抗作用。     

Regional distribution characteristics and ecological risk assessment of heavy metal pollution of different land use in an antimony mining area – Xikuangshan,China

Abstract

Mining activities have introduced various heavy metals and metalloids to surrounding soil environments, causing adverse impacts to the ecological environment system. The extremely high concentration of various heavy metals and metalloids make the Xikuangshan (Hunan, China) an excellent model to assess their ecological risk. In this study, the soil samples from 26 locations of different land use methods in four areas (smelting area, road nearby ore, mining area, and ore tailing area) in Xikuangshan with different levels of various heavy metals and metalloids (Sb, As, Pb, and Cd) were analyzed; in addition, the index of geo-accumulation and the potential ecological risk index were used to evaluate ecological risk. The results showed that the average contents of Sb, As, Pb, and Cd in all soil samples were 4368.222?mg·kg^?1, 40.722?mg·kg^?1, 248.013?mg·kg^?1, and 40.941?mg·kg^?1, respectively, implying serious contamination of compound pollution of heavy metals in soil. The concentration of heavy metals in soil among smelting area, road nearby ore, mining area, and ore tailing area showed significant distribution characteristics of region because different mining activities such as smelting, mining, transportation, and stacking caused different pollution intensity. Moreover, the contents of Sb in soil samples decreased successively in residue field, wasteland, forestland, sediment, grassland, and vegetable field, and the contents of Sb in vegetable-field and ecological restoration grassland were relatively low, which indicate that the method of grassland ecological restoration is an effective method to control antimony pollution in soil. The results of ecological risk assessment showed that the antimony mining area was seriously polluted by Sb, As, Pb, and Cd, and had strong ecological risk, and Sb and Cd were the most important pollution factors, which indicated that the pollution of Sb and Cd should be a major concern of relevant departments of environment and health.     

Source apportionment and health risk quantification for heavy metal sources in soils near aluminum-plastic manufacturing facilities in northeast China

Abstract

Identifying the source effect on heavy metals to human health risk is essential for devising and implementing restoration policies for polluted soils. For this purpose, eight heavy metals (As, Cd, Hg, Cr, Cu, Ni, Pb, and Zn) in soil profile samples (0–10, 10–20, 20–30, and 30–40?cm) collected in the area around aluminum-plastic manufacturing facilities (APMF) were determined. An absolute principal component score multiple linear regression (APCS-MLR) model supported by a health risk assessment (HRA) model was developed to determine the source apportionment of soil heavy metals and contribution rate of pollution sources to human health risk. Results showed significant accumulations of eight metals in the topsoil (0–20?cm), parent material, transportation, APMF, and agricultural practices were the four major contributing sources for heavy metals in soils, with average contribution percentages of 21.69%, 24.99%, 29.60%, and 14.25%, respectively. Carcinogenic risk factors for adults (1.23E-04) and children (1.32E-04) were found to be above the acceptable level (1E-06 to 1E-04). The health risk quantification results indicated that parent material, APMF, transportation, agricultural practices, and unidentified factors accounted for 55.76%, 14.48%, 12.09%, 10.13%, and 7.54% of the carcinogenic risk for children and adults. The adverse impacts of Cd, Zn, and Pb accumulations in soil coming from APMF activities were significant and need to receive more attention.     

Spatial distribution and environmental risk assessment of heavy metals identified in soil of a decommissioned uranium mining area

Abstract

The spatial distribution of six heavy metals (Cd, As, Zn, Pb, Cr, and Cu) in the soil of a decommissioned uranium mining area was investigated and their potential environmental risk was assessed. Soil samples were collected along the main riversides enclosing the mining area. The heavy metal distribution was determined by geospatial interpolation. Pearson correlation coefficient and principal component analysis were used to locate the sources of pollution which are the mine ore as natural source, and dressing plants and tailing area from human activity. The results indicate that the average concentrations of As and Cd strongly exceed the recommended EQSS (Environmental Quality Standard for Soils of China) limits at all sampling sites, whereas Zn concentrations were found to be slightly over the limit only at sampling sites close to the mining area. The concentrations of Cr, Cu and Pb were all within the recommended limits. Environmental risk was assessed using the toxicity characteristic leaching procedure defining the degree to which extend the metal is released into the solution. High leaching rates were found only for Zn and Cd, suggesting that together with its high concentrations Cd is the most toxic metal around the mining area, followed by As.