Subcellular Distribution and Chemical Forms of Cadmium in the Medicine Food Homology Plant <i>Platycodon grandiflorum</i> (Jacq.) A.DC.

Although Platycodon grandiflorum (Jacq.) A.DC. is a renowned medicine food homology plant, reports of excessive cadmium (Cd) levels are common, which affects its safety for clinical use and food consumption. To enable its Cd levels to be regulated or reduced, it is necessary to first elucidate the mechanism of Cd uptake and accumulation in the plant, in addition to its detoxification mechanisms. This present study used inductively couple plasma-mass-spectrometry to analyze the subcellular distribution and chemical forms of Cd in different tissues of P. grandiflorum. The experimental results showed that Cd was mainly accumulated in the roots [predominantly in the cell wall (50.96%–61.42%)], and it was found primarily in hypomobile and hypotoxic forms. The proportion of Cd in the soluble fraction increased after Cd exposure, and the proportion of insoluble phosphate Cd and oxalate Cd increased in roots and leaves, with a higher increase in oxalate Cd. Therefore, it is likely that root retention mechanisms, cell wall deposition, vacuole sequestration, and the formation of low mobility and low toxicity forms are tolerance strategies for Cd detoxification used by P. grandiflorum. The results of this study provide a theoretical grounding for the study of Cd accumulation and detoxification mechanisms in P. grandiflorum, and they can be used as a reference for developing Cd limits and standards for other medicine food homology plants.     

Interactions between the toxicity of the heavy metals cadmium,copper, zinc in combinations and the detoxifying role of calcium in the brown algaCystoseira barbata

The toxicity of three heavy metals, Cd, Cu and Zn, and the detoxifying role of Ca have been studied for the brown algaCystoseira barbata formaaurentia after a 4-week laboratory culture. The experimental design was based upon a complete factorial design 2^k, which seems to be the first time it has been used in algal physiology. It was demonstrated that these three elements, applied jointly, act on weight-growth, chlorophyll a, c and carotenoid synthesis and Cd, Cu and Zn uptake. Cd and Zn act in synergy or in antagony, depending on their exogenous concentrations, on chlorophyll a and on carotenoid synthesis. Zn is antagonistic towards Cd and Cu on weight-growth in the combination Cd-Cu-Zn. From different element combinations, the protective role of Ca appears evident on weight-growth (Cd-Zn-Ca and Cu-Ca), chlorophyll a (Cd-Cu-Ca and Cu-Zn-Ca), chlorophyll c (Cd-Ca), carotenoid synthesis (Cd-Cu-Ca and Cu-Zn-Ca), Cd and Cu uptake (Cd-Cu-Ca) and Zn uptake (Cu-Zn-Ca). This role is confirmed by cytological investigations. This is apparently the first report concerning a Ca interaction with toxicity of heavy metals applied in combinations. However, the mechanisms of tolerance remain unknown.     

In Vitro,In Silico,ADME and Theoretical Analysis of Mn(II) and Co(II) Complexes Derived from Methyl-(Z)-N′-Carbamothioylcarbamohydrazonate Schiff Base Ligand

Mn(II) and Co(II) complexes of methyl-(Z)−N′-carbamothioylcarbamohydrazonate Schiff base ligand were synthesized. The ligand and metal salts were taken in 2 : 1 stoichiometric ratio. All the synthesized complexes were characterized using elemental analysis, molar conductance, magnetic moment and various spectroscopic techniques (FT-IR, UV/VIS, EPR) techniques. Elemental and spectroscopic results verified bidentate donor nature of the ligand and octahedral geometry of all the complexes. The non-electrolytic nature of Mn(II) and Co(II) complexes were suggested by conductivity data analysis. In vitro antibacterial (E. coli and S. aureus) and antifungal (C. albicans and C. tropicalis) screening were achieved by employing agar well diffusion method which revealed better antimicrobial activity of Co(II) complexes than Mn(II) complexes. In silico SwissADME study predicted the drug-likeness probability of ligand and complexes. The interaction of two bacterial proteins (E. coli and S. aureus) with compounds was also analyzed using molecular docking study, which corroborate the in vitro analysis.     

Steel Anti-Corrosion Strategy Enables Long-Cycle Zn Anode

The progress of aqueous zinc batteries (AZBs) is limited by the poor cycling life due to Zn anode instability, including dendrite growth, surface corrosion, and passivation. Inspired by the anti-corrosion strategy of steel industry, a compounding corrosion inhibitor (CCI) is employed as the electrolyte additive for Zn metal anode protection. It is shown that CCI can spontaneously generate a uniform and ≈30 nm thick solid-electrolyte interphase (SEI) layer on Zn anode with a strong adhesion via Zn O bonding. This SEI layer efficiently prohibits water corrosion and guides homogeneous Zn deposition without obvious dendrite formation. This enables reversible Zn deposition and dissolution for over 1100 h under the condition of 1 mA cm⁻² and 1 mAh cm⁻² in symmetric cells. The Zn-MnO₂ full cells with CCI-modified electrolyte deliver an ultralow capacity decay rate (0.013% per cycle) at 0.5 A g⁻¹ over 1000 cycles. Such an innovative strategy paves a low-cost way to achieve AZBs with long lifespan.     

Engineered nickel bioaccumulation in Escherichia coli by NikABCDE transporter and metallothionein overexpression

Mine wastewater often contains dissolved metals at concentrations too low to be economically extracted by existing technologies, yet too high for environmental discharge. The most common treatment is chemical precipitation of the dissolved metals using limestone and subsequent disposal of the sludge in tailing impoundments. While it is a cost-effective solution to meet regulatory standards, it represents a lost opportunity. In this study, we engineered Escherichia coli to overexpress its native NikABCDE transporter and a heterologous metallothionein to capture nickel at concentrations in local effluent streams. We found the engineered strain had a 7-fold improvement in the bioaccumulation performance for nickel compared to controls, but also observed a drastic decrease in cell viability due to metabolic burden or inducer (IPTG) toxicity. Growth kinetic analysis revealed the IPTG concentrations used based on past studies lead to growth inhibition, thus delineating future avenues for optimization of the engineered strain and its growth conditions to perform in more complex environments.     

Submitochondrial particles asin vitro biosensors of heavy metal toxicity

The effects on mitochondrial respiratory parameters of heavy metals, such as Cu, Ni, Pb, Cd, Zn, Ag, Hg, were recorded by using thein vitro response of submitochondrial particles (SMP) from beef heart mitochondria.The toxicity of these elements was estimated by determining their effects on the energy-coupled reverse electron transfer (RET), which is induced by ATP and succinate at first site level of the respiratory chain in SMP.The RET rate was easily monitored by recording spectrophotometrically at 340 nm the production of NADH, arising from the reduction of exogenous NAD⁺ by RET.The toxicity values were expressed as the toxicant molar concentration which decreases the rate of reduction of NAD⁺ to an extent of 50 percent (EC50). The toxicity increased in the following order: Ni²⁺2+2+< Cd²⁺2+2++.The SMP data were compared with the toxicity values obtained from a variety of biological systems currently used for toxicity testing. The results obtained demonstrate that the SMP test generally provides a good estimate of metal toxicity for several fish and invertebrate species. This is demonstrated by the statistical parameters obtained in the regression analysis. The broadened 95% confidence intervals and, in particular, the poor correlations obtained for some aquatic organisms can be ascribed to the more complex metabolic interactions and competing toxic pathways in aquatic organisms, when compared to SMP.     

超低能重离子注入作物育种的原初物理机制

从原子核物理学观点出发,采用理论分析与实验测量并举的方法对超级能（〈２００ｋｅｖ）重离子（Ｚ≥６）注入作物（小麦）种子进行诱变育种的原初物理机制进行了研究,结果表明,无论是注入离子本身的射程,还是次级电子,自由基扩散,高温热穗,级联原子和冲击波等次级作用范围都无法触及表皮下面的胚细胞,但注入离子在麦胚内主要元素（Ｃ,Ｎ,Ｏ,Ｓ,Ｐ,Ｋ,Ｃａ）上激发出的特征Ｘ－射线,在其强度减弱为原来的１０＾－３时     

Formation of dioxygen complexes of transition metal chelates in oxygen saturated aprotic solvents. Cyclic voltammetric evidence at a micro glassy carbon disk electrode

Cyclic voltammetry at a micro electrode of Co(II) salen, Fe(II) salen, electrode generated Fe(II)(acac)₂, Fe(II) (salicylaldehyde)₂, Fe(II) (salicylaldoxime)₂, Fe(II) (bipy)₃, Fe(II) (bipy)₂, Co(II) (bipy)₃, Co(II) (benzacac)₂, and electrode generated Co(acac)₂ in oxygen saturated aprotic solvents show positive shift of the O₂ sigmoidal wave, as well as enhancement of the limiting current in the case of the first five compounds. In the case of Co(II) (bipy)₃ the slope of the sigmoidal wave due to O₂ becomes more positive, while for the other two Co(II) complexes there is no change except a small decrease in the wave height. The data are used to correlate and predict the O₂ binding properties of the chelates in solution. The data for the diketone complexes of Co(II) indicate absence of any direct association, which is in line with the interpretation offered in the literature on the mechanism of their catalytic role in the O₂ oxidation of substrates. The mechanism of the autoxidation of dimethylformamide in the presence of Fe(III) (bipy)₃ and Cu(II) (bipy)₂ is elucidated by the observation that these higher valent compounds are reduced to their next lower oxidation state by DMF.     

Effects of methylmercury and inorganic mercury on periphytic diatom communities in freshwater indoor microcosms

The effects of inorganic mercury (HgII) and methylmercury (MeHg) on the colonization of artificial substrates by periphytic diatoms were studied using indoor freshwater microcosms. These consisted of a mixed biotope– water column + natural sediment – with rooted macrophyte cuttings (Elodea densa) and benthic bivalve molluscs (Corbicula fluminea).The periphyton was collected on glass slides in the water column after 34and 71 days. The two Hg sources were introduced either by daily additions to the water column, or once at the beginning into the sediment, using two nominal concentrations: water column, 0.5 μgL^-1 and 2 μg L^-1 for both compounds: sediment, 0.5 mg kg^-1 (fw) and 2 mgkg^-1 (fw) for MeHg and 1 mg kg^-1 (fw) and 10 mgkg^-1 (fw) for HgII. Several complementary criteria were used to analyse the structural and functional perturbations induced: cell density, species richness, diatom size, relative abundance. Exposure to MeHg added to the water column resulted in reduced cell density and changes in species composition with enhancement of e.g. Fallacia pygmaea or Nitzschia palea; inorganic Hg had less effect on the population structure. After contamination via the sediment, the effects of the two compounds were less pronounced than for the water source. This revised version was published online in August 2006 with corrections to the Cover Date.     

Theoretical Study of the TiO2 and MgO Surface Acidity and the Adsorption of Acids and Bases

We present ab-initio periodic Hartree–Fock calculations (crystal program) of small molecules on TiO₂ and MgO. The adsorption of the molecules may be molecular or dissociative. This depends on their acid and basic properties in the gas phase. For the molecular adsorption, the molecules are adsorbed as bases on Ti(+IV) sites, the adsorption energies correlate with the proton affinities. The dissociations on the surface correlate with the gas phase cleavages: thus, the dissociation of MeOH leads to a preferential basic cleavage (the fragment HO– is adsorbed on a Ti⁺⁴ ion and the fragment Me⁺ is adsorbed on a O²– ion of the oxide). The opposite result is obtained with MeSH. Another important factor is the adsorbate–adsorbate interaction: favorable cases are a sequence of H-bonds for the hydroxyl groups resulting from the water dissociation and the mode of adsorption for the ammonium ions. Lateral interactions also force the adsorbed CO₂ molecules to bend over the surface so that their mutual orientation resembles the geometry of the CO₂ dimer. With respect to water adsorption, MgO appears to be a basic oxide. As experimentally observed, NH₃ adsorbs preferentially on TiO₂ and CO₂ on MgO. However, this difference of reactivity should not be expressed in terms of acid vs. basic behaviour but in terms of hard and soft acidity. The MgO surface is a 'soft' acidic surface that reacts preferentially with the soft base, CO₂.