Algal biotechnology products and processes — matching science and economics

Several microalgae, such as species ofChlorella, Spirulina andDunaliella, are grown commercially and algal products such as -carotene and phycocyanin are available. The main focus of algal biotechnology continues to be on high value fine chemicals and on algae for use as aquaculture feeds. This paper provides the outline for a rational approach in evaluating which algae and which algal products are the most likely to be commercially viable. This approach involves some simple market analysis followed by economic modelling of the whole production process. It also permits an evaluation of which steps in the production process have the greatest effect on the final production cost of the alga or algal product, thus providing a guide as to what area the research and development effort should be directed to. An example of this approach is presented and compared with other models. The base model used here gives a production cost of microalgal biomass at about AS 14 to 15 kg^–1, excluding the costs of further processing, packaging and marketing. The model also shows that some of the key factors in microalgal production are productivity, labor costs and harvesting costs. Given the existing technology, high value products such as carotenoids and algal biomass for aquaculture feeds have the greatest commercial potential in the short term.This paper was presented at the Symposium on Applied Phycology at the Fourth International Phycological Congress, Duke University.     

A rapid method for harvesting and immobilization of oleaginous microalgae using pellet-forming filamentous fungi and the application in phytoremediation of secondary effluent

A rapid method for harvesting and immobilization of oleaginous microalgae using pellet-forming filamentous fungi was developed. The suitable conditions for pellet formation by filamentous fungi were determined. Among the strains tested, Trichoderma reesei QM 9414 showed superior pellet forming ability. Its pellets were used to harvest oleaginous microalga Scenedesmus sp. With increasing volume ratio of fungal pellets to microalgae culture up to 1:2, >94% of microalgal cells were rapidly harvested within 10 min. The ratio of fungal pellets could manipulate both harvesting time and initial concentration of microalgal cells in the pellets. The microalgae–fungal pellets were successfully used as immobilized cells for effective phytoremediation of secondary effluent from seafood processing plants under nonsterile condition. The chemical oxygen demand, total nitrogen, and total phosphorus removal were >74%, >44%, and >93%, respectively. The scanning electron microscopy showed that the microalgal cells were not only entrapped in the pellets but also got attached to the fungal hyphae with sticky exopolysaccharides, possibly secreted by the fungi. The extracted lipids from the pellets were mainly composed of C16–C18 (>83%) with their suitability as biodiesel feedstocks. This study has shown the promising strategy to rapidly harvest and immobilize microalgal cells and the possible application in phytoremediation of industrial effluent.     

Significantly Enhancing the Efficiency of a New Light‐Harvesting Polymer with Alkylthio naphthyl Substituents Compared to Their Alkoxyl Analogs

In this work, a new benzo[1,2‐b:4,5‐b′]dithiophene (BDT) building block containing alkylthio naphthyl as a side chain is designed and synthesized, and the resulting polymer, namely PBDTNS‐BDD, shows a lower HOMO energy level than that of its alkoxyl naphthyl counterpart PBDTNO‐BDD. An optimized photovoltaic device using PBDTNS‐BDD as a donor exhibits power conversion efficiencies (PCE) of 8.70% and 9.28% with the fullerene derivative PC₇₁BM and the fullerene‐free small molecule ITIC as acceptors, respectively. Surprisingly, ternary blend devices based on PBDTNS‐BDD and two acceptors, namely PC₇₁BM and ITIC, shows a PCE of 11.21%, which is much higher than that of PBDTNO‐BDD based ternary devices (7.85%) even under optimized conditions.     

Versatile Core–Sheath Yarn for Sustainable Biomechanical Energy Harvesting and Real‐Time Human‐Interactive Sensing

The emergence of stretchable textile‐based mechanical energy harvester and self‐powered active sensor brings a new life for wearable functional electronics. However, single energy conversion mode and weak sensing capabilities have largely hindered their development. Here, in virtue of silver‐coated nylon yarn and silicone rubber elastomer, a highly stretchable yarn‐based triboelectric nanogenerator (TENG) with coaxial core–sheath and built‐in spring‐like spiral winding structures is designed for biomechanical energy harvesting and real‐time human‐interactive sensing. Based on the two advanced structural designs, the yarn‐based TENG can effectively harvest or respond rapidly to omnifarious external mechanical stimuli, such as compressing, stretching, bending, and twisting. With these excellent performances, the yarn‐based TENG can be used in a self‐counting skipping rope, a self‐powered gesture‐recognizing glove, and a real‐time golf scoring system. Furthermore, the yarn‐based TENG can also be woven into a large‐area energy‐harvesting fabric, which is capable of lighting up light emitting diodes (LEDs), charging a commercial capacitor, powering a smart watch, and integrating the four operational modes of TENGs together. This work provides a new direction for textile‐based multimode mechanical energy harvesters and highly sensitive self‐powered motion sensors with potential applications in sustainable power supplies, self‐powered wearable electronics, personalized motion/health monitoring, and real‐time human‐machine interactions.     

Apoprotein heterogeneity increases spectral disorder and a step-wise modification of the B850 fluorescence peak position

It has already been established that the quaternary structure of the main light-harvesting complex (LH2) from the photosynthetic bacterium Rhodopseudomonas palustris is a nonameric ‘ring’ of PucAB heterodimers and under low-light culturing conditions an increased diversity of PucB synthesis occurs. In this work, single molecule fluorescence emission studies show that different classes of LH2 ‘rings’ are present in “low-light” adapted cells and that an unknown chaperon process creates multiple sub-types of ‘rings’ with more conformational sub-states and configurations. This increase in spectral disorder significantly augments the cross-section for photon absorption and subsequent energy flow to the reaction centre trap when photon availability is a limiting factor. This work highlights yet another variant used by phototrophs to gather energy for cellular development.     

Structure and function of wild-type and subunit-depleted photosystem I in Synechocystis

The ability of photosynthetic organisms to use the sun's light as a sole source of energy sustains life on our planet. Photosystems I (PSI) and II (PSII) are large, multi-subunit, pigment–protein complexes that enable photosynthesis, but this intriguing process remains to be explained fully. Currently, crystal structures of these complexes are available for thermophilic prokaryotic cyanobacteria. The mega-Dalton trimeric PSI complex from thermophilic cyanobacterium, Thermosynechococcus elongatus, was solved at 2.5?Å resolution with X-ray crystallography. That structure revealed the positions of 12 protein subunits (PsaA-F, PsaI-M, and PsaX) and 127 cofactors.Although mesophilic organisms perform most of the world's photosynthesis, no well-resolved trimeric structure of a mesophilic organism exists. Our research model for a mesophilic cyanobacterium was Synechocystis sp. PCC6803. This study aimed to obtain well-resolved crystal structures of [1] a monomeric PSI with all subunits, [2] a trimeric PSI with a reduced number of subunits, and [3] the full, trimeric wild-type PSI complex. We only partially succeeded with the first two structures, but we successfully produced the trimeric PSI structure at 2.5?Å resolution. This structure was comparable to that of the thermophilic species, but we provided more detail. The PSI trimeric supercomplex consisted of 33 protein subunits, 72 carotenoids, 285 chlorophyll a molecules, 51 lipids, 9 iron-sulfur clusters, 6 plastoquinones, 6 putative calcium ions, and over 870 water molecules.This study showed that the structure of the PSI in Synechocystis sp. PCC6803 differed from previously described PSI structures. These findings have broadened our understanding of PSI structure.     

An affordable apparatus for fine‐controlled emulation of buzzing frequencies of bees for the testing hypothesis in buzz interactions

The buzzing foraging behavior of female bees for pollen harvesting called the attention of early pollination biologists. Flower types that demand this buzzing behavior comprise about 20,000 species of different and phylogenetically unrelated plant taxa, suggesting that it had independently evolved many times among the flowering plants. Between the late 1970s and early 1980s, theoretical papers had modeled the energetics of buzz pollination, but, up to this moment, no hypothesis was experimentally tested concerning the theoretical basis of the energetics of buzz pollination. We present a cost‐effective and simple apparatus, including a digital and highly accurate frequency generator, and a device for the transference of buzz‐frequency energy to the receptive floral unity. The receptive floral unities may comprise the entire or partial androecium, or the tubular corolla, or, in some cases, the whole flower. This apparatus can be easily used in both laboratory and field conditions of research, as natural air currents are avoided, and the response of pollen liberation can be quantitatively measured by pollen grain counts that can be captured by adhesion in slide poured with an isosmotic lactate–glycerol media. The maximum displacement of the hardwire beam/claw system was 0.1170 ± 0.0006 mm @ 150 Hz; 0.021 ± 0.003 mm @ 250 Hz; 0.010 ± 0.001 mm @ 350 Hz; 0.0058 ± 0.0001 mm @ 450 Hz; and 0.0082 ± 0.0005 mm @ 550 Hz. Hypothesis contrasting frequency emission and pollen liberation measured as pollen grain counts may be tested in a species flower type by simple linear regression if pollen counts are normally distributed, or ordinal logistic regression, with non‐normal counts. The comparison among different flower‐type requirements can be tested through appropriate statistical methods for both normally and non‐normally distributed pollen grain counts.     

Physical control of Eurasian watermilfoil in an oligotrophic lake

The introduction of Eurasian watermilfoil (Myriophyllum spicatum) into oligotrophic waters of high water clarity in temperate zones of North America has produced growth in excess of 6 m depth and yearly biomass approaching 1000 g m^–2 dry weight. From its initial observation in Lake George, New York, USA in 1985, by 1993 milfoil had spread to 106 discrete locations within the lake. A 7-year study of one site having no management showed milfoil to grow expansively, suppressing native plant species from 20 in 1987 to 6 in 1993 with the average number of species m^–2 quadrat declining from 5.5 in 1987 to less than 2 in 1993. Management of milfoil by means of hand harvesting, suction harvesting and benthic barrier has reduced the number of unmanaged sites from 106 in 1993 to 11. One year post-treatment at sites utilizing suction harvesting, showed a greater number of native species at all sites than pretreatment with a substantial reduction in milfoil biomass. At sites where benthic barrier was removed 1–2 years after installation, milfoil had recolonized 44% of grid squares within 30 days. Ninety days after barrier removal 74% of grid squares contained milfoil and one year later 71% of the grids supported milfoil. During the first year following mat removal, the average number of species m^–2 peaked at 4.7 and stabilized at 4.5 during the second year. Hand harvesting by SCUBA in areas of limited milfoil growth (new sites of infestation and sites of former treatment) was found to reduce the number of milfoil plants present in subsequent years. Hand harvesting did not eliminate milfoil at any of the sites and regrowth/colonization necessitated reharvesting every 3 or more years. Results of evaluations of physical plant management techniques indicate that (1) an integrated program utilizing different techniques based on plant density reduced the growth of milfoil and (2) long term commitment to aquatic plant management is necessary since none of the techniques employed singly were found to eliminate milfoil.     

The influence of stand development on nutrient demand,growth and allocation

As an even-aged stand develops growth is concentrated first on leaves and fine roots, as a result nutrient accumulation is very rapid. During this early stage there is a distinct species effect whereas later nutrient uptake becomes a function of growth rate irrespective of species. Once canopy is closed up to two thirds of the nutrients required for growth can be obtained by retranslocation from older or dying tissues, an efficient conservation mechanism that leads to a reduction in the demands that are further reduced by the cycle through the litter layer. In consequence nutritional problems are most likely in the early years while the green crown is being constructed. Later in the rotation problems are unlikely unless nutrient cycles are disturbed, for example by thinning or as a result of excessive accumulation of humus. The eventual clear felling is a major disruption to nutrient cycles. Accelerated litter decomposition can lead to leaching losses, although this can be short lived, and burning if practised can have a major impact on poor sites. Nutrient loss in material removed from the felling site, whether or not harvested, is not high but is much increased if crowns are removed, particularly for the heavily crowned species. The importance of such loss clearly varies with site but may be significant for more than just loss of nitrogen, with loss of calcium, phosphorus or even organic matter per se all being possibly causes of worry.     

The role of birds in sustainable food production

Birds (Class Aves) are already an important source of food in most parts of the world. Only a few species have been successfully domesticated but many others are harvested from the wild. There is potential for greater use of birds as a food source. Existing domesticated species, especially galliforms, need to be better utilized. Certain new species could be brought into domestication. The efficiency and sustainability of harvesting methods for free-living birds might be improved and the harvesting of new species should be considered. These measures could be compatible with improved conservation of wild birds and their habitats, but careful planning and surveillance are essential prerequisites.