Three-dimensional Orthotropic Viscoelastic Finite Element Model of a Human Ligament

Ligaments undergo finite strain displaying hyperelastic behaviour as the initially tangled fibrils present straighten out, combined with viscoelastic behaviour (strain rate sensitivity). In the present study the anterior cruciate ligament of the human knee joint is modelled in three dimensions to gain an understanding of the stress distribution over the ligament due to motion imposed on the ends, determined from experimental studies. A three dimensional, finite strain material model of ligaments has recently been proposed by Pioletti in Ref. [2]. It is attractive as it separates out elastic stress from that due to the present strain rate and that due to the past history of deformation. However, it treats the ligament as isotropic and incompressible. While the second assumption is reasonable, the first is clearly untrue. In the present study an alternative model of the elastic behaviour due to Bonet and Burton (Ref. [4]) is generalized. Bonet and Burton consider finite strain with constant modulii for the fibres and for the matrix of a transversely isotropic composite. In the present work, the fibre modulus is first made to increase exponentially from zero with an invariant that provides a measure of the stretch in the fibre direction. At 12% strain in the fibre direction, a new reference state is then adopted, after which the material modulus is made constant, as in Bonet and Burton's model. The strain rate dependence can be added, either using Pioletti's isotropic approximation, or by making the effect depend on the strain rate in the fibre direction only.

A solid model of a ligament is constructed, based on experimentally measured sections, and the deformation predicted using explicit integration in time. This approach simplifies the coding of the material model, but has a limitation due to the detrimental effect on stability of integration of the substantial damping implied by the nonlinear dependence of stress on strain rate. At present, an artificially high density is being used to provide stability, while the dynamics are being removed from the solution using artificial viscosity. The result is a quasi-static solution incorporating the effect of strain rate. Alternate approaches to material modelling and integration are discussed, that may result in a better model.     

Validation of density–elasticity relationships for finite element modeling of human pelvic bone by modal analysis

In total hip arthroplasty and particularly in revision surgery, computer assisted pre-operative prediction of the best possible anchorage strategy for implant fixation would be a great help to the surgeon. Computer simulation relies on validated numerical models. In the current study, three density–elasticity relationships (No. 1–3) from the literature for inhomogeneous material parameter assignment from CT data in automated finite element (FE) modeling of long bones were evaluated for their suitability for FE modeling of human pelvic bone. Numerical modal analysis was conducted on 10 FE models of hemipelvic bone specimens and compared to the gold standard provided by experimental modal analysis results from a previous in-vitro study on the same specimens. Overall, calculated resonance frequencies came out lower than measured values. Magnitude of mean relative deviation of numerical resonance frequencies with regard to measured values is lowest for the density–elasticity relationship No. 3 (−15.9%) and considerably higher for both density–elasticity relationships No. 1 (−41.1%) and No. 2 (−45.0%). Mean MAC values over all specimens amount to 77.8% (No. 1), 78.5% (No. 2), and 83.0% (No. 3). MAC results show, that mode shapes are only slightly influenced by material distribution. Calculated resonance frequencies are generally lower than measured values, which indicates, that numerical models lack stiffness. Even when using the best suited (No. 3) out of three investigated density–elasticity relationships, in FE modeling of pelvic bone a considerable underestimation of model stiffness has to be taken into account.     

Effect of the anisotropic permeability in the frequency dependent properties of the superficial layer of articular cartilage

Abstract

Articular cartilage is a tissue of fundamental importance for the mechanics of joints, since it provides a smooth and lubricated surface for the proper transfer of loads. From a mechanical point of view, this tissue is an anisotropic poroviscoelastic material: its characteristics at the macroscopic level depend on the complex microscopic architecture. With the ability to probe the local microscopic features, dynamic nanoindentation test is a powerful tool to investigate cartilage mechanics. In this work we focus on a length scale where the time dependent behaviour is regulated by poroelasticity more than viscoelasticity and we aim to understand the effect of the anisotropic permeability on the mechanics of the superficial layer of the articular cartilage. In a previous work, a finite element model for the dynamic nanoindentation test has been presented. In this work, we improve the model by considering the presence of an anisotropic permeability tensor that depends on the collagen fibers distribution. Our sensitivity analysis highlights that the permeability decreases with increasing indentation, thus making the tissue stiffer than the case of isotropic permeability, when solicited at the same frequency. With this improved model, a revised identification of the mechanical and physical parameters for articular cartilage is provided. To this purpose the model was used to simulate experimental data from tests performed on bovine tissue, giving a better estimation of the anisotropy in the elastic properties. A relation between the identified macroscopic anisotropic permeability properties and the microscopic rearrangement of the fiber/matrix structure during indentation is also provided.     

微区XRF技术分析无机元素在植物中的原位分布

植物的无机元素分布特征对植物生理过程具有重要的指标作用, 可揭示营养物质分布、代谢途径及毒理耐受性等多种生命过程。用微区XRF技术测试样品中无机元素的分布, 具有原位无损、可进行较大面积样品连续成像分析以及前处理过程简单等诸多优势。将微区XRF技术应用于植物样品不同器官的无机元素分布检测, 旨在探讨该技术在植物样品测试中的仪器参数选择、样品前处理方法和数据后处理手段等对测试结果的影响。为得到可靠的实验结果, 对不同含水量的器官进行不同的前处理, 并比较不同驻留时间、测试腔体真空与否等仪器条件对测试结果的影响, 同时对数据处理方法进行探索, 包括对获得的数据进行图像叠加及对不同元素浓度比例进行半定量分析。研究结果表明, 微区XRF技术测试植物样品中无机元素分布具有一定的技术优势。     

转座子来源的植物长链非编码RNA

转座子是基因组的重要组分, 影响基因组的结构与稳定。长链非编码RNA (lncRNA)在转录及转录后水平调控多个生物学过程。转座子与lncRNA是物种进化的重要驱动力。含有转座子序列的lncRNA在自然界广泛存在。该文对植物lncRNA的发掘策略和功能研究进行概述, 围绕植物转座子来源lncRNA (TE-lncRNA)的分布和功能展开综述, 并对植物TE-lncRNA的调控机制、表观修饰及育种潜势等进行探讨与展望。     

Expansion of MIR482/2118 by a class‐II transposable element in cotton

Some plant microRNA (miRNA) families contain multiple members generating identical or highly similar mature miRNA variants. Mechanisms underlying the expansion of miRNA families remain elusive, although tandem and/or segmental duplications have been proposed. In this study of two tetraploid cottons, Gossypium hirsutum and Gossypium barbadense, and their extant diploid progenitors, Gossypium arboreum and Gossypium raimondii, we investigated the gain and loss of members of the miR482/2118 superfamily, which modulates the expression of nucleotide‐binding site leucine‐rich repeat (NBS‐LRR) disease resistance genes. We found significant expansion of MIR482/2118d in G. barbadense, G. hirsutum and G. raimondii, but not in G. arboreum. Several newly expanded MIR482/2118d loci have mutated to produce different miR482/2118 variants with altered target‐gene specificity. Based on detailed analysis of sequences flanking these MIR482/2118 loci, we found that this expansion of MIR482/2118d and its derivatives resulted from an initial capture of an MIR482/2118d by a class‐II DNA transposable element (TE) in G. raimondii prior to the tetraploidization event, followed by transposition to new genomic locations in G. barbadense, G. hirsutum and G. raimondii. The ‘GosTE’ involved in the capture and proliferation of MIR482/2118d and its derivatives belongs to the PIF/Harbinger superfamily, generating a 3‐bp target site duplication upon insertion at new locations. All orthologous MIR482/2118 loci in the two diploids were retained in the two tetraploids, but mutation(s) in miR482/2118 were observed across all four species as well as in different cultivars of both G. barbadense and G. hirsutum, suggesting a dynamic co‐evolution of miR482/2118 and its NBS‐LRR targets. Our results provide fresh insights into the mechanisms contributing to MIRNA proliferation and enrich our knowledge on TEs.     

外源硫对镉胁迫下马齿苋光合性状和矿质元素吸收的影响

从光合反应系统揭示外源硫(S)诱导马齿苋镉(Cd)耐受性的生理机制,为外源S缓解重金属毒害提供理论依据.采用营养液培养,研究外源S供体(NH4)2SO4对100 mg/L Cd胁迫下马齿苋叶片光合色素、光合特性、叶绿素荧光参数和矿质营养元素的影响.结果表明,Cd胁迫可显著降低马齿苋叶片中叶绿素a和叶绿素b含量;净光合速率、蒸腾速率、气孔导度均显著降低,而胞间二氧化碳浓度上升,表明非气孔因素是Cd胁迫诱导马齿苋光合抑制的主要因素;同时,PSⅡ实际光化学效率(ФPSII)、电子传递效率(J)、化学猝灭系数(qP)显著下降,而非化学猝灭系数(qN)显著上升,表明Cd胁迫影响马齿苋PSⅡ反应系统的正常运行.外施400 mg/L(NH4)2SO4显著提高马齿苋叶片叶绿素a含量、叶绿素b含量和叶绿素a/b比值,增强马齿苋叶片光合作用和PSⅡ原初光化学反应量子效率.对5种与光反应系统密切相关的矿质元素含量进行分析发现,Cd处理显著增加马齿苋叶片中的Ca和Fe含量,显著抑制马齿苋对Mg、Mn和Cu的吸收.Cd胁迫下马齿苋叶片的变黄与Mg、Mn的亏缺有关,而与Fe缺乏无关;添加外源S可显著提升马齿苋叶片中Ca、Mg、Fe、Cu和Mn含量,从而增强Cd胁迫下马齿苋叶片的PSII反应系统功能.     

枯草芽孢杆菌表达与调控工具相关研究进展

枯草芽孢杆菌作为革兰氏阳性模式微生物,由于其清晰的遗传背景、高效的分泌能力以及简单的培养条件等优势被广泛的应用于生物技术产业。近年来,随着代谢工程与合成生物学的发展,枯草芽孢杆菌相关表达系统与调控工具研究也取得了很大进展。围绕枯草芽孢杆菌动态调控工具的研究进展,分别从转录水平调控和转录后水平调控两个层面上进行综述,并对调控元件在生物技术中的应用进行了讨论。最后,对未来枯草芽孢杆菌表达与调控工具的发展进行了展望。