Climate change amplifies gross nitrogen turnover in montane grasslands of Central Europe in both summer and winter seasons

The carbon‐ and nitrogen‐rich soils of montane grasslands are exposed to above‐average warming and to altered precipitation patterns as a result of global change. To investigate the consequences of climatic change for soil nitrogen turnover, we translocated intact plant–soil mesocosms along an elevational gradient, resulting in an increase of the mean annual temperature by approx. 2 °C while decreasing precipitation from approx. 1500 to 1000 mm. Following three years of equilibration, we monitored the dynamics of gross nitrogen turnover and ammonia‐oxidizing bacteria (AOB) and archaea (AOA) in soils over an entire year. Gross nitrogen turnover and gene levels of AOB and AOA showed pronounced seasonal dynamics. Both summer and winter periods equally contributed to cumulative annual N turnover. However, highest gross N turnover and abundance of ammonia oxidizers were observed in frozen soil of the climate change site, likely due to physical liberation of organic substrates and their rapid turnover in the unfrozen soil water film. This effect was not observed at the control site, where soil freezing did not occur due to a significant insulating snowpack. Climate change conditions accelerated gross nitrogen mineralization by 250% on average. Increased N mineralization significantly stimulated gross nitrification by AOB rather than by AOA. However, climate change impacts were restricted to the 2–6 cm topsoil and rarely occurred at 12–16 cm depth, where generally much lower N turnover was observed. Our study shows that significant mineralization pulses occur under changing climate, which is likely to result in soil organic matter losses with their associated negative impacts on key soil functions. We also show that N cycling processes in frozen soil can be hot moments for N turnover and thus are of paramount importance for understanding seasonal patterns, annual sum of N turnover and possible climate change feedbacks.     

Numerical investigations of rib fracture failure models in different dynamic loading conditions

Rib fracture is one of the most common thoracic injuries in vehicle traffic accidents that can result in fatalities associated with seriously injured internal organs. A failure model is critical when modelling rib fracture to predict such injuries. Different rib failure models have been proposed in prediction of thorax injuries. However, the biofidelity of the fracture failure models when varying the loading conditions and the effects of a rib fracture failure model on prediction of thoracic injuries have been studied only to a limited extent. Therefore, this study aimed to investigate the effects of three rib failure models on prediction of thoracic injuries using a previously validated finite element model of the human thorax. The performance and biofidelity of each rib failure model were first evaluated by modelling rib responses to different loading conditions in two experimental configurations: (1) the three-point bending on the specimen taken from rib and (2) the anterior–posterior dynamic loading to an entire bony part of the rib. Furthermore, the simulation of the rib failure behaviour in the frontal impact to an entire thorax was conducted at varying velocities and the effects of the failure models were analysed with respect to the severity of rib cage damages. Simulation results demonstrated that the responses of the thorax model are similar to the general trends of the rib fracture responses reported in the experimental literature. However, they also indicated that the accuracy of the rib fracture prediction using a given failure model varies for different loading conditions.     

不同方法修复Pilon骨折的临床疗效比较

目的:比较不同方法修复Pilon骨折的临床疗效。方法:选取我院收治的Pilon骨折患者156例为研究对象,根据手术方法不同,将患者分成研究组和对照组,每组78例。研究组给予分步延期切开复位内固定手术治疗,对照组给予有限内固定结合外固定的手术治疗。观察并比较两组患者的踝关节功能、术中出血量、骨折愈合时间、住院时间以及术后不良反应的发生情况等。结果:与术前比较,两组患者术后踝关节功能均获得改善,且研究组踝关节功能优秀率高于对照组,差异具有统计学意义(P0.05);研究组患者术中出血量、骨折愈合时间、住院时间均明显低于对照组,差异具有统计学意义(P0.05);研究组不良反应发生率低于对照组,差异具有统计学意义(P0.05)。结论:分步延期切开复位内固定手术治疗pilon骨折的临床效果显著,是临床治疗pilon骨折的理想方案。但在临床实践中,应根据患者病情选择合适的治疗方案。     

Influence of the Cytoplasmic Domains of Aquaporin-4 on Water Conduction and Array Formation

Phosphorylation of Ser180 in cytoplasmic loop D has been shown to reduce the water permeability of aquaporin (AQP) 4, the predominant water channel in the brain. However, when the structure of the S180D mutant (AQP4M23S180D), which was generated to mimic phosphorylated Ser180, was determined to 2.8 Å resolution using electron diffraction patterns, it showed no significant differences from the structure of the wild-type channel. High-resolution density maps usually do not resolve protein regions that are only partially ordered, but these can sometimes be seen in lower-resolution density maps calculated from electron micrographs. We therefore used images of two-dimensional crystals and determined the structure of AQP4M23S180D at 10 Å resolution. The features of the 10-Å density map are consistent with those of the previously determined atomic model; in particular, there were no indications of any obstruction near the cytoplasmic pore entrance. In addition, water conductance measurements, both in vitro and in vivo, show the same water permeability for wild-type and mutant AQP4M23, suggesting that the S180D mutation neither reduces water conduction through a conformational change nor reduces water conduction by interacting with a protein that would obstruct the cytoplasmic channel entrance. Finally, the 10-Å map shows a cytoplasmic density in between four adjacent tetramers that most likely represents the association of four N termini. This finding supports the critical role of the N terminus of AQP4 in the stabilization of orthogonal arrays, as well as their interference through lipid modification of cysteine residues in the longer N-terminal isoform.     

Cell wall synthesis in cotton roots after infection with Fusarium oxysporum

Fusarium oxysporum f. sp. vasinfectum penetration hyphae infect living cells in the meristematic zone of cotton (Gossypium barbadense L.) roots. We characterized wall modifications induced by the fungus during infection of the protodermis using antibodies against callose, arabinogalactan-proteins, xyloglucan, pectin, polygalacturonic acid and rhamnogalacturonan I in high-pressure frozen, freeze-substituted root tissue. Using quantitative immunogold labelling we compared the cell walls before and after hyphal contact, cell plates with plasmodesmata during cytokinesis, and wall appositions induced by fungal contact. In the already-existing wall, fungal contact induced only minor modifications such as an increase of xyloglucan epitopes. Wall appositions mostly exhibited epitopes similar to the cell plate except that wall appositions had a much higher callose content. This study shows that wall appositions induced by Fusarium oxysporum hyphae are the result of normal cell wall synthesis and the addition of large amounts of callose. The appositions do not stop fungal growth.     

A random fatigue of mechanize titanium abutment studied with Markoff chain and stochastic finite element formulation

To measure fatigue in dental implants and in its components, it is necessary to use a probabilistic analysis since the randomness in the output depends on a number of parameters (such as fatigue properties of titanium and applied loads, unknown beforehand as they depend on mastication habits). The purpose is to apply a probabilistic approximation in order to predict fatigue life, taking into account the randomness of variables. More accuracy on the results has been obtained by taking into account different load blocks with different amplitudes, as happens with bite forces during the day and allowing us to know how effects have different type of bruxism on the piece analysed.     

A biomechanical comparison of composite femurs and cadaver femurs used in experiments on operated hip fractures

Fourth generation composite femurs (4GCFs, models #3406 and #3403) simulate femurs of males <80 years with good bone quality. Since most hip fractures occur in old women with fragile bones, concern is raised regarding the use of standard 4GCFs in biomechanical experiments. In this study the stability of hip fracture fixations in 4GCFs was compared to human cadaver femurs (HCFs) selected to represent patients with hip fractures.Ten 4GCFs (Sawbones, Pacific Research Laboratories, Inc., Vashon, WA, USA) were compared to 24 HCFs from seven females and five males >60 years. Proximal femur anthropometric measurements were noted. Strain gauge rosettes were attached and femurs were mounted in a hip simulator applying a combined subject-specific axial load and torque. Baseline measurements of resistance to deformation were recorded. Standardized femoral neck fractures were surgically stabilized before the constructs were subjected to 20,000 load-cycles. An optical motion tracking system measured relative movements.Median (95% CI) head fragment migration was 0.8 mm (0.4 to 1.1) in the 4GCF group versus 2.2 mm (1.5 to 4.6) in the cadaver group (p=0.001). This difference in fracture stability could not be explained by observed differences in femoral anthropometry or potential overloading of 4GCFs. 4GCFs failed with fracture-patterns different from those observed in cadavers.To conclude, standard 4GCFs provide unrealistically stable bone-implant constructs and fail with fractures not observed in cadavers. Until a validated osteopenic or osteoporotic composite femur model is provided, standard 4GCFs should only be used when representing the biomechanical properties of young healthy femurs.     

Statistical shape and appearance models for fast and automated estimation of proximal femur fracture load using 2D finite element models

Estimating the risk of osteoporotic fractures is an important diagnostic step that needs to be taken before medicinal treatment. Densitometry-based criteria are normally used in clinical practice for this purpose. However, densitometry-based techniques could not explain all low-energy fractures. As patient-specific finite element (FE) models allow for consideration of other parameters (e.g. load conditions) that are known to be associated with fracture, they are considered promising candidates for more accurate fracture risk estimation. Nevertheless, they are often time consuming, expensive, and complex to build and may need the type of expertise that is not normally available in clinical settings. In this study, we report the development of an automated platform for estimating proximal femur fracture loads using patient-specific 2D FE models generated using dual-energy x-ray absorptiometry (DXA) scans. First, a statistical shape and appearance model (SSAM) is built using DXA scans of patients screened for osteoporosis following a low energy fracture. SSAM is then used together with Active Appearance Models (AAM) for automated segmentation of the proximal femur from new unseen DXA scans. The mean point-to-curve error of the automated procedure, i.e. 1.2–1.4 mm, is shown to be only slightly larger than the intra-observer variability of manual segmentation, i.e. 1.0 mm. Moreover, the developed platform automatically meshes the segmented shape, assigns density-based mechanical properties, assigns loads and boundary conditions, submits the 2D FE model for solution, and performs post-processing of the 2D FE simulation data to determine fracture loads. The fracture loads predicted using the manually generated and automatically generated 2D FE models are shown to be very close with a mean difference of around 8.8%. Repeated measures ANOVA showed no significant differences between the fracture loads calculated using FE models manually generated by three independent observers and those calculated using the automatically generated FE models (p>0.05).     

道路交通事故致胫腓骨骨折的特点及救治

目的:总结交通事故伤中胫腓骨骨折的流行病学分类、特点及救治注意事项。方法:对136例交通事故伤中胫腓骨骨折患者的临床资料进行回顾性分析。结果:交通事故致胫腓骨骨折以多发伤及复合伤多见,经早期彻底清创、恰当的骨折固定、抗生素应用等,治愈77例,截肢2例,伤口浅表感染6例,骨髓炎1例。结论:交通事故伤中胫腓骨骨折大多伤情严重,感染率高,且开放性居多,早期及时选择合适的治疗方法是取得良好预后的关键。