Using a dry electrode EEG device during balance tasks in healthy young-adult males: Test–retest reliability analysis

Abstract

Background: The analysis of brain activity during balance is an important topic in different fields of science. Given that all measurements involve an error that is caused by different agents, like the instrument, the researcher, or the natural human variability, a test–retest reliability evaluation of the electroencephalographic assessment is a needed starting point. However, there is a lack of information about the reliability of electroencephalographic measurements, especially in a new wireless device with dry electrodes.

Objective: The current study aims to analyze the reliability of electroencephalographic measurements from a wireless device using dry electrodes during two different balance tests.

Method: Seventeen healthy male volunteers performed two different static balance tasks on a Biodex Balance Platform: (a) with two feet on the platform and (b) with one foot on the platform. Electroencephalographic data was recorded using Enobio (Neuroelectrics). The mean power spectrum of the alpha band of the central and frontal channels was calculated. Relative and absolute indices of reliability were also calculated.

Results: In general terms, the intraclass correlation coefficient (ICC) values of all the assessed channels can be classified as excellent (>0.90). The percentage standard error of measurement oscillated from 0.54% to 1.02% and the percentage smallest real difference ranged from 1.50% to 2.82%.

Conclusion: Electroencephalographic assessment through an Enobio device during balance tasks has an excellent reliability. However, its utility was not demonstrated because responsiveness was not assessed.     

Selective Labeling of [3H]2-Deoxy-d-Glucose in the Snake Trigeminal System: Basal and Infrared-Stimulated Conditions

[³H]2-Deoxy-d-glucose (2-DG) and high-resolution autoradiography were employed to investigate labeling patterns of the trigeminal and infrared sensory system in acrotaline snake, the pit viper (Trimeresurus flavoviridis). Following intracardiac injection of 9.25 MBq [³H]2-DG, neurons in the nucleus of the lateral descending trigeminal tract (LTTD), nucleus reticularis caloris (RC), nucleus trigemini mesencephalicus, nucleus trigemini motorius, and trigeminal ganglia were labeled in various degrees after the pit organ had been removed (basal condition). This revealed that a higher rate of glucose utilization occurred in these nuclei than in the common sensory trigeminal nuclei, which lacked labeling entirely. When a pit was stimulated periodically with an infrared stimulus for 45 min, the difference in percentage of labeled cells was ipsilaterally increased by 12.84% in large cells of the LITD and by 7.55% in the RC, as compared with the contralateral, basal-condition side. These slight changes indicate a small increase of glucose consumption during infrared reception. On the other hand, the small cells in the LTTD showed labeling that did not change with stimulation, suggesting that 2-DG uptake in inhibitory interneurons is relatively constant.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

Formation of Hydroxysulphate Green Rust 2 as a Single Iron(II-III) Mineral in Microbial Culture

Although GR2(SO₄ ^2-) can be easily formed by abiotic synthesis, the biotic formation of hydroxysulphate as a single iron(II-III) mineral in microbial culture and its characterization was not achieved. This study was carried out to investigate the sole formation of GR2(SO₄ ^2-) during the reduction of γ-FeOOH by a dissimilatory iron-respiring bacterium, Shewanella putrefaciens CIP 8040^T. Reduction experiments were performed in a non-buffered medium devoid of organic compounds, with 25 mM of sulphate and with a range of lepidocrocite concentrations with H₂ as the electron donor under nongrowth conditions. The resulting biogenic solids, after iron-respiring activity, were characterized by X-ray diffraction (XRD), transmission Mössbauer spectroscopy (TMS) and electron microscopy (SEM and TEM). The sulphate has been identified as the intercalated anion by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). In addition, the structure of this sulphate anion was discussed. Our experimental study demonstrated that, under H₂ atmosphere, the biogenic solid was a GR2(SO₄ ^2-), as the sole iron(II-III) bearing mineral, whatever the initial lepidocrocite concentration. The crystals of the biotically formed GR2(SO₄ ^2-) are significantly larger than those observed for GR2(SO₄ ^2-) obtained through abiotic preparation, < 15 μ m diameter as against 0.5–4 μm, respectively.     

Competitive Formation of Hydroxycarbonate Green Rust 1 versus Hydroxysulphate Green Rust 2 in Shewanella putrefaciens Cultures

The formation of hydroxysulphate green rust 2, a Fe(II-III) compound commonly found during corrosion processes of iron-based materials in seawater, has not yet been reported in bacterial cultures. Here we used Shewanella putrefaciens, a dissimilatory iron-reducing bacterium to anaerobically catalyze the transformation of a ferric oxyhydroxide, lepidocrocite (γ-FeOOH), into Fe(II) in the presence of various sulphate concentrations. Biotransformation assays of γ-FeOOH were performed with formate as the electron donor under a variety of concentrations. The results showed that the competitive formation of hydroxycarbonate green rust 1 (GR1(CO₃ ^2?)) and hydroxysulphate green rust 2 (GR2(SO₄ ^{2 ?})) depended upon the relative ratio (R) of bicarbonate and sulphate concentrations. When R ≥ 0.17, GR1(CO₃ ^{2 ?}) only was formed whereas when R < 0.17, a mixture of GR2(SO₄ ^{2 ?}) and GR1(CO₃ ^{2 ?}) was obtained. These results demonstrated that the hydroxysulphate GR2 can originate from the microbial reduction of γ-FeOOH and confirmed the preference for carbonate over sulphate during green rust precipitation. The solid phases were characterized by X-ray diffraction, transmission Mössbauer spectroscopy and scanning electron microscopy. Diffuse reflectance infrared Fourier transform spectroscopy confirmed the presence of intercalated carbonate and sulphate in green rust's structure. This study sheds light on the influence of dissimilatory iron-reducing bacteria on microbiologically influenced corrosion.     

Acyl Transfer from Membrane Lipids to Peptides Is a Generic Process

The generality of acyl transfer from phospholipids to membrane-active peptides has been probed using liquid chromatography–mass spectrometry analysis of peptide–lipid mixtures. The peptides examined include melittin, magainin II, PGLa, LAK1, LAK3 and penetratin. Peptides were added to liposomes with membrane lipid compositions ranging from pure phosphatidylcholine (PC) to mixtures of PC with phosphatidylethanolamine, phosphatidylserine or phosphatidylglycerol. Experiments were typically conducted at pH 7.4 at modest salt concentrations (90 mM NaCl). In favorable cases, lipidated peptides were further characterized by tandem mass spectrometry methods to determine the sites of acylation. Melittin and magainin II were the most reactive peptides, with significant acyl transfer detected under all conditions and membrane compositions. Both peptides were lipidated at the N-terminus by transfer from PC, phosphatidylethanolamine, phosphatidylserine or phosphatidylglycerol, as well as at internal sites: lysine for melittin; serine and lysine for magainin II. Acyl transfer could be detected within 3 h of melittin addition to negatively charged membranes. The other peptides were less reactive, but for each peptide, acylation was found to occur in at least one of the conditions examined. The data demonstrate that acyl transfer is a generic process for peptides bound to membranes composed of diacylglycerophospholipids. Phospholipid membranes cannot therefore be considered as chemically inert toward peptides and by extension proteins.     

Fibrillar seeds alleviate amyloid-β cytotoxicity by omitting formation of higher-molecular-weight oligomers

Amyloid-β (Aβ) peptides can exist in distinct forms including monomers, oligomers and fibrils, consisting of increased numbers of monomeric units. Among these, Aβ oligomers are implicated as the primary toxic species as pointed by multiple lines of evidence. It has been suggested that toxicity could be rendered by the soluble higher-molecular-weight (high-n) Aβ oligomers. Yet, the most culpable form in the pathogenesis of Alzheimer’s disease (AD) remains elusive. Moreover, the potential interaction among the insoluble fibrils that have been excluded from the responsible aggregates in AD development, Aβ monomers and high-n oligomers is undetermined. Here, we report that insoluble Aβ fibrillar seeds can interact with Aβ monomers at the stoichiometry of 1:2 (namely, each Aβ molecule of seed can bind to two Aβ monomers at a time) facilitating the fibrillization by omitting the otherwise mandatory formation of the toxic high-n oligomers during the fibril maturation. As a result, the addition of exogenous Aβ fibrillar seeds is seen to rescue neuronal cells from Aβ cytotoxicity presumably exerted by high-n oligomers, suggesting an unexpected protective role of Aβ fibrillar seeds.     

Structure of native oligomeric Sprouty2 by electron microscopy and its property of electroconductivity

Receptor tyrosine kinases (RTKs) regulate many cellular processes, and Sprouty2 (Spry2) is known as an important regulator of RTK signaling pathways. Therefore, it is worth investigating the properties of Spry2 in more detail. In this study, we found that Spry2 is able to self-assemble into oligomers with a high-affinity KD value of approximately 16 nM, as determined through BIAcore surface plasmon resonance analysis. The three-dimensional (3D) structure of Spry2 was resolved using an electron microscopy (EM) single-particle reconstruction approach, which revealed that Spry2 is donut-shaped with two lip-cover domains. Furthermore, the method of energy dispersive spectrum obtained through EM was analyzed to determine the elements carried by Spry2, and the results demonstrated that Spry2 is a silicon- and iron-containing protein. The silicon may contribute to the electroconductivity of Spry2, and this property exhibits a concentration-dependent feature. This study provides the first report of a silicon- and iron-containing protein, and its 3D structure may allow us (1) to study the potential mechanism through the signal transduction is controlled by switching the electronic transfer on or off and (2) to develop a new type of conductor or even semiconductor using biological or half-biological hybrid materials in the future.     

Botanical affinity of pollen harvested by Apis mellifera L. in a semi-arid area from Bahia,Brazil

We analysed the botanical composition of pollen harvested by Apis mellifera L. in the Canudos Biological Station, Bahia, Brazil, and the influence of climatic factors on pollen sample composition was assessed. Forty-six pollen types were identified belonging to species occurring in the study area. The family Leguminosae was of significant importance amongst the samples, represented by ten pollen types. Diodia radula, Rhaphiodon echinus, and Mimosa misera pollen types occurred most constantly among the samples. We observed that isolated pollen class characterises samples analysed. It was also observed that pollen type richness is directly linked to rainfall, reflecting the strong influence of this climatic parameter on flowering intensity, and thus on the ability of the bees to obtain food resources.     

Air and surface soil samples – two different pairs of shoes? Comparing the pollen spectrum on different days of the pollen season

The pollen spectra of air and surface soil samples from a rooftop (at 14 m) and from ground level (at 1.6 m) in the suburbs of Vienna (Austria) were compared. Two soil samples and two air samples were taken on four different days to account for possible differences: in winter when no pollination occurred (reference day), in spring during the main flowering of Betula (birch day), in spring/summer during the main flowering of Poaceae (grass day), and in autumn during the main flowering of Ambrosia (ragweed day). Thirty-five different pollen types were used to describe the pollen spectra. Frequencies of certain pollen types reflect a seasonal impact on both the surface soil and air samples and show a similarity between air and soil samples on most of the days. However, the seasonal impact is higher in the air samples and shows a high consistency for ground and rooftop level. Kendall’s tau correlation coefficients further substantiate the similarities of the samples especially for the pollen season days. Exceptions include the winter day when pollination was low and the air samples recorded nearly no pollen at all, and the ragweed day when Ambrosia pollen was abundant in three of four samples but not in the ground surface soil sample. Thus, (1) air and surface pollen samples record similar signals during the pollen season but not during the ragweed and winter season and (2) air and surface pollen samples show the impact of local vegetation also in pollen traps located at different heights.