秸秆分层多级转化液体燃料新工艺的研究进展

目前,秸秆主要作为性质单一组分的纤维素原料而采用生物转化法或快速热解法加以利用。生物转化法主要利用纤维素,而利用木质素和半纤维素较困难;快速热解生物质又使部分组分低值利用,而且得到的生物油品质低。为解决单一的生物或热转化方式存在的问题,提出秸秆分层多级转化液体燃料的新构思,即以秸秆“组分分离、分级定向转化”为核心,将生物转化和热转化有机结合多级转化生产燃料酒精与生物油。研究结果表明,秸秆经过汽爆处理后,采用高浓度发酵一分离乙醇耦合系统,可降低纤维素酶用量,提高了纤维素酶解效率,而且简化操作过程,使蒸馏前乙醇浓度达到60％以上。发酵乙醇剩余物再经热解后,不但热解温度较原秸秆明显降低,而且所得生物油品质有了明显改观。     

CuS Microspheres with Tunable Interlayer Space and Micropore as a High‐Rate and Long‐Life Anode for Sodium‐Ion Batteries

Layered transition metal sulfides (LTMSs) have tremendous commercial potential in anode materials for sodium‐ion batteries (SIBs) in large‐scale energy storage application. However, it is a great challenge for most LTMS electrodes to have long cycling life and high‐rate capability due to their larger volume expansion and the formation of soluble polysulfide intermediates caused by the conversion reaction. Herein, layered CuS microspheres with tunable interlayer space and pore volumes are reported through a cost‐effective interaction method using a cationic surfactant of cetyltrimethyl ammonium bromide (CTAB). The CuS–CTAB microsphere as an anode for SIBs reveals a high reversible capacity of 684.6 mAh g^?1 at 0.1 A g^?1, and 312.5 mAh g^?1 at 10 A g^?1 after 1000 cycles with high capacity retention of 90.6%. The excellent electrochemical performance is attributed to the unique structure of this material, and a high pseudocapacitive contribution ensures its high‐rate performance. Moreover, in situ X‐ray diffraction is applied to investigate their sodium storage mechanism. It is found that the long chain CTAB in the CuS provides buffer space, traps polysulfides, and restrains the further growth of Cu particles during the conversion reaction process that ensure the long cycling stability and high reversibility of the electrode material.     

Relationships between biovolume and carbon and nitrogen content of bacterioplankton

Abstract Cell volume, carbon and nitrogen content were determined for bacteria grown in batch cultures in water samples collected at five localities in western Florida, USA. Cultures were set up by inoculating 0.2 μm filtered water with 2.5 to 7.0% of 1.0 μm filtered water. Biovolumes of the bacteria were measured by epifluorescence photomicrography. Bacterial carbon and nitrogen contents were determined with a CHN analyser. During incubations, bacterial volumes doubled from 0.070±0.037 μ m³(mean ± S.E.) to 0.153 ± 0.036 μ m³ at early stationary phase. Bacterial C:N ratios ranged between 2.8 and 10.3, with a mean of 6.5, and were inversely correlated with cell volumes. Conversion factors for volume to carbon and nitrogen content were relatively high and variable, ranging from 0.21 to 161 pg C μm⁻³ (mean: 0.72 pg C μm⁻³) and from 0.05 to 0.25 pg N μm⁻³ (mean: 0.12 pg N μm⁻³). Small cells contained more C and N per unit volume than did large cells. The data suggested that biovolume to biomass conversion factors may be higher than previously thought and may be highly variable both temporally and geographically.     

Rational Structure Optimized Hybrid Nanogenerator for Highly Efficient Water Wave Energy Harvesting

Water wave energy is a promising renewable energy source that may alleviate the rising concerns over current resource depletion, but it is rarely exploited due to the lack of efficient energy harvesting technologies. In this work, a hybrid system with a triboelectric nanogenerator (TENG) and an electromagnetic generator (EMG) based on an optimized inner topological structure is reported to effectively harvest water wave energy. The TENG with etched polytetrafluoroethylene films and Cu electrodes utilizing the contact‐freestanding mode is designed into a cubic structure, in which the EMG is well hybridized. An integration of TENG and EMG achieves mutual compensation of their own merits, enabling the hybrid system to deliver satisfactory output over a broad range of operation frequency. The output performance of TENG with varied inner topological structures is experimentally and theoretically compared, and a concept is proposed to further clarify the energy conversion efficiency, which should be considered in designing energy harvesting devices. The influences of oscillation frequency, amplitude, and dielectric materials on the output performance of the hybrid system are comprehensively studied on different platforms. Furthermore, the optimum operation frequency ranges for TENG and EMG are concluded. The proposed hybrid nanogenerator renders an effective approach toward large‐scale blue energy harvesting over a broad frequency range.     

Insights into the Effects of Electrolyte Composition on the Performance and Stability of FeF2 Conversion‐Type Cathodes

As an alternative to commercial Ni‐ and Co‐based intercalation‐type cathode materials, conversion‐type metal fluoride (MF_x) cathodes are attracting more interest due to their promises to increase cell‐level energy density when coupled with lithium (Li) or silicon (Si)‐based anodes. Among metal fluorides, iron fluorides (FeF₂ and FeF₃) are regarded as some of the most promising candidates due to their high capacity, moderately high potential and the very low cost of Fe. In this study, the impacts of electrolyte composition on the performance and stability of nanostructured FeF₂ cathodes are systematically investigated. Dramatic impacts of Li salt composition, Li salt concentration, solvent composition, and cycling potential range on the cathode's most critical performance parameters—stability, capacity, rate, and voltage hysteresis are discovered. In contrast to previous beliefs, it is observed that even if the Fe²⁺ cation dissolution could be avoided, the dissolution of F^? anions may still negatively affect cathode performance. Formation of the more favorable cathode solid electrolyte interface (CEI) is found to minimize both processes.     

Melanin–Perovskite Composites for Photothermal Conversion

Biomacromolecular pigments, such as melanin, play an essential role in the survival of all living beings. Melanin absorbs sunlight and transforms it into heat, which is crucial for avoiding damage to skin cells. Light absorption produces excited electrons, which could either fall back to ground states by releasing the heat (photothermal effect) and/or light (photoluminescence), or stay at higher energy levels within its lifetime period, which can be captured through external electronic circuitry (photovoltaic effect). In this study, it is demonstrated that the combination of melanin with halide perovskite light absorber in the form of a composite exhibits high absorbance from the UV to NIR region in the solar spectrum. And the composite displays significantly reduced photoluminescence and minimized density of residual excited states (verified by photovoltaic measurement) owing to the significantly enhanced nonradiant quenching by the melanin. As a result, the composite shows an ultrahigh solar‐thermal quantum yield of 99.56% and solar‐thermal conversion efficiency of ≈81% under one‐sun illumination (AM1.5), which is superior to typical carbon materials such as graphene (≈70%). By coating the photothermal composite film on the hot‐side of thermoelectric devices, a 7000% increase in output power as compared to the blank device under illumination is observed.