Isolation of Avian Trypanosomes by Selective Centrifugation and Subsequent Processing for Electron Microscopy

Paraffin sections are usually rehydrated before staining. It is possible to apply aqueous dye solutions without first removing the wax. Staining then occurs more slowly, and only if the embedding medium has not melted or become unduly soft after catting. To avoid this problem, sections are flattened on water no hotter than 45 C and dried overnight at 40 C. Minor technical modifications to the staining procedures are needed. Mercury deposits are removed by iodine, and a 3% solution of sodium thiosnlfate in 60% ethanol is used to remove the iodine from paraffin sections. At room temperature, progressive staining takes 10–20 tunes longer for sections in paraffin than for hydrated sections; at 45 C, this can be shortened to about three times the regular staining time. After staining, the slides are rinsed in water, air dried, dewaxed with xylene, and coverslipped in the usual way. Nuclear staining in the presence of wax was achieved with toluidine blue, O, alum-hematoxylin and Weigert's iron-hematoxylin. Eosin and van Gieson's picric acid-acid fuchsine were effective anionic counterstains. A one-step trichrome mixture containing 3 anionic dyes and phosphomolybdic acid was unsuitable for sections in wax because it Imparted colors that were nninformative and quite different from those obtained with hydrated sections. Advantages of staining in the presence of wax include economy of solvents, reduced risk of overstaining and strong adhesion of sections to slides.     

Modeling and optimization of lipase-catalyzed esterification of policosanols with conjugated linoleic acid by response surface methodology

Abstract

The aim of this study was to model the lipase-catalyzed esterification of policosanols with conjugated linoleic acid (CLA) in a solvent-free system to produce wax esters which had a lower melting point than that of their corresponding policosanol forms and to optimize the reaction conditions by response surface methodology (RSM). Novozym 435 was selected as a suitable biocatalyst for the reaction. The molar ratio of substrates (policosanols to CLA) was 1:2. A well-fitting quadratic polynomial regression model for the degree of esterification (DE) of policosanols with CLA was established with regard to temperature (35–65°C), enzyme loading (1–5% of weight of total substrates), and reaction time (10–50 min). Optimal reaction conditions were 61.3°C for temperature, 3.7% for enzyme loading, and 34.1 min for reaction time, and the DE was ? 95 mol% under these conditions. The policosanols and wax esters synthesized under optimal conditions had melting points of 79°C and 57°C, respectively.     

Role of cuticular lipids and water-soluble compounds in tick susceptibility to Metarhizium infection

The arthropod cuticle acts as a physiochemical barrier protecting the organism from pathogens' entry. Entomopathogenic fungi actively penetrate the cuticles of arthropod hosts and are therefore directly affected by cuticle composition. Previously we have observed that Metarhizium spp. developing on resistant ticks ultimately die without penetrating tick's cuticle, suggesting that the cuticles of resistant ticks have antifungal compounds. In the present study, lipids and water-soluble cuticular components were extracted from engorged female tick cuticles, of one susceptible and one resistant tick species to Metarhizium spp. While conidia exposed to lipids from the susceptible tick, Rhipicephalus annulatus, germinated and differentiated into appressorium, conidia exposed to lipids from the resistant tick, Hyalomma excavatum, were inhibited. Soluble cuticular component extracts from both susceptible and resistant ticks stimulated conidial germination but not appressorium differentiation. A comparative analysis of the fatty acid profile in lipid extract of each tick exhibited similar compositions, but the relative abundance of C16:0, C18:0, C18:1ω9C and C20:0 was 2–5 times higher in the extracts from resistant ticks. All of these fatty acids inhibited conidial germination in vitro at 1% and 0.1% w/v concentration, but C20:0 stimulated appressorium differentiation at low concentration. This is the first report demonstrating a possible link between the presence of antifungal compounds in a specific concentration in tick cuticle and tick resistance to infection.     

Diethyl‐Ether Flower Washings of Dianthus cruentus Griseb. (Caryophyllaceae): Derivatization Reactions Leading to the Identification of New Wax Constituents

Some carnation species (Dianthus spp., Caryophyllaceae) exhibit a strong resistance to drought stress that is connected with the increased surface wax formation. Wax composition is unknown for the majority of Dianthus spp. Herein, mass spectral and gas chromatographic data, in combination with synthesis and chemical transformations (transesterification and synthesis of dimethyl disulfide adducts), enabled the identification of 151 constituents of diethyl‐ether washings of fresh flowers of Dianthus cruentus Griseb . from Serbia. The flower wax contained, along with the dominant ubiquitous long‐chain n‐alkanes, homologous series of n‐ and branched (iso‐ and anteiso‐) long‐chain hexyl alkanoates/alkenoates and alkyl/alkenyl benzoates. The branching position in the mentioned hexyl esters was probed by synthesis of esters of three isomeric hexanols that were spectrally characterized (¹H‐ and ¹³C‐NMR, IR, MS). The washings also contained long‐chain (Z)‐ and (E)‐alkenes (C₂₃?C₃₅) with several different double bond regiochemistries. Fifty‐five of these constituents (eight hexyl esters, two benzoates, and forty‐five alkenes) were detected for the first time in Plantae, while ten of these represent completely new compounds. The rare occurrence of these wax constituents makes them possible chemotaxonomic markers of this particular Dianthus sp.     

Surface wax esters contribute to drought tolerance in Arabidopsis

Waxes are components of the cuticle covering the aerial organs of plants. Accumulation of waxes has previously been associated with protection against water loss, therefore contributing to drought tolerance. However, not much information is known about the function of individual wax components during water deficit. We studied the role of wax ester synthesis during drought. The wax ester load on Arabidopsis leaves and stems was increased during water deficiency. Expression of three genes, WSD1, WSD6 and WSD7 of the wax ester synthase/diacylglycerol acyltransferase (WS/DGAT or WSD) family was induced during drought, salt stress and abscisic acid treatment. WSD1 has previously been identified as the major wax ester synthase of stems. wsd1 mutants have shown reduced wax ester coverage on leaves and stems during normal or drought condition, while wax ester loads of wsd6, wsd7 and of the wsd6wsd7 double mutant were unchanged. The growth and relative water content of wsd1 plants were compromised during drought, while leaf water loss of wsd1 was increased. Enzyme assays with recombinant proteins expressed in insect cells revealed that WSD6 and WSD7 contain wax ester synthase activity, albeit with different substrate specificity compared with WSD1. WSD6 and WSD7 localize to the endoplasmic reticulum (ER)/Golgi. These results demonstrated that WSD1 is involved in the accumulation of wax esters during drought, while WSD6 and WSD7 might play other specific roles in wax ester metabolism during stress.     

Leaf wax n‐alkane patterns of six tropical montane tree species show species‐specific environmental response

It remains poorly understood how the composition of leaf wax n‐alkanes reflects the local environment. This knowledge gap inhibits the interpretation of plant responses to the environment at the community level and, by extension, inhibits the applicability of n‐alkane patterns as a proxy for past environments. Here, we studied the n‐alkane patterns of five Miconia species and one Guarea species, in the Ecuadorian Andes (653–3,507 m a.s.l.). We tested for species‐specific responses in the average chain length (ACL), the C₃₁/(C₃₁ + C₂₉) ratio (ratio), and individual odd n‐alkane chain lengths across an altitudinally driven environmental gradient (mean annual temperature, mean annual relative air humidity, and mean annual precipitation). We found significant correlations between the environmental gradients and species‐specific ACL and ratio, but with varying magnitude and direction. We found that the n‐alkane patterns are species‐specific at the individual chain length level, which could explain the high variance in metrics like ACL and ratio. Although we find species‐specific sensitivity and responses in leaf n‐alkanes, we also find a general decrease in “shorter” (<C₂₉) and an increase in “longer” (>C₃₁) chain lengths with the environmental gradients, most strongly with temperature, suggesting n‐alkanes are useful for reconstructing past environments.     

Wax removal for accelerated cotton scouring with alkaline pectinase

A rational approach has been applied to design a new environmentally acceptable and industrially viable enzymatic scouring process. Owing to the substrate specificity, the selection of enzymes depends on the structure and composition of the substrate, i.e. cotton fibre. The structure and composition of the outer layers of cotton fibre has been established on the basis of thorough literature study, which identifies wax and pectin removal to be the key steps for successful scouring process. Three main issues are discussed here, i.e. benchmarking of the existing alkaline scouring process, an evaluation of several selected acidic and alkaline pectinases for scouring, and the effect of wax removal treatment on pectinase performance. It has been found that the pectinolytic capability of alkaline pectinases on cotton pectin is nearly 75% higher than that of acidic pectinases. It is concluded that an efficient wax removal prior to pectinase treatment indeed results in improved performance in terms of hydrophilicity and pectin removal. To evaluate the hydrophilicity, the structural contact angle (theta) was measured using an auto-porosimeter.     

The reproduction potentials of four entomopathogenic nematode strains related to cost-effective production for biological control

Bioassays to evaluate the mortality, virulence and reproduction potentials of four indigenous EPN strains, S-PQ16, S-BM12, H-KT3987 and H-CB3452 on insect larvae of mealworm (Tenebrio molitor) and greater wax moth (Galleria mellonella) revealed the highest mortality rates of two insect larvae at the highest inoculation dose of 100 IJs to range from 89 to 100 percent and 94.3–100 percent at 48 h after inoculation, respectively. Virulence was high for all nematode strains, with LC₅₀ values between 29.6 and 47.3 IJs/insect host. The highest IJ yields were different between nematode strains and insect host, from 66.8 × 10³ IJs (S-PQ16) to 118.6 × 10³ IJs (H-KT3987) on T. molitor, and from 54.2 × 10³ IJs (S-BM12) to 163.3 × 10³ IJs (H-KT3987) on G. mellonella. The culturing cost in terms of food expenditure for rearing insect larvae varied between insect larvae and nematode strains, from 6.76 to 26.63 USD per billion IJs for nematode strains cultured on T. molitor larvae and from 3.54 to 7.81 USD per billion IJs for nematode strains cultured on G. mellonella larvae. The full cost for a nematode product of 2.5 × 10⁹ IJs per hectare, produced through in vivo mass culturing, of the most efficient nematode strain, H-KT3987, was 191.3 USD, slightly cheaper than 199.4 USD for the same nematode product produced through in vitro mass culturing.     

Season‐long mating disruption of citrus leafminer,Phyllocnistis citrella Stainton,with an emulsified wax formulation of pheromone

The citrus leafminer, Phyllocnistis citrella Stainton (Lepidoptera: Gracillariidae), is a major worldwide pest of citrus. Larval feeding by this insect facilitates proliferation of citrus bacterial canker, Xanthomonas axonopodis pv. citri. Herein, we describe a season‐long disruption trial of P. citrella with a newly developed, emulsified wax dispenser of pheromone (SPLAT‐CLM^TM). A formulation containing a 3 : 1 blend of (Z,Z,E)‐7,11,13‐hexadecatrienal:(Z,Z)‐7,11‐hexadecadienal at a 0.2% loading rate of active ingredient by weight and deployed twice per season (24 weeks total) at 490 g of formulation/ha caused season‐long disruption of male moth catch in pheromone traps as well as reduced leaf infestation. Analysis of pheromone release from dispensers by gas chromatography revealed that effective disruption of P. citrella occurred at a deployment rate of 126 μg of (Z,Z,E)‐7,11,13‐hexadecatrienal/ha/h. Direct observation of moth behaviour in the field suggested that disruption by this formulation occurred by a non‐competitive mechanism. A formulation of the 3 : 1 attractive blend at a 0.02% pheromone loading rate caused only 2–6 weeks of disruption per deployment and did not reduce leaf infestation during mid and end of the season evaluations. A formulation containing 0.2% of (Z,Z)‐7,11‐hexadecadienal alone and deployed at 490 g/ha caused 6–7 weeks of moth disruption to pheromone traps and did not prevent leaf infestation, while an identical formulation loaded with 0.02% (w/w) of (Z,Z)‐7,11‐hexadecadienal alone had no effect on P. citrella orientation to pheromone traps. The SPLAT formulation evaluated herein appears to be an excellent release device for (Z,Z,E)‐7,11,13‐hexadecatrienal given that approximately 100 days of steady release occurred following an initial brief (ca. 7 days) burst of higher release. The advantages of SPLAT as a formulation for P. citrella disruption include low cost of manufacturing, biodegradable and weather resistant characteristics, and flowability allowing machine application. Mating disruption should be an effective alternative to insecticides for management of P. citrella and may reduce the incidence of citrus canker.