Superior Oxygen Reduction Reaction on Phosphorus‐Doped Carbon Dot/Graphene Aerogel for All‐Solid‐State Flexible Al–Air Batteries

Carbon dots have been recognized as one of the most promising candidates for the oxygen reduction reaction (ORR) in alkaline media. However, the desired ORR performance in metal–air batteries is often limited by the moderate electrocatalytic activity and the lack of a method to realize good dispersion. To address these issues, herein a biomass‐deriving method is reported to achieve the in situ phosphorus doping (P‐doping) of carbon dots and their simultaneous decoration onto graphene matrix. The resultant product, namely P‐doped carbon dot/graphene (P‐CD/G) nanocomposites, can reach an ultrahigh P‐doping level for carbon nanomaterials. The P‐CD/G nanocomposites are found to exhibit excellent ORR activity, which is highly comparable to the commercial Pt/C catalysts. When used as the cathode materials for a primary liquid Al–air battery, the device shows an impressive power density of 157.3 mW cm^?2 (comparing to 151.5 mW cm^?2 of a similar Pt/C battery). Finally, an all‐solid‐state flexible Al–air battery is designed and fabricated based on our new nanocomposites. The device exhibits a stable discharge voltage of ≈1.2 V upon different bending states. This study introduces a unique biomass‐derived material system to replace the noble metal catalysts for future portable and wearable electronic devices.     

松籽油的干式酶法提取工艺优化与理化性质分析

应用单因素实验设计对干式酶法松籽油提取工艺进行优化。结果表明,干式酶法提取松籽油最佳制备工艺为：0.2%淀粉酶、料液比为6：1、酶解温度为55℃、酶解时间为8 h,所得最大出油率为90.2%,残油率为6.2%。经检测最佳制备条件提取的松籽油不饱和脂肪酸的含量为90.09%,其中油酸含量为26.84%,介酸含量为2.41%、亚油酸含量为46.25%、皮诺敛酸为14.59%;饱和脂肪酸中棕榈酸含量为6.5%、硬脂酸为3.41%。松籽油酸价为2.61 mg·g^-1、过氧化值为1.56 mmol·kg^-1、丙二醛含量为0.41 mg·kg^-1。所有检测结果均高于《中华人民共和国粮食行业标准LS/T 3242-2014》松籽油中质量标准的要求。     

Photoluminescence and piezoelectric behaviour of Y2Zr2O7 pyrochlore‐based multifunctional materials and the influence of Eu3+ and Sm3+

Y₂Zr₂O₇‐doped with Eu³⁺ and Sm³⁺ phosphors were prepared for the first time as multifunctional smart materials using a solid‐state reaction method at 1400^oC. Thermal behaviour, crystal structure, surface morphology, and elemental analysis were characterized using thermogravimetric (TG) and differential thermal (DTA) analyses, X‐ray diffraction (XRD) and scanning electron microscope equipped with energy‐dispersive X‐ray spectroscopy (SEM‐EDX). Experimental results revealed that both phosphors have a pyrochlore structure with a cubic crystal system. Photoluminescence properties were also measured and red emission was observed from Y_1.90Eu_0.10Zr₂O₇ and Y_1.90Sm_0.10Zr₂O₇ phosphors. Dielectric constant, loss tangent, piezoelectric charge constant, and Curie temperature of all the samples were determined using an LCR‐meter, d₃₃‐meter, and TG/DTA. Eu doping in Y₂Zr₂O₇ resulted in a high dielectric constant (9.61) and low loss tangent (1.67%) values, whereas high piezoelectric charge constant (0.68 pC/N) and high Curie temperature (820°C) could be obtained using Sm‐doped Y₂Zr₂O₇.     

Impact of lung density on isolated lung tumor dose in VMAT using inline MR-Linac

PurposeThis study investigated the impact of lung density on the isolated lung tumor dose for volumetric modulated arc therapy (VMAT) in an inline magnetic resonance linear accelerator (MR-Linac) using the Monte Carlo (MC) simulation.MethodsCT images of the thorax phantoms with lung tumors of 1, 2, and 3 cm diameters were converted into voxel-base phantoms with lung densities of 0.1, 0.2, and 0.3 g/cm³, respectively. The dose distributions were calculated for partial-arc VMAT. The dose distributions were compared using dose differences, dose volume histograms, and dose volume indices.ResultsIn all cases, the inline magnetic field significantly enhanced the lung tumor dose compared to that at 0 T. For the 1 cm lung tumor, the inline magnetic field of 1 T increased the minimum dose of 95% of the Planning target volume (PTV D₉₅) by 14.0% in 0.1 g/cm³ lung density as compared to that in 0.3 g/cm³ at 0 T. In contrast, at 0 and 0.5 T, the PTV D₉₅ in 0.3 g/cm³ lung density was larger than that in lung density of 0.1 g/cm³. For the 2 cm lung tumor, a similar tendency to 1 cm was observed, whereas the dose impact of lung density was smaller than that for 1 cm. For the 3 cm lung tumor, the lung tumor dose was independent of lung density at 0.5 T and 1.0 T.ConclusionThe inline MR-Linac with the magnetic field over 1 T can enhance the PTV D₉₅ for VMAT regardless of the lung density.     

Improving the aqueous solubility of HCV‐E2 glycoprotein epitope mimics by cyclization using POLAR hinges

In this research we describe the improvement of the water‐solubility of cyclic epitope mimics based on the HCV E2 glycoprotein by incorporation of suitable polar hinges. The poor solubility of epitope mimics based on peptide sequences in the envelope (E2) protein hampered their synthesis and purification and made it very difficult to prepare the molecular constructs for evaluation of their bioactivity. Since changes in the amino acid composition are hardly possible in these epitope mimics in order to increase water‐solubility, a polar cyclization hinge may offer a remedy leading to a significant increase of polarity and therefore water solubility. These polar hinges were applied in the synthesis of better water‐soluble HCV‐E2 epitopes. An azide functionality in the polar hinges allowed attachment of a tetraethylene glycol linker by Cu‐catalyzed azide‐alkyne cyclo‐addition (CuAAC) for a convenient conjugation to ELISA plates in order to evaluate the bio‐activity of the epitope mimics. The immunoassays showed that the use of more polar cyclization hinges still supported anti‐HCV antibody recognition and did not negatively influence their binding. This significantly increased solubility induced by polar hinges should therefore allow for the molecular construction and ultimate evaluation of synthetic vaccine molecules.     

Multiple trade‐offs regulate the effects of woody plant removal on biodiversity and ecosystem functions in global rangelands

Woody plant encroachment is a major land management issue. Woody removal often aims to restore the original grassy ecosystem, but few studies have assessed the role of woody removal on ecosystem functions and biodiversity at global scales. We collected data from 140 global studies and evaluated how different woody plant removal methods affected biodiversity (plant and animal diversity) and ecosystem functions (plant production, hydrological function, soil carbon) across global rangelands. Our results indicate that the impact of removal is strongly context dependent, varying with the specific response variable, removal method, and traits of the target species. Over all treatments, woody plant removal increased grass biomass and total groundstorey diversity. Physical and chemical removal methods increased grass biomass and total groundstorey biomass (i.e., non‐woody plants, including grass biomass), but burning reduced animal diversity. The impact of different treatment methods declined with time since removal, particularly for total groundstorey biomass. Removing pyramid‐shaped woody plants increased total groundstorey biomass and hydrological function but reduced total groundstorey diversity. Environmental context (e.g., aridity and soil texture) indirectly controlled the effect of removal on biomass and biodiversity by influencing plant traits such as plant shape, allelopathic, or roots types. Our study demonstrates that a one‐size‐fits‐all approach to woody plant removal is not appropriate, and that consideration of woody plant identity, removal method, and environmental context is critical for optimizing removal outcomes. Applying this knowledge is fundamental for maintaining diverse and functional rangeland ecosystems as we move toward a drier and more variable climate.     

Quantitative evaluation of intraspecific genetic diversity in a natural fish population using environmental DNA analysis

Recent advances in environmental DNA (eDNA) analysis using high‐throughput sequencing (HTS) enable evaluation of intraspecific genetic diversity in a population. As the intraspecific genetic diversity provides invaluable information for wildlife conservation and management, there is an increasing demand to apply eDNA analysis to population genetics and the phylogeography by quantitative evaluation of intraspecific diversity. However, quantitative evaluations of intraspecific genetic diversity using eDNA is not straightforward because the number of eDNA sequence reads obtained by HTS may not be an index of the quantity of eDNA. In this study, to quantitatively evaluate genetic diversity using eDNA analysis, we applied a quantitative eDNA metabarcoding method using the internal standard DNAs. We targeted Ayu (Plecoglossus altivelis altivelis) and added internal standard DNAs with known copy numbers to each eDNA sample obtained from three rivers during the library preparation process. The sequence reads of each Ayu haplotype were successfully converted to DNA copy numbers based on the relationship between the copy numbers and sequence reads of the internal standard DNAs. In all rivers, the calculated copy number of each haplotype showed a significant positive correlation with the haplotype frequency estimated by a capture‐based survey. Furthermore, estimates of genetic indicators such as nucleotide diversity based on the eDNA copy numbers were comparable with those estimated based on a capture‐based study. Our results demonstrate that eDNA analysis with internal standard DNAs enables reasonable quantification of intraspecific genetic diversity, and this method could thus be a promising tool in the field of population genetics and phylogeography.     

Determination of absolute configuration of photo-degraded catechinopyranocyanidin A by modified Mosher's method

Catechinopyranocyanidins A and B (cpcA and cpcB) are two purple pigments present in the seed-coat of red adzuki bean, Vigna angularis, of which cpcA is the major pigment, containing two chiral carbons in the catechin part. Their absolute configurations were determined by comparison of their experimental and quantum chemical calculated electronic circular dichroisms (ECDs). These purple pigments are labile on light irradiation and easily decompose to photo-degraded catechinopyranocyanidins A and B (pdcpcA and pdcpcB), while retaining the stereostructure of the catechin residue. We applied modified Mosher's method for determining the chirality of the secondary alcohol in pdcpcA. Hexamethylation of pdcpcA by diazomethane followed by esterification using (S)- and (R)-MTPACl gave (R)- and (S)-MTPA esters, respectively. By analysis of the NMR spectra of (R)- and (S)-MTPA esters of tetramethylated (+)-catechin, the chirality of pdcpcA was determined to be 2R, 3S, same as the absolute configuration of cpcA.     

Diagrammatic scale for severity evaluation of the Eremanthus erythropappus–Puccinia velata pathosystem

Candeia (Eremanthus erythropappus (DC.) MacLeish), a native forest species from South America, has garnered commercial interest due to its production of essential oil that contains alpha-bisabolol. This compound is widely used in the pharmaceutical and cosmetics industry, with approximately 80% of Brazilian production being exported. Since candeia rust (Puccinia velata) has only been reported in Brazil, little is known about its epidemiology and control. There is no methodology to quantify rust severity in candeia, justifying the elaboration and validation of a diagrammatic scale containing eight levels of disease severity based on leaf area coverage (0.25%, 0.5%, 1%, 2%, 4%, 8%, 16% and 32%). In a natural sampling of disease in the field, 95% of the leaves showed severity below 16%, with the remaining 5% showing severities between 16% and 32% of leaf area. Validation of the proposed diagrammatic scale was performed by assessing the results from 10 inexperienced evaluators, performing evaluations of three leaves with different severity levels. The evaluations were performed at 7-day intervals; in the first instance, severity values were assigned without the diagrammatic scale, and for the second attempt, the scale proposed in this study was used. The accuracy and precision of the severity estimates produced by each evaluator compared to the real severity was analysed by linear regression and by Lin's statistics. The reproducibility of the estimates was evaluated by analysing the coefficient of determination of linear regressions by pairs of evaluators. The scale provided adequate levels of accuracy, precision, repeatability and reproducibility, indicating the proposed scale was a suitable method for quantifying the severity of candeia rust.