Determinants of peak muscle power: effects of age and physical conditioning

The relationships between absolute peak muscle power (W _peak), muscle cross sectional area (CSA_tot, i.e. the sum of both thigh and calf CSA) and muscle high energy phosphate concentration (adenosine 5-triphosphate [ATP] and phosphocreatine concentrations [PC]) were studied in 47 subjects classified into five groups: A, 10 sedentary (S) subjects aged 20–35 years; B, 9 S aged 35–50 years; C, 9 S aged more than 50 years; D, 13 children aged 8–13 years; and E, 6 athletes (top level volleyball players) aged 24 (SD 3) years. The W _peak was measured during a maximal vertical high jump off both feet on a force platform. The CSA_tot was measured anthropometrically. The [ATP] and [PC] were determined by ³¹Phosphorus nuclear magnetic resonance spectroscopy. The W _peak decreased with age, was 65% lower in D than in A, and 43% higher in E than in A. The CSA_tot did not vary with age, was 45% smaller in D than in A, and 15% greater in E than in A. The [ATP] and [PC] were essentially the same in all groups. The changes observed in W _peak were only partially accounted for by changes in CSA_tot. Therefore, in addition to the variables investigated, other factors appear to have been involved in the determination of W _peak with increasing age and training. An important role may be played by hormonal, particularly at puberty, and neural factors.     

Linking temperature sensitivity of soil organic matter decomposition to its molecular structure,accessibility, and microbial physiology

Temperature sensitivity of soil organic matter (SOM) decomposition may have a significant impact on global warming. Enzyme‐kinetic hypothesis suggests that decomposition of low‐quality substrate (recalcitrant molecular structure) requires higher activation energy and thus has greater temperature sensitivity than that of high‐quality, labile substrate. Supporting evidence, however, relies largely on indirect indices of substrate quality. Furthermore, the enzyme‐substrate reactions that drive decomposition may be regulated by microbial physiology and/or constrained by protective effects of soil mineral matrix. We thus tested the kinetic hypothesis by directly assessing the carbon molecular structure of low‐density fraction (LF) which represents readily accessible, mineral‐free SOM pool. Using five mineral soil samples of contrasting SOM concentrations, we conducted 30‐days incubations (15, 25, and 35 °C) to measure microbial respiration and quantified easily soluble C as well as microbial biomass C pools before and after the incubations. Carbon structure of LFs (<1.6 and 1.6–1.8 g cm^?3) and bulk soil was measured by solid‐state ¹³C‐NMR. Decomposition Q₁₀ was significantly correlated with the abundance of aromatic plus alkyl‐C relative to O‐alkyl‐C groups in LFs but not in bulk soil fraction or with the indirect C quality indices based on microbial respiration or biomass. The warming did not significantly change the concentration of biomass C or the three types of soluble C despite two‐ to three‐fold increase in respiration. Thus, enhanced microbial maintenance respiration (reduced C‐use efficiency) especially in the soils rich in recalcitrant LF might lead to the apparent equilibrium between SOM solubilization and microbial C uptake. Our results showed physical fractionation coupled with direct assessment of molecular structure as an effective approach and supported the enzyme‐kinetic interpretation of widely observed C quality‐temperature relationship for short‐term decomposition. Factors controlling long‐term decomposition Q₁₀ are more complex due to protective effect of mineral matrix and thus remain as a central question.     

Engineering Strontium Binding Affinity in an EF-hand Motif: A Quantum Chemical and Molecular Dynamics Study

Abstract

Proteins with the ability to specifically bind strontium would potentially be of great use in the field of nuclear waste management. Unfortunately, no such peptides or proteins are known—indeed, it is uncertain whether they exist under natural conditions due to low environmental concentrations of strontium. To investigate the possibility of devising such molecules, one of us (CV), in a previous experimental study [J. Biol. Inorg. Chem. 8, 33440 (2003)], proposed starting from an EF-hand motif of the protein calmodulin and mutating some residues to change the motif's specificity for calcium into one for strontium. In this paper, which represents a theoretical complement to the experimental work, we analyzed small-molecule crystallographic structures and performed quantum chemical calculations to identify possible mutations. We then constructed seven mutant sequences of the EF-hand motif and analyzed their dynamical and binding behaviors using molecular dynamics simulations and free-energy calculations (using the MM/PBSA method). As a result of these analyzes we were able to isolate some characteristics that could lead to mutant peptides with enhanced strontium affinity.     

Controlling the secondary-structure-forming tendencies of proteins by a backbone torsion-energy term

We examined a new backbone torsion-energy term proposed by us in the force field for protein systems. This torsion-energy term is represented by a double Fourier series in two variables, namely the backbone dihedral angles φ and ψ. It gives a natural representation of the torsion energy in the Ramachandran space in the sense that any two-dimensional energy surface periodic in both φ and ψ can be expanded by the double Fourier series. We can then easily control secondary-structure-forming tendencies by modifying the torsion-energy surface. For instance, we can increase or decrease the α-helix-forming-tendencies by lowering or raising the torsion-energy surface in the α-helix region and likewise increase or decrease the β-sheet-forming tendencies by lowering or raising the surface in the β-sheet region in the Ramachandran space. We applied this torsion-energy modification method to six force fields, AMBER parm94, AMBER parm96, AMBER parm99, CHARMM27, OPLS-AA and OPLS-AA/L, and demonstrated that our modifications of the torsion-energy terms resulted in the expected changes of secondary-structure-forming tendencies by performing folding simulations of α-helical and β-hairpin peptides.     

Ocean energy and the law of the sea: The need for a protocol

Although fossil fuels are the overwhelming source of energy for the world, and will continue to be so for the foreseeable future, demographic, environmental, political, and economic factors indicate that interest in alternative, renewable sources of energy will grow. There is a need for both global and national policies on ocean energy management. In particular, coastal states and the energy industry would benefit from guidelines that helped to create a predictable, stable environment in which long‐term, high‐cost research, development, and investment decisions could be made with confidence. Coastal states have jurisdiction over the maritime zones most relevant to energy production, but many lack the expertise and funds to develop this potential source. Industry must operate within the control of coastal states and will not be served well by a plethora of differing legal interpretations and unilaterally imposed restrictions and obligations from state to state. An Ocean Energy Protocol to the 1982 UN Convention on the Law of the Sea would afford governments and industry the opportunity to clarify their respective obligations and address particular interests for mutual benefit.     

春小麦胚芽伸长过程中渗透调节与能量代谢

本文用PEG模拟水分亏缺对春小麦红芒麦和绵阳11号胚芽伸长过程中生长、膨压、渗透势、水势和渗透调节能力与ATP含量、能荷变化及能量代谢间的关系进行了研究。结果表明,通过降低能荷,改变分解代谢与合成代谢的比率,使渗透调节物质积累,增加了幼苗的吸水能力,从而使其在一定的ATP能量水平上维持缓慢生长;抗旱品种红芒麦在水分亏缺下成苗速率较快,能保持一定的ATP能量水平和能荷值,渗透调节和吸水能力都比较强。     

Self‐Powered Wireless Sensor Node Enabled by a Duck‐Shaped Triboelectric Nanogenerator for Harvesting Water Wave Energy

This paper presents a fully enclosed duck‐shaped triboelectric nanogenerator (TENG) for effectively scavenging energy from random and low‐frequency water waves. The design of the TENG incorporates the freestanding rolling mode and the pitch motion of a duck‐shaped structure generated by incident waves. By investigating the material and structural features, a unit of the TENG device is successfully designed. Furthermore, a hybrid system is constructed using three units of the TENG device. The hybrid system achieves an instantaneous peak current of 65.5 µA with an instantaneous output power density of up to 1.366 W m^?2. Following the design, a fluid–solid interaction analysis is carried out on one duck‐shaped TENG to understand the dynamic behavior, mechanical efficiency, and stability of the device under various water wave conditions. In addition, the hybrid system is experimentally tested to enable a commercial wireless temperature sensor node. In summary, the unique duck‐shaped TENG shows a simple, cost‐effective, environmentally friendly, light‐weight, and highly stable system. The newly designed TENG is promising for building a network of generators to harvest existing blue energy in oceans, lakes, and rivers.     

Wearable All‐Fabric‐Based Triboelectric Generator for Water Energy Harvesting

Realizing energy harvesting from water flow using triboelectric generators (TEGs) based on our daily wearable fabric or textile has practical significance. Challenges remain on methods to fabricate conformable TEGs that can be easily incorporated into waterproof textile, or directly harvest energy from water using hydrophobic textile. Herein, a wearable all‐fabric‐based TEG for water energy harvesting, with additional self‐cleaning and antifouling properties is reported for the first time. Hydrophobic cellulose oleoyl ester nanoparticles (HCOENPs) are prepared from microcrystalline cellulose, as a low‐cost and nontoxic coating material to achieve superhydrophobic coating on fabrics, including cotton, silk, flax, polyethylene terephthalate (PET), polyamide (nylon), and polyurethane. The resultant PET fabric‐based water‐TEG can generate an instantaneous output power density of 0.14 W m^?2 at a load resistance of 100 MΩ. An all‐fabric‐based dual‐mode TEG is further realized to harvest both the electrostatic energy and mechanical energy of water, achieving the maximum instantaneous output power density of 0.30 W m^?2. The HCOENPs‐coated fabric provides excellent breathability, washability, and environmentally friendly fabric‐based TEGs, making it a promising wearable self‐powered system.     

Mutational analysis of the stability of the H2A and H2B histone monomers

The eukaryotic histone heterodimer H2A-H2B folds through an obligatory dimeric intermediate that forms in a nearly diffusion-limited association reaction in the stopped-flow dead time. It is unclear whether there is partial folding of the isolated monomers before association. To address the possible contributions of structure in the monomers to the rapid association, we characterized H2A and H2B monomers in the absence of their heterodimeric partner. By far-UV circular dichroism, the H2A and H2B monomers are 15% and 31% helical, respectively—significantly less than observed in X-ray crystal structures. Acrylamide quenching of the intrinsic Tyr fluorescence was indicative of tertiary structure. The H2A and H2B monomers exhibit free energies of unfolding of 2.5 and 2.9 kcal mol^− 1, respectively; at 10 μM, the sum of the stability of the monomers is ∼ 60% of the stability of the native dimer. The helical content, stability, and m values indicate that H2B has a more stable, compact structure than H2A. The monomer m values are larger than expected for the extended histone fold motif, suggesting that the monomers adopt an overly collapsed structure. Stopped-flow refolding—initiated from urea-denatured monomers or the partially folded monomers populated at low denaturant concentrations—yielded essentially identical rates, indicating that monomer folding is productive in the rapid association and folding of the heterodimer. A series of Ala and Gly mutations were introduced into H2A and H2B to probe the importance of helix propensity on the structure and stability of the monomers. The mutational studies show that the central α-helix of the histone fold, which makes extensive intermonomer contacts, is structured in H2B but only partially folded in H2A.     

A Fully Verified Theoretical Analysis of Contact‐Mode Triboelectric Nanogenerators as a Wearable Power Source

Harvesting mechanical energy from human activities by triboelectric nanogenerators (TENGs) is an effective approach for sustainable, maintenance‐free, and green power source for wireless, portable, and wearable electronics. A theoretical model for contact‐mode triboelectric nanogenerators based on the principles of charge conservation and zero loop‐voltage is illustrated. Explicit expressions for the output current, voltage, and power are presented for the TENGs with an external load of resistance. Experimental verification is conducted by using a laboratory‐fabricated contact‐mode TENG made from conducting fabric electrodes and polydimethylsiloxane/graphene oxide composite as the dielectric layer. Excellent agreements of the output voltage, current, and power are demonstrated between the theoretical and experimental results, without any adjustable parameters. The effects of the moving speed on output voltage, current, and power are illustrated in three cases, that is, the motion with constant speed, the sinusoidal motion cycles, and the real walking cycles by human subject. The fully verified theoretical model is a very powerful tool to guide the design of the device structure and selection of materials, and optimization of performance with respect to the application conditions of TENGs.