Aqueous Solution‐Processable Small Molecular Metal‐Chelate Complex Electrolyte for Flexible All‐Solid State Energy Storage Devices

A small molecular metal‐chelate complex, tris(8‐hydroxyquinoline‐5‐sulfonic acid) aluminum (AlQSA₃), that has three sulfonic acid groups per molecule leading to an excellent solubility in water is reported as a liquid‐free perfect solid‐state electrolyte for flexible film‐type all‐solid‐state energy storage devices. The AlQSA₃ material is synthesized by one‐step reaction of aluminum triisopropoxide and 8‐hydroxyquinoline‐5‐sulfonic acid. The aqueous solutions of AlQSA₃ are applied to fabricate flexible film‐type all‐solid state electric double layer capacitors with indium‐tin oxide thin film electrodes. The ion conductivity of the AlQSA₃ film reaches 0.116 mS cm^?1, while a pronounced hysteresis are obtained in the cyclic voltammetry measurement. The AlQSA₃ film capacitors exhibit an output voltage of 1.5 V at 20 μA cm^?2, which is considerably stable by the repeated operation. In particular, the peak output voltage is well kept even after 180° bending for 500 times in the case of the flexible AlQSA₃ film capacitors.     

Na3V2(PO4)3 as the Sole Solid Energy Storage Material for Redox Flow Sodium‐Ion Battery

Redox flow batteries have considerable advantages of system scalability and operation flexibility over other battery technologies, which makes them promising for large‐scale energy storage application. However, they suffer from low energy density and consequently relatively high cost for a nominal energy output. Redox targeting–based flow batteries are employed by incorporating solid energy storage materials in the tank and present energy density far beyond the solubility limit of the electrolytes. The success of this concept relies on paring suitable redox mediators with solid materials for facilitated reaction kinetics and lean electrolyte composition. Here, a redox targeting‐based flow battery system using the NASICON‐type Na₃V₂(PO₄)₃ as a capacity booster for both the catholyte and anolyte is reported. With 10‐methylphenothiazine as the cathodic redox mediator and 9‐fluorenone as anodic redox mediator, an all‐organic single molecule redox targeting–based flow battery is developed. The anodic and cathodic capacity are 3 and 17 times higher than the solubility limit of respective electrolyte, with which a full cell can achieve an energy density up to 88 Wh L^?1. The reaction mechanism is scrutinized by operando and in‐situ X‐ray and UV–vis absorption spectroscopy. The reaction kinetics are analysed in terms of Butler–Volmer formalism.     

Repeated Batch Production of Theanine by Coupled Fermentation with Energy Transfer Using Membrane-Enclosed γ-Glutamylmethylamide Synthetase and Dried Yeast Cells

γ-Glutamylmethylamide synthetase and dried baker’s yeast cells were enclosed together in a dialysis membrane tube to produce theanine repeatedly by coupled fermentation with energy transfer. The membrane-enclosed enzyme preparation (M-EEP) formed approximately 600 mM theanine from glutamic acid and ethylamine at a 100% conversion rate. M-EEP maintained its productivity of theanine during six consecutive reactions in a mixture containing NAD⁺.     

MD Simulations and first principles to evaluate the role of binary Fe–V alloys layer on the radiation resistance in the alpha-iron

Radiation damage in reactor materials caused by the collision of the fast neutrons has a great impact on the reliability and safety of nuclear reactors. The element vanadium has attracted interest in many fields due to its advantageous properties in alloys. Thus, molecular dynamics simulation (MD) and first-principles calculation have been executed here to explore the radiation-resistant properties of five materials adding a layer in the bulk (pure iron and four types of Fe–V alloys containing 10%-40% V). The following results were inferred from these simulations. Firstly, the number of Frenkel pairs (FPs) at the stable quenching stage in the bulk decreases when the Fe–V alloy is added as an anti-radiation layer to the bulk. These benefits are evident for the Fe₈₀V₂₀ and alloy layers with more vanadium. The main reason is that the Fe–V binding energy is greater than the Fe-Fe binding energy, which can make the Primary Knock-On atom (PKA) lose more energy at the Fe–V alloy layer. Secondly, the average value of point-defect, cluster and defect clustered fractions in the bulk of Fe–V alloy is smaller than that in the pure iron at the stable quenching stage, especially for the Fe₈₀V₂₀ alloy.     

Use of restrained molecular dynamics in water to determine three-dimensional protein structure: prediction of the three-dimensional structure of Ecballium elaterium trypsin inhibitor II

Refinement of distance geometry (DG) structures of EETI-II (Heitz et al.: Biochemistry 28:2392-2398, 1989), a member of the squash family trypsin inhibitor, have been carried out by restrained molecular dynamics (RMD) in water. The resulting models show better side chain apolar/polar surface ratio and estimated solvation free energy than structures refined "in vacuo." The consistent lower values of residual NMR constraint violations, apolar/polar surface ratio, and solvation free energy for one of these refined structures allowed prediction of the 3D folding and disulfide connectivity of EETI-II. Except for the few first residues for which no NMR constraints were available, this computer model fully agreed with X-ray structures of CMTI-I (Bode et al.: FEBS Lett. 242:285-292, 1989) and EETI-II complexed with trypsin that appeared after the RMD simulation was completed. Restrained molecular dynamics in water is thus proved to be highly valuable for refinement of DG structures. Also, the successful use of apolar/polar surface ratio and of solvation free energy reinforce the analysis of Novotny et al. (Proteins 4:19-30, 1988) and shows that these criteria are useful indicators of correct versus misfolded models.     

Temperature and prey quality effects on growth of juvenile walleye pollock Theragra chalcogramma (Pallas): a spatially explicit bioenergetics approach

A bioenergetics model for juvenile age‐0 year walleye pollock Theragra chalcogramma was applied to a spatially distinct grid of samples in the western Gulf of Alaska to investigate the influence of temperature and prey quality on size‐specific growth. Daily growth estimates for 50, 70 and 90 mm standard length (L_S) walleye pollock during September 2000 were generated using the bioenergetics model with a fixed ration size. Similarities in independent estimates of prey consumption generated from the bioenergetics model and a gastric evacuation model corroborated the performance of the bioenergetics model, concordance correlation (r_c) = 0·945, lower 95% CL (transformed) (L₁) = 0·834, upper 95% CL (transformed) (L₂) = 0·982, P < 0·001. A mean squared error analysis (M_SE) was also used to partition the sources of error between both model estimates of consumption into a mean component (M_C), slope component (S_C), and random component (R_C). Differences between estimates of daily consumption were largely due to differences in the means of estimates (M_C= 0·45) and random sources (R_C= 0·49) of error, and not differences in slopes (S_C= 0·06). Similarly, daily growth estimates of 0·031–0·167 g day^?1 generated from the bioenergetics model was within the range of growth estimates of 0·026–0·190 g day^?1 obtained from otolith analysis of juvenile walleye pollock. Temperature and prey quality alone accounted for 66% of the observed variation between bioenergetics and otolith growth estimates across all sizes of juvenile walleye pollock. These results suggest that the bioenergetics model for juvenile walleye pollock is a useful tool for evaluating the influence of spatially variable habitat conditions on the growth potential of juvenile walleye pollock.     

不同能源柳无性系对土壤镉污染的抗性研究

运为了比较不同能源柳无性系对土壤镉抗性的差异,采用盆栽方法,设置土壤镉含量5个梯度(0、10、20、40、80 mg·kg^-1),以乡土旱柳为对照,对能柳1、能柳2、能柳E、能柳C的扦插幼苗对土壤镉污染的生理生态反应进行了系统测定,分析了不同无性系的抗性。结果显示,低浓度处理（≤20 mg·kg^-1）促进苗木生长,其中能柳2在10 mg·kg^-1处理下根和单株生物量增幅最大,可达到对照的132.0%和120.0%;随着镉浓度的增加,生长量下降,在最高浓度处理下,能柳C生长量降低最少,根、枝、叶和单株生物量分别为对照的86.1%、85.3%、82.9%、84.9%,旱柳的枝、叶生物量降低最多,为对照（无镉）的43.8%、45.0%,而能柳1的根、单株生物量降低最多,仅为对照的36.1%、44.4%;随着镉浓度的增加,不同能源柳无性系叶片的SOD、POD、CAT活性和根系活力基本呈现先升后降的趋势,其中,CAT活性变化较为平缓;关于SOD活性和根系活力,能柳1、能柳2在20 mg·kg^-1时已显著下降,旱柳在40 mg·kg^-1时显著下降,而能柳E、能柳C在40 mg·kg^-1时才显著下降。采用隶属函数对5个无性系在镉胁迫条件下的生长和酶指标进行综合分析,不同无性系对土壤镉污染的抗性顺序为能柳C>能柳2>能柳1>旱柳>能柳E。不同无性系对镉均有抗性,都可在镉污染区推广种植,栽培中,应根据土壤污染和绿化目标,做出适当选择。     

Quantifying and Understanding Voltage Losses Due to Nonradiative Recombination in Bulk Heterojunction Organic Solar Cells with Low Energetic Offsets

Open‐circuit voltage (V_OC) losses in organic photovoltaics (OPVs) inhibit devices from reaching V_OC values comparable to the bandgap of the donor–acceptor blend. Specifically, nonradiative recombination losses (?V_nr) are much greater in OPVs than in silicon or perovskite solar cells, yet the origins of this are not fully understood. To understand what makes a system have high or low loss, an investigation of the nonradiative recombination losses in a total of nine blend systems is carried out. An apparent relationship is observed between the relative domain purity of six blends and the degree of nonradiative recombination loss, where films exhibiting relatively less pure domains show lower ?V_nr than films with higher domain purity. Additionally, it is shown that when paired with a fullerene acceptor, polymer donors which have bulky backbone units to inhibit close π–π stacking exhibit lower nonradiative recombination losses than in blends where the polymer can pack more closely. This work reports a strategy that ensures ?V_nr can be measured accurately and reports key observations on the relationship between ?V_nr and properties of the donor/acceptor interface.     

Biomass: Is it a useful tool in paleocommunity reconstruction?

In general, more of the biomass of the community is preserved than is its numerical abundance. Thus, the paleontologist, on the average, works with more of the community when biomass is used. Community characteristics such as taxon dominance and habitat proportions are at least as accurately derived from biomass as numerical abundance. The use of biomass is clearly more appropriate in describing energy flow and trophic proportions. Whenever possible, biomass should be used as a complement to numerical abundance in future paleoecologic reconstructions.