Inverted Tandem Polymer Solar Cells with Polyethylenimine‐Modified MoOX/Al2O3:ZnO Nanolaminate as the Charge Recombination Layers

A new charge recombination layer for inverted tandem polymer solar cells is reported. A bilayer of MoO_X/Al₂O₃:ZnO nanolaminate is shown to enable efficient charge recombination in inverted tandem cells. A polymer surface modification on the MoO_X/Al₂O₃:ZnO nanolaminate bilayer increases the work function contrast between the two outward surfaces of the charge recombination layer, further improving the performance of tandem solar cells. An analysis of the electrical, optical, and surface properties of the charge recombination layer is presented. Inverted tandem polymer solar cells, with two photoactive layers comprising poly (3‐hexylthiophene) (P3HT):indene‐C₆₀ bisadduct (IC₆₀BA) for the bottom cell and poly[(4,8‐bis‐(2‐ethylhexyloxy)‐benzo[1,2‐b:4,5‐b']dithiophene)‐2,6‐diyl‐alt‐(4‐(2‐ethylhexanoyl)‐thieno[3,4‐b]thiophene))‐2,6‐diyl] (PBDTTT‐C):[6,6]‐phenyl C₆₁ butyric acid methyl ester (PC₆₀BM) for the top cell, yield an open‐circuit voltage of 1481 mV ± 15 mV, a short‐circuit current density of 7.1 mA cm^?2 ± 0.1 mA cm^?2, and a fill factor of 0.62 ± 0.01, resulting in a power conversion efficiency of 6.5% ± 0.1% under simulated AM 1.5G, 100 mW cm^?2 illumination.     

滇西北纳帕海湖滨带优势植物茭草茎解剖结构对模拟增温的响应

高原湿地湖滨带植物对气候变暖表现出强烈的功能响应,是全球气候变化的主要现象之一。植物解剖性状直接关系到植物的生态功能,为探讨气候变暖对湿地植物茎解剖结构的影响,该研究利用开顶式生长室分析了模拟增温对滇西北纳帕海湿地湖滨带挺水植物茭草茎解剖结构的影响。结果表明:(1)茭草地上茎在增温4 ℃的范围内,主要通过增加表皮结构厚度以增加表皮失水来响应增温; 地下茎在增温2 ℃的轻度增温条件下与地上茎的响应策略相同,而在增温4 ℃时主要通过减小维管结构大小以降低气穴化风险来响应增温。(2)年最高温度和夜间积温是影响茭草茎解剖结构性状的关键因子,但该两个温度因子仅对地下茎筛管大小的影响达到显著水平(R²=0.838, P<0.01)。(3)内表皮细胞厚度是地上茎响应增温的最主要性状,并与温度因子呈显著正相关。地下茎导管和筛管大小是地下茎响应温度升高的主要性状,二者与温度变量呈负相关关系。综上表明,茭草地上茎和地下茎对增温响应策略存在差异,为揭示高原湿地植物应对气候变暖的响应规律以及生态适应策略提供了科学依据。基于当前气候变暖的背景,建议未来采用更科学的实验方法对更多高原湿地植物的生态响应过程及规律进一步深入研究。     

Extended Producer Responsibility in the United States

Extended producer responsibility (EPR) is a policy approach that requires manufacturers to finance the costs of recycling or safely disposing of products consumers no longer want. This article describes the evolution of EPR policies in the United States, focusing on the role of states as policy actors. For their part, federal lawmakers have not embraced EPR policies except to remove some barriers to state‐level initiatives. In the two‐decade period from 1991 to 2011, U.S. states enacted more than 70 EPR laws. In addition, manufacturers have implemented voluntary programs to collect and recycle products, but those efforts have proven largely ineffective in capturing significant quantities of waste products. With the help of new coalitions of diverse interest groups, recently states have renewed efforts to establish effective EPR programs, enacting 40 laws in the period 2008–2011. Several state initiatives suggest a more promising future for EPR.     

Li–Ti Cation Mixing Enhanced Structural and Performance Stability of Li‐Rich Layered Oxide

Li‐rich layered metal oxides are one type of the most promising cathode materials in lithium‐ion batteries but suffer from severe voltage decay during cycling because of the continuous transition metal (TM) migration into the Li layers. A Li‐rich layered metal oxide Li_1.2Ti_0.26Ni_0.18Co_0.18Mn_0.18O₂ (LTR) is hereby designed, in which some of the Ti⁴⁺ cations are intrinsically present in the Li layers. The native Li–Ti cation mixing structure enhances the tolerance for structural distortion and inhibits the migration of the TM ions in the TMO₂ slabs during (de)lithiation. Consequently, LTR exhibits a remarkable cycling stability of 97% capacity retention after 182 cycles, and the average discharge potential drops only 90 mV in 100 cycles. In‐depth studies by electron energy loss spectroscopy and aberration‐corrected scanning transmission electron microscopy demonstrate the Li–Ti mixing structure. The charge compensation mechanism is uncovered with X‐ray absorption spectroscopy and explained with the density function theory calculations. These results show the superiority of introducing transition metal ions into the Li layers in reinforcing the structural stability of the Li‐rich layered metal oxides. These findings shed light on a possible path to the development of Li‐rich materials with better potential retention and a longer lifespan.     

Although there is no Physical Short‐Term Scarcity of Phosphorus,its Resource Efficiency Should be Improved

The German government has adopted a law that requires sewage plants to go beyond the recovery of phosphorus from wastewater and to promote recycling. We argue that there is no physical global short‐ or mid‐term phosphorus scarcity. However, we also argue that there are legitimate reasons for policies such as those of Germany, including: precaution as a way to ensure future generations’ long‐term supply security, promotion of technologies for closed‐loop economics in a promising stage of technology development, and decrease in the current supply risk with a new resource pool.     

生物衍生止血材料研究进展

生物来源的胶原蛋白、明胶、纤维蛋白原、纤维素、淀粉以及壳聚糖等材料,因为其无毒性、良好的生物相容性、生物可降解性以及促凝血活性越来越受到研究者的青睐,成为更加优异的止血选择。本文综述目前止血材料的几种类型及相应的止血机理,重点讨论上述生物来源止血材料的基本结构、止血机理、市售产品及最新科研进展,并对其发展前景进行展望。     

组织工程细胞片的构建

作为一种无支架的组织工程技术,组织工程细胞片不仅可以避免支架材料带来的不利影响,而且可通过组装进一步形成更为复杂的三维功能化组织,因而在生物医学领域备受关注.细胞片的构建主要是基于敏感性材料所构建的培养基底,通过改变温度、酶、光、离子、氧化还原pH、糖等刺激因素,调节基底对细胞的粘附行为使细胞发生自然脱附,从而获取细胞...     

Development of Dopant‐Free Organic Hole Transporting Materials for Perovskite Solar Cells

There has been considerable progress over the last decade in development of the perovskite solar cells (PSCs), with reported performances now surpassing 25.2% power conversion efficiency. Both long‐term stability and component costs of PSCs remain to be addressed by the research community, using hole transporting materials (HTMs) such as 2,2′,7,7′‐tetrakis(N,N′‐di‐pmethoxyphenylamino)‐9,9′‐spirbiuorene(Spiro‐OMeTAD) and poly[bis(4‐phenyl)(2,4,6‐trimethylphenyl)amine] (PTAA). HTMs are essential for high‐performance PSC devices. Although effective, these materials require a relatively high degree of doping with additives to improve charge mobility and interlayer/substrate compatibility, introducing doping‐induced stability issues with these HTMs, and further, additional costs and experimental complexity associated with using these doped materials. This article reviews dopant‐free organic HTMs for PSCs, outlining reports of structures with promising properties toward achieving low‐cost, effective, and scalable materials for devices with long‐term stability. It summarizes recent literature reports on non‐doped, alternative, and more stable HTMs used in PSCs as essential components for high‐efficiency cells, categorizing HTMs as reported for different PSC architectures in addition to use of dopant‐free small molecular and polymeric HTMs. Finally, an outlook and critical assessment of dopant‐free organic HTMs toward commercial application and insight into the development of stable PSC devices is provided.