Regulation of post-larval development in the European eel: thyroid hormone level, progress of pigmentation and changes in behaviour

Based on thyroid hormone concentrations and histological criteria, glass eels of Anguilla anguilla caught in the French Atlantic coast in January and November were found to be late metamorphic. The pigmentation of the glass eels was demonstrated to be regulated by thyroid hormones, and evidence is given that together, the end of the progression of pigmentation, a fully developed gut and a change in behaviour marked the end of metamorphosis.     

Optical,emission, and excitation dynamics of Eu3+-doped bismuth-based phosphate glass for visible display laser applications

Eu³⁺-doped-bismuth-based phosphate glasses with chemical equation (60 − x)P₂O₅–20Bi₂O₃−10Na₂CO₃–10SrF₂–xEu₂O₃ (PBNSEu), (where x = 0, 0.1, 0.5, 1.0, 1.5 and 2 mol%) were fabricated using the melt-quenching method. Obtain X-ray diffraction (XRD), energy-dispersive X-ray (EDAX), and Fourier transform infrared (FTIR) spectra were used to characterize the structure of the prepared PBNSEu glass. The J–O (Judd–Ofelt) intensity parameters (Ω₂, Ω₄) were estimated using photoluminescence emission spectra. When excited with a xenon lamp at λ_exc = 394 nm, the most intense red-emission transition occurred at ~612 nm (⁵D₀→⁷F₂). J–O intensity parameters were used to calculate radiative properties, whereas the radiative branching ratio (β_R), radiative transition probability (A_R), radiative lifetime (τ_R), and total radiative transition rate (A_τ) were calculated for the transitions ⁵D₀→⁷F_J (where J = 0–4) and were obtained in the emission spectra for europium ion-doped in the current glass. Using the CIE1931 chromaticity coordinates axes, the colours of various concentrations of Eu³⁺ ion-doped PBNS glass were evaluated using the emission spectra. Temperature-dependent luminescence spectra were recorded for the optimized PBNSEu20 glass to calculate the activation energy. These results strongly suggested red components in w-LEDs and visible display laser applications.     

Evaluation of production of recombinant human interleukin-2 in fluidized bed bioreactor

The production of recombinant human interleukin-2 in a fluidized bed bioreactor containing porous glass carriers is described. Cultivations were carried out with different medium formulations over 80 days. Maximal cell densities and product yield could be maintained even when protein free medium was perfused, with less than 10% cell washout. Due to this effective immobilization of the cells in the reactor, continuous operation was easy to perform. Final cell densities on the order of 3.8 x 10(8) mL(-1) intrasphere volume were reached while the interleukin-2 production rate was 0.75 mg L(-1) d(-1). The production rate showed a maximum of a 1.9 fold decrease compared with a homogeneous stirred bubble-free aerated system. This result was in contrast to that achieved with hybridoma cell lines, where better performance was obtained with the fluidized bed bioreactor. The situation may reflect the problems caused by the dense cell culture with adherent cells, as previously shown in a hollow-fiber bioreactor with the same cell line.     

Cohesin-dockerin microarray: Diverse specificities between two complementary families of interacting protein modules

The cellulosome is an intricate multienzyme complex, designed for efficient degradation of plant cell wall polysaccharides, notably cellulose. The supramolecular cellulosome architecture in different bacteria is the consequence of the types and specificities of the interacting cohesin and dockerin modules, borne by the different cellulosomal subunits. In this study, we describe a microarray system for determining cohesin-dockerin specificity, which allows global comparison among the interactions between various members of these two complementary families of interacting protein modules. Matching recombinant fusion proteins were prepared that contained one of the interacting modules: cohesins were joined to an appropriate cellulose-binding module (CBM) and the dockerins were fused to a thermostable xylanase that served to enhance expression and proper folding. The CBM-fused cohesins were immobilized on cellulose-coated glass slides, to which xylanase-fused dockerin samples were applied. Knowledge of the specificity characteristics of native and mutated members of the cohesin and dockerin families provides insight into the architecture of the parent cellulosome and allows selection of suitable cohesin-dockein pairs for biotechnological and nanotechnological application. Using this approach, extensive cross-species interaction among type-II cohesins and dockerins is shown for the first time. Selective intraspecies binding of an archaeal dockerin to two complementary cohesins is also demonstrated.     

A Comparison of Hybridization Efficiency between Flat Glass and Channel Glass Solid Supports

Two different solid supports, channel glass and flat glass, were compared for their affect on the sensitivity and efficiency of DNA hybridization reactions. Both solid supports were tested using a set of arrayed, synthetic oligonucleotides that are designed to detect short insertion/deletion polymorphisms (SIDPs). A total of 13 different human SIDPs were chosen for analysis. Capture probes, designed for this test set, were covalently immobilized on substrates. Hybridization efficiency was assessed using fluorescently labeled stacking probes which were preannealed to the target and then hybridized to the support-bound oligonucleotide array; the hybridization pattern was detected by fluorescence imaging. It was found that structural features of nucleic acid capture probes tethered to a solid support and the molecular basis of their interaction with targets in solution have direct implications on the hybridization process. Our results demonstrate that channel glass has a number of practical advantages over flat glass including higher sensitivity and a faster hybridization rate.     

Influence of the glass packing on the contamination of pharmaceutical products by aluminum. Part I: Salts, glucose, heparin and albumin

The presence of aluminium (Al) in pharmaceutical products used parenterally as sodium and potassium chlorides, glucose, heparin and albumin were investigated with respect to their storage in glass containers. As glasses can have aluminium in their composition, the aluminium may be released from the glass into the solution. The action of the substances above mentioned were investigated storing their solutions in glass and plastic containers, and measuring the aluminium in solution at determined time intervals. The aluminium present in the commercial pharmaceutical products, stored in both plastic and glass containers were also measured. All glass containers were analysed to determine their aluminium content. The aluminium determinations were done by atomic absorption spectrometry. The results showed that aluminium is present in all analysed glasses in a percentage of 0.6 to 3%. Although all substances already have a residual aluminium contamination, the major contribution comes from the glass containers in which their solutions were stored. The contamination arising from glass depends too much on the nature of the substance. While the salts extracted about 400 μg Al/l in 60 days, glucose extracted 150 μg Al/l, and albumin and heparin about 500 μg Al/l in the same time interval. Commercial solutions of glucose contain about 10 μg Al/l when stored in polyethylene and from 350 to 1000 μg Al/l when in glass ampules. Considering all commercial products, solutions stored in plastic containers contained no more than 20 μg Al/l whereas in glass the aluminium contamination reached 1000 μg/l, and in all of them the aluminium increases with the age of the product.     

Solute-specific effects of osmotic stress on Staphylococcus aureus

AIM: To determine if cell death from osmotic stress is because of lack of sufficient energy to maintain cell metabolism. Additionally, the solute-specific effect of five humectants on bacterial osmoregulation and cell survival was examined. METHODS AND RESULTS: Staphylococcus aureus was placed into 84% relative humidity (RH) broth (five humectants used individually). ATP, ADP and cell viability measurements were determined over time. The results indicate that ATP is not the limiting factor for cell survival under excessive osmotic stress. Although the same RH was achieved with various humectants, the rates of cell death varied greatly as did the sensitivities of the cell populations to osmotic stress. CONCLUSIONS: The results from this study provide strong evidence that mechanisms of osmotic inactivation depend on the solute. The molecular mobility of the system may be an important means to explain these differences. SIGNIFICANCE AND IMPACT OF THE STUDY: By bringing together an understanding of solute-specific effects, microbial physiology and genetics, the mechanisms of inactivation of micro-organisms by solute-specific osmotic stress may be elucidated, and this knowledge may then be exploited to ensure the production of high quality, safe foods.     

Multiple folding mechanisms of protein ubiquitin

Based on the C(alpha) Go-type model, the folding kinetics and mechanisms of protein ubiquitin with mixed alpha/beta topology are studied by molecular dynamics simulations. The relaxation kinetics shows that there are three phases, namely the major phase, the intermediate phase and the slowest minor phase. The existence of these three phases are relevant to the phenomenon found in experiments. According to our simulations, the folding at high temperatures around the folding transition temperature T(f) is of a two-state process, and the folding nucleus is consisted of contacts between the front end of alpha-helix and the turn(4). The folding at low temperature (approximately T = 0.8) is also studied, where an A-state like structure is found lying on the major folding pathway. The appearance of this structure is related to the stability of the first part (residue 1-51) of protein ubiquitin. As the temperature decreases, the formation of secondary structures, tertiary structures and collapse of the protein are found to be decoupled gradually and the folding mechanism changes from the nucleation-condensation to the diffusion-collision. This feature indicates a unifying common folding mechanism for proteins. The intermediate phase is also studied and is found to represent a folding process via a long-lived intermediate state which is stabilized by strong interactions between the beta(1) and the beta(5) strand. These strong interactions are important for the function of protein ubiquitin as a molecular chaperone. Thus the intermediate phase is assumed as a byproduct of the requirement of protein function. In addition, the validity of the current Go-model is also investigated, and a lower limited temperature for protein ubiquitin T(limit) = 0.8 is proposed. At temperatures higher than this value, the kinetic traps due to glass dynamics cannot be significantly populated and the intermediate states can be reliably identified although there is slight chevron rollover in the folding rates. At temperature lower than T(limit), however, the traps due to glass dynamics become dominant and may be mistaken for real intermediate states. This limitation of valid temperature range prevents us to reveal the burst phase intermediate in the major folding phase since it might only be stabilized at temperatures lower than T(limit), according to experiments. Our works show that caution must be taken when studying low-temperature intermediate states by using the C(alpha) Go-models.     

Inactivation of Escherichia coli, Listeria monocytogenes, Pseudomonas aeruginosa and Staphylococcus aureus on stainless steel and glass surfaces by neutral electrolysed water

AIM: To ascertain the efficacy of neutral electrolysed water (NEW) in reducing Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Listeria monocytogenes on glass and stainless steel surfaces. Its effectiveness for that purpose is compared with that of a sodium hypochlorite (NaClO) solution with similar pH, oxidation-reduction potential (ORP) and active chlorine content. METHODS AND RESULTS: First, the bactericidal activity of NEW was evaluated over pure cultures (8.5 log CFU ml-1) of the abovementioned strains: all of them were reduced by more than 7 log CFU ml-1 within 5 min of exposure either to NEW (63 mg l-1 active chlorine) or to NaClO solution (62 mg l-1 active chlorine). Then, stainless steel and glass surfaces were inoculated with the same strains and rinsed for 1 min in either NEW, NaClO solution or deionized water (control). In the first two cases, the populations of all the strains decreased by more than 6 log CFU 50 cm-2. No significant difference (P相似文献