Lipid-polyethylene glycol interactions: II. Formation of defects in bilayers

Summary Polyethylene glycol, a known cell fusogen, is found to induce the formation of structural defects in egg phosphatidylcholine multilamellar vesicles, as shown by freeze-fracture microscopy.³¹P NMR spectra of these vesicles reveal the existence of a nonbilayer (isotropic) phase. The observed disruption in the bilayers is believed to be associated with an intermediate stage of membrane fusion.Abbreviations PEG Polyethylene glycol - IMP Intramembranous particle - PC Phosphatidylcholine - PS Phosphatidylserine - SUV Small unilamellar vesicles - MLV Multilamellar vesicles - DPPC Dipalmitoyl phosphatidylcholine - DSC Differential scanning calorimetry - DMPC Dimyristoylphosphatidylcholine - T _c Phase transition temperature     

Starch in prasinophycean algae

Reserve products isolated from three species of prasinophycean algae: Pyramimonas parkeae Norris and Pearson, Pyramimonas amylifera Conrad and Platymonas tetrathele West were compared. Three pieces of experimental evidence indicate that the reserve product of each of the species analyzed is a true starch. (I) There is no essential difference between the light absorption curve for the complex formed between corn starch and iodine and the corresponding curves for the algal products. (2) The β-amylase breakdown limit of these compounds is very close to that of corn starch. (3) The X-ray diffraction diagrams produced by the reserve material from Pyramimonas parkeae and Platymonas tetrathele is a so-called A-spectrum characteristic of cereal starches while the diagram produced by grains from Pyramimonas amylifera corresponds to the B-spectrum typical for tuber starches. The dissimilarity between the X-ray diagrams produced by the starches from the Pyramimonas species suggests that a re-examination of the taxonomy of these species is warranted.     

The Application of Electron Backscatter Diffraction on Halide Perovskite Materials

Recently, the application of electron backscatter diffraction (EBSD) in halide perovskites has enabled the correlation of the micro‐structural arrangement of polycrystalline grains with other properties (optical, electrical, mechanical, and chemical) in a “pixel‐by‐pixel” approach. Most studies so far have used an ultra‐sensitive electron beam detector that has sensitivity thousands of times higher than a traditional scintillator screen and charge coupled device camera, enabling much lower beam currents. An alternative approach has been the use of low vacuum measurement conditions to avoid charge buildup that leads to damage. This review focuses on introducing the classical EBSD technique to the halide perovskite community, where it has been highly underutilized due to beaminduced damage in these relatively unstable materials. Recent research is used to dispel some common misconceptions about grain boundaries in halide perovskites and highlight what has been learned by comparing and correlating EBSD with other techniques. Additionally, the remaining limitations, development challenges, and future of the EBSD technique for halide perovskites are discussed. Successful utilization of the EBSD technique as a common characterization tool in the halide perovskite community will enable scientists and engineers to develop maps of cross correlated properties, helping to unlock the full potential of this complex material system.     

Enantioselective Synthesis and Antimicrobial Activities of Tetrahydro‐Β‐Carboline Diketopiperazines

A series of single isomers tetrahydro‐β‐carboline diketopiperazines were stereoselectively synthesized starting from l ‐tryptophan methyl ester hydrochloride and six aldehydes through a four‐step reaction including Pictet‐Spengler reaction, crystallization‐induced asymmetric transformations (CIAT), Schotten‐Baumann reaction, and intramolecular ester amidation. The chemical structures were characterized by nuclear magnetic resonance (NMR) and elemental analysis, among which two compounds were determined by x‐ray single crystal diffraction. Moreover, antimicrobial activities of all the compounds were also tested. Chirality 25:656–662, 2013. © 2013 Wiley Periodicals, Inc.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

Formation of Covellite (CuS) Under Biological Sulfate-Reducing Conditions

Sulfate-reducing bacteria (SRB) play a major role in the precipitation of metal sulfides in the environment. In this work, biogenic copper sulfide formation was examined in cultures of SRB and compared to chemically initiated Cu sulfide precipitation as a reference system. Mixed cultures of SRB were incubated at 22, 45, and 60°C in nutrient solutions that contained copper sulfate. Abiotic reference samples were produced by reacting uninoculated liquid media with Na₂S solutions under otherwise identical conditions. Precipitates were collected anaerobically by centrifugation, frozen in liquid N₂, and freeze-dried, followed by analysis using X-ray diffraction (XRD), X-ray fluorescence, and scanning electron microscopy. Covellite (CuS) was the only mineral found in the precipitates. Covellite was less crystalline in the biogenic precipitates than in the abiotic samples based on XRD peak widths and peak to background ratios. Poor crystallinity may be the result of slower precipitation rates in bacterial cultures as compared to the abiotic reference systems. Furthermore, bacterial cells may inhibit the nucleation steps that lead to crystal formation. Incubation at elevated temperatures improved the crystallinity of the biotic specimens.     

Effects of growth on residual stress distribution along the radial depth of cortical cylinders from bovine femurs

Residual stress is defined as the stress that remains in bone tissue without any external forces. This study investigated the effects of growth on residual stress distributions from the surface to deeper regions of cortical cylinders obtained from less-than-one-month-old (Group Y) and two-year-old (Group M) bovine femurs. In these experiments, five diaphysis specimens from each group were used. Residual stress was measured using a high-energy synchrotron white X-ray beam to penetrate X-rays into the deeper region of the bone specimens. The measurements in the cortical cylinders from Groups Y and M were performed at 0.5- and 1-mm intervals, respectively, from the outer surface to the deeper region of the diaphysis specimens at four positions: anterior, posterior, lateral, and medial. The residual stress was calculated on the basis of variation in the interplanar spacing of hydroxyapatite crystals in the bone tissue. According to the results, the diaphysis specimens from Group Y were not subjected to large residual stresses (average −1.2 MPa and 2.4 MPa at the surface region and 1.5 mm depth, respectively). In Group M, the surface region of the diaphysis specimens was subjected to tensile residual stresses (average 6.7 MPa) and the deeper region was subjected to compressive stresses (average −8.2 MPa at 3 mm depth). There was a strong significant difference between both these regions. The value of residual stresses at the surface region of the diaphysis specimens in both the groups had a positive statistical correlation with the cortical thickness at the measured locations.     

Synthesis,structure analysis,antitumor evaluation and 3D-QSAR studies of 3,6-disubstituted-dihydro-1,2,4,5-tetrazine derivatives

3,6-Diaryl-dihydro-1,2,4,5-tetrazine derivatives were synthesized and their structures were confirmed by single-crystal X-ray diffraction. Monosubstituted dihydrotetrazines are the 1,4-dihydro structure, but disubstituted dihydrotetrazines are the 1,2-dihydro structure. The results of further research indicated there may be a rearrangement during the synthesis process of disubstituted dihydrotetrazines. Their antitumor activities were evaluated against A-549 and P388 cells in vitro. The results showed several compounds to be endowed with cytotoxicity in the low micromolar range. Two compounds were highly effective against A-549 cell and IC₅₀ values were 0.575 and 2.08 μM, respectively. Three-dimensional quantitative structure–activity relationship (3D-QSAR) studies of comparative molecular field analysis (CoMFA) and comparative molecular similarity indices analysis (CoMSIA) were carried out on 37 1,2,4,5-tetrazine derivatives with antitumor activity against A-549 cell. Models with good predictive abilities were generated with the cross validated q² values for CoMFA and CoMSIA being 0.744 and 0.757, respectively. Conventional r² values were 0.978 and 0.988, respectively, the predicted R² values were 0.916 and 0.898, respectively. The results provide the tool for guiding the design and synthesis of novel and more potent tetrazine derivatives.     

Screening for Antioxidants of Microbial Origin

Asymmetric hydrolysis of (dl)-1-acyloxy-2-halo-1-phenylethanes by lipoprotein lipase Amano P from Pseudomonas fluorescens and the lipase from Chromobacterium viscosum afforded the optically active (R) residual substrates and (S)-2-halo-1-hydroxy-1-phenylethanes in 100% enantiomeric excess (e.e.). The length of acyl residues from acetyl to octanoyl in the substrates did not influence the enantioselectivity.

Both enantiomers of optically active styrene oxides were synthesized from the enzymatic products.     

Real‐Time Investigation of Intercalation and Structure Evolution in Printed Polymer:Fullerene Bulk Heterojunction Thin Films

The complex intermixing morphology is critical for the performance of the nanostructured polymer:fullerene bulk heterojunction (BHJ) solar cells. Here, time resolved in situ grazing incidence X‐ray diffraction and grazing incidence small angle X‐ray scattering are used to track the structure formation of BHJ thin films formed from the donor polymer poly(2,5‐bis(3‐hexadecylthiophen‐2‐yl)thieno[3,2‐b]thiophene) with different fullerene derivative acceptors. The formation of stable bimolecular crystals through the intercalation of fullerene molecules between the side chains of polymer crystallites is investigated. Such systems exhibit more efficient exciton dissociation but lower photo‐conductance and faster decay of charges. On the basis of the experimental observations, intercalation obviously takes place before or with the formation of the crystalline polymer domains. It results in more stable structures whose volume remains constant upon further drying. Three distinct periods of drying are observed and the formation of unidimensional fullerene channels along the π‐stacking direction of polymer crystallites is confirmed.