Raman spectroscopic and X-ray diffraction studies of the effect of temperature and Ca2+ on phosphatidylethanolamine dispersions

Raman spectroscopy and X-ray diffraction are used to study the effect of heat and Ca²⁺ on dimyristoylphosphatidylethanolamine dispersions. Unlike phosphatidylcholine dispersions, dimyristoylphosphatidylethanolamine bilayers (at pH 8) require heating above T_m in order for hydration to occur and apparently bind Ca²⁺ at very low levels. These results are related to models for membrane fusion.     

Isolation of glucosinolate degrading microorganisms and their potential for reducing the glucosinolate content of rapemeal

Abstract K88ab fimbriae are filamentous protein structures at the surface of certain enterotoxigenic Escherichia coli strains. Electron microscopy analysis of K88ab fimbriae showed that these structures have different morphological appearances dependent on the medium in which cells expressing these fimbriae or in which purified fimbriae were suspended. Thin and curled structures, thin and flexible fimbriae, a wider and rigid form of the fimbriae, and, in addition, paracrystalline structures were detected. Optical diffraction analysis of the paracrystalline structures indicated a helical conformation of K88ab fimbriae.     

Crystallographic,morphological and photoluminescent investigations of Tb3+-doped YAlO3 perovskites for lighting applications

Terbium(III)-doped yttrium aluminate perovskite (YAP:xTb³⁺) (x = 0.01–0.08 mol) was synthesized using a simple gel-combustion method. Structural elucidations were performed using X-ray diffraction (XRD) and Rietveld analysis. Fourier-transform infrared spectral studies validated the efficient synthesis of designed doped samples. Transmission electron microscopic images showed the agglomerated irregular dimensions of the synthesized nanocrystalline materials. When excited at 251 nm, a strong emissive line attributed to ⁵D₄ → ⁷F₅ electronic transition was observed at 545 nm (green emission). The maximum luminescence was found at the optimized concentration (0.05 mol) of Tb³⁺ ions; this emission was quenched by dipolar–dipolar (d–d) interactions. Chromaticity (x and y) and correlated colour temperature parameters were obtained by analysing the emission profiles. Finally, the colour coordinates of nanophosphors were closer to the National Television Standards Committee green coordinates, which replicates their potency in the design and architecture of R-G-B-based white LEDs.     

Crystallization and preliminary X-ray analysis of nonglycosylated tissue inhibitor of metalloproteinases-1, N30QN78Q TIMP-1

A nonglycosylated (N₃₀QN₇₈Q) form of the human tissue inhibitor of metalloproteinases, TIMP-1, has been prepared and crystallized in a form suitable for X-ray diffraction analysis. Small single crystals have been grown using sodium tartrate as a precipitant. The crystals are in space group P2₁, with cell dimensions a = 35.28, b = 53.95, c = 48.56, and β = 96.0°. There is a single molecule of TIMP-1 in the asymmetric unit. The crystals diffract to at least 2.3 Å resolution. Complete data have been collected to 2.9 Å and a search for heavymetal derivatives is in progress. © 1993 Wiley-Liss, Inc.     

Purification,crystallization, and preliminary X-ray studies on the rhizome lectin from stinging nettle and its complex with NN′N″-triacetylchitotriose

Single crystals were grown from affinity-purified stinging nettle lectin and from its complex with the specific trisaccharide NN′N″ -triacetylchitotriose by vapor diffusion at room temperature. The lectin crystallizes in space group P2₁2₁2₁ with unit cell dimensions a = 54.3 (1) Å, b = 62.2 (1) Å, and c = 92.4 (2) Å, and diffracts to 3.0 Å resolution. The asymmetric unit contains three lectin monomers. The crystals of the lectin-trisaccharide complex have space group P2₁2₁2₁ with cell constants a = 37.69 (4) Å, b = 48.97 (6) Å, and c = 57.32 (4) Å. These crystals diffract to at least 2.0 Å resolution and the asymmetric unit contains one lectin monomer. A three-dimensional X-ray structure determination is on its way. © 1993 Wiley-Liss, Inc.     

Preferred conformation of peptides rich in Ac8c,a medium-ring alicyclic Cα,α-disubstituted glycine

A complete series of terminally blocked, monodispersed homo-oligopeptides (to the pentamer level) from the sterically demanding, medium-ring alicyclic C^α,α-disubstituted glycine 1-aminocyclooctane-1-carb oxylic acid (Ac₈c), and two Ala/Ac₈c tripeptides, were synthesized by solution methods and fully characterized. The preferred conformation of all the oligopeptides was determined in deuterochloroform solution by IR absorption and ¹H-NMR. The molecular structures of the amino acid derivative Z-Ac₈c-OH, the dipeptide pBrBz- (Ac₈c)₂-OH and the tripeptide pBrBz-(Ac₈c)₃-OtBu were assessed in the crystal state by X-ray diffraction. Conformational energy computations were performed on the monopeptide Ac-Ac₈c-NHMe. Taken together, the results obtained strongly support the view that the Ac₈c residue is an effective β-turn and helix former. A comparison is also made with the conformational preferences of α-aminoisobutyric acid, the prototype of C^{α, α}-disubstituted glycines, and of the other members of the family of 1-aminocycloalkane-1-carboxylic acids (Ac_nc, with n=3, 5–7) investigated so far. The implications for the use of the Ac₈c residue in peptide conformational design are considered.     

Design of Peptides Using α,β-Dehydro-residues: Synthesis,Crystal Structure and Molecular Conformation of N-Boc-L-Val-ΔPhe–ΔPhe-L-Ala-OCH3

To obtain general rules of peptide design using α,β-dehydro-residues, a sequence with two consecutive ΔPhe-residues, Boc-L -Val-ΔPhe–ΔPhe- L -Ala-OCH₃, was synthesized by azlactone method in solution phase. The peptide was crystallized from its solution in an acetone/water mixture (70:30) in space group P6₁ with a=b=14.912(3) Å, c= 25.548(5) Å, V=4912.0(6) ų. The structure was determined by direct methods and refined by a full matrix least-squares procedure to an R value of 0.079 for 2891 observed [I?3σ(I)] reflections. The backbone torsion angles ?₁=?54(1)°, ψ₁= 129(1)°, ω₁=?177(1)°, ?₂ =57(1)°, ψ₂=15(1)°, ω₂ =?170(1)°, ?₃=80(1)°, ψ₃ =7(2)°, ω₃=?177(1)°, ?₄ =?108(1)° and ψ^T₄=?34 (1)° suggest that the peptide adopts a folded conformation with two overlapping β-turns of types II and III′. These turns are stabilized by two intramolecular hydrogen bonds between the CO of the Boc group and the NH of ΔPhe³ and the CO of Val¹ and the NH of Ala⁴. The torsion angles of ΔPhe² and ΔPhe³ side chains are similar and indicate that the two ΔPhe residues are essentially planar. The folded molecules form head-to- tail intermolecular hydrogen bonds giving rise to continuous helical columns which run parallel to the c-axis. This structure established the formation of two β-turns of types II and III′ respectively for sequences containing two consecutive ΔPhe residues at (i+2) and (i+3) positions with a branched β-carbon residue at one end of the tetrapeptide.     

Crystallization and preliminary X-ray diffraction studies of aSFP, a bovine seminal plasma protein with a single CUB domain architecture.

Bovine acidic seminal fluid protein (aSFP) is a 1.29 kDa polypeptide of the spermadhesin family built by a single CUB domain architecture. The CUB domain is an extracellular module present in 16 functionally diverse proteins. To determine the three-dimensional structure of aSFP, the protein was crystallized at 21 degrees C by vapor diffusion in hanging drops, using ammonium sulfate, pH 4.7, and polyethyleneglycol 4,000 as precipitants, containing 10% dioxane to avoid the formation of clustered crystals. Elongated prismatic crystals with maximal size of 0.6 x 0.3 x 0.2 mm3 diffract to beyond 1.9 A resolution and belong to space group P2(1)2(1)2(1), with cell parameters a = 52.4 A, b = 41.5 A, c = 48.2 A. There is one aSFP molecule per asymmetric unit, which corresponds to a crystal volume per unit molecular mass of 2.04 A3/Da, and analytical ultracentrifugation analysis show that aSFP is a monomeric protein.     

Characterization and crystallization of human uroporphyrinogen decarboxylase.

The cytosolic enzyme uroporphyrinogen decarboxylase (URO-D) catalyzes the fifth step in the heme biosynthetic pathway, converting uroporphyrinogen to coproporphyrinogen by decarboxylating the four acetate side chains of the substrate. Recombinant human URO-D has been expressed in Escherichia coli with a histidine tag and has been purified to homogeneity. Purified protein was determined to be a monodisperse dimer by dynamic light scattering. Equilibrium sedimentation analysis confirmed that the protein is dimeric, with a dissociation constant of 0.1 microM. URO-D containing an amino-terminal histidine tag was crystallized in space group P3(1)21 or its enantiomer P3(2)21 with unit cell dimensions a = b = 103.6 A, c = 75.2 A. There is one molecule in the asymmetric unit, consistent with generation of the dimer by the twofold axis of this crystallographic operator. Native data have been collected to 3.0 a resolution.     

Crystallization of the first three domains of the human insulin-like growth factor-1 receptor.

The insulin-like growth factor-1 receptor (IGF-1R) is a tyrosine kinase receptor of central importance in cell proliferation. A fragment (residues 1-462) comprising the L1-cysteine rich-L2 domains of the human IGF-1R ectodomain has been overexpressed in glycosylation-deficient Lec8 cells and has been affinity-purified via a c-myc tag followed by gel filtration. The fragment was recognized by two anti-IGF-1R monoclonal antibodies, 24-31 and 24-60, but showed no detectable binding of IGF-1 or IGF-2. Isocratic elution of IGF-1R/462 on anion-exchange chromatography reduced sample heterogeneity, permitting the production of crystals that diffracted to 2.6 A resolution with cell dimensions a = 77.0 A, b = 99.5 A, c = 120.1 A, and space group P2(1)2(1)2(1).