Cu3P Binary Phosphide: Synthesis via a Wet Mechanochemical Method and Electrochemical Behavior as Negative Electrode Material for Lithium‐Ion Batteries

Mechanochemical synthesis of Cu₃P in the presence of n‐dodecane results in a material with a secondary particle size distribution of 10 μm, secondary particles which consist of homogeneously agglomerated 20 nm primary particles. The electrochemical performance of Cu₃P with lithium is influenced by the reaction depth, in other words by the lower potential cut‐off. During the electrochemical reaction, the displacement of copper by lithium from the Cu₃P structure until the formation of Li₃P and Cu deteriorates the capacity retention. Improved performance was obtained when the charge potential was limited to 0.50 V (vs. Li/Li⁺) and the formation of the Li_xCu_3‐xP phase (0 ≤ × ≤ 2). In this case, when the potential is limited to 0.5 V, the capacity is stable for more than 50 cycles. Acceptable electrochemical performances in Li‐ion cells within the voltage range 0.50–2.0 V (vs. Li/Li⁺) were shown when Cu₃P was used as an anode and Li_1.2(Ni_0.13Mn_0.54Co_0.13)O₂ and LiNi_0.5Mn_1.5O₄ as positive electrode materials.     

Si‐Encapsulating Hollow Carbon Electrodes via Electroless Etching for Lithium‐Ion Batteries

Remarkable improvements in the electrochemical performance of Si materials for Li‐ion batteries have been recently achieved, but the inherent volume change of Si still induces electrode expansion and external cell deformation. Here, the void structure in Si‐encapsulating hollow carbons is optimized in order to minimize the volume expansion of Si‐based anodes and improve electrochemical performance. When compared to chemical etching, the hollow structure is achieved via electroless etching is more advanced due to the improved electrical contact between carbon and Si. Despite the very thick electrodes (30 ～ 40 μm), this results in better cycle and rate performances including little capacity fading over 50 cycles and 1100 mA h g^?1 at 2C rate. Also, an in situ dilatometer technique is used to perform a comprehensive study of electrode thickness change, and Si‐encapsulating hollow carbon mitigates the volume change of electrodes by adoption of void space, resulting in a small volume increase of 18% after full lithiation corresponding with a reversible capacity of about 2000 mA h g^?1.     

Influence of organic additives on the incidence of root-knot nematode,Meloidogyne javanica in roots of tomato plants

Glasshouse experiment was conducted to assess the impact of green chopped leaves of four test plants (Lantana camara, Ficus virens, Kigelia pinnata and Ficus bengalensis) and two nematicides (Phorate and Carbofuran) on the plant growth parameters of tomato cv. K25 and on the root-knot development. Results revealed that all the tested treatments significantly (p = 0.05) improved plant growth parameters and reduced root-knot development compared to control. Among the tested organic additives, chopped green leaves of Lantana camara added to soil gave the highest enhancement in plant growth parameters, including plant height, fresh and dry weight, number of fruits and fruit weight with the values of 94.2 cm, 106.8 g, 31.6 g, 7.2 and 153.3 g respectively, as well as a greater reduction of Meloidogyne javanica reproduction and development but exhibiting a lower response compared to nematicides. There was also significant reduction in root-knot development in tomato plants growing in other organic additive amended soil.     

The Effects of Silicone Fluid Additives and Silicone Elastomer Matrices on Barnacle Adhesion Strength

Barnacle adhesion strength was used to screen seventy-seven polydimethylsiloxane elastomeric coatings for fouling-release properties. The test coatings were designed to investigate the effect on barnacle adhesion strength of silicone fluid additive type, additive location, additive molecular weight, additive loading level, mixtures of additives, coating matrix type and coating fillers. The type of silicone fluid additive was the primary controlling factor in barnacle fouling-release. The type of silicone matrix in which the fluid resided was found to alter the effect on fouling-release. Two PDMS fluids, DMSC15 and DBE224, significantly reduced the adhesion strength of barnacles compared to unmodified elastomers. Optimum fouling-release performance was dependent on the interaction of fluid type and elastomeric matrix.     

Vom Ruhr Zoo zur ZOOM Erlebniswelt III: Der Bauabschnitt Asien

In the Zoom Erlebniswelt Gelsenkirchen the third and last biogeographical area dedicated to the Asian fauna was opened in March 2010 covering a total area of five hectares. In May 2013 a new enclosure for tigers was added. The emphasis of the Asia area lies on a 4700 m² tropical hall with mammals and birds, and Asian gastronomic facilities as well. Included is a mixed species exhibit for orangutans (Pongo abelii), northern plains grey langurs (Semnopithecus entellus) and Asian small clawed otters (Aonyx cinerea). Along a 1.3 km outside path enclosures for some species of colder climates were built, too. The transformation of the former Ruhr Zoo Gelsenkirchen to the modern ZOOM Erlebniswelt herewith is brought to a close.     

Electrotonic and action potentials in the Venus flytrap

The electrical phenomena and morphing structures in the Venus flytrap have attracted researchers since the nineteenth century. We have observed that mechanical stimulation of trigger hairs on the lobes of the Venus flytrap induces electrotonic potentials in the lower leaf. Electrostimulation of electrical circuits in the Venus flytrap can induce electrotonic potentials propagating along the upper and lower leaves. The instantaneous increase or decrease in voltage of stimulating potential generates a nonlinear electrical response in plant tissues. Any electrostimulation that is not instantaneous, such as sinusoidal or triangular functions, results in linear responses in the form of small electrotonic potentials. The amplitude and sign of electrotonic potentials depend on the polarity and the amplitude of the applied voltage. Electrical stimulation of the lower leaf induces electrical signals, which resemble action potentials, in the trap between the lobes and the midrib. The trap closes if the stimulating voltage is above the threshold level of 4.4 V. Electrical responses in the Venus flytrap were analyzed and reproduced in the discrete electrical circuit. The information gained from this study can be used to elucidate the coupling of intracellular and intercellular communications in the form of electrical signals within plants.     

Development of a multiple-bile-ion-sensing membrane electrode

A multiple-bile-ion-sensing polyvinyl chloride-based membrane electrode capable of monitoring any of the three common bile ions in humans, namely, cholate, deoxycholate, and chenodeoxycholate, was developed and characterized. Compared to single-bile-ion-sensing electrodes, it showed a sub-Nernstian response. All other electrode properties were, however, similar, making this a successful replacement for three individual electrodes. With appropriate conditioning, this electrode could repeatedly change selectivity without losing membrane activity. It was reproducible, was stable for 5 months, had low response time, and could be used to measure critical micelle concentrations. The lower limit of detection was 10 nM. Selectivity coefficients for various anions with respect to bile ions more or less followed the Hoffmeister series. Plots of R ((Nernst equivalent of slope in the presence of primary ion and a fixed amount of interfering ion)/(slope in the presence of only the primary ion)) vs square root of ionic strength for an interfering ion were linear. One major application of this electrode is its use in kinetics. We have tested its ability to monitor continuously changing bile ion concentrations during their interactions with a biocompatible polymer, polyethylene glycol (6000), and determined rate constants.     

Characterisation of H+ and Cu2+ binding to humic and fulvic acids

Abstract

The nature of H⁺ and Cu²⁺ binding by soil-derived humic (HA) and fulvic (FA) acid was characterised using potentiometric titrations. The experimental data obtained showed that the derived proton balance equation was valid and capable of describing proton consumption by both polyelectrolytes. HA was found to be more acidic and more reactive as shown by its lower equivalent weight compared to FA. Acid consumption by HA during titrations was little affected at ionic strength (μ) up to 0.1 M although it was enhanced at higher μ. Displacement of protons by Cu²⁺ resulted in a nonlinear sigmoidal pattern suggesting the formation of different Cu-HA chelates, or existence of sites that differed in their affinities for Cu on the ligand. Different concentrations of added Cu appeared to favour one or both mechanisms, although the titration method could not differentiate which of the probable mechanisms was more dominant at a specific level of Cu added. Similar values were obtained for conditional stability constants using either the equation of Scatchard or Ruzic.     

In vitro–in vivo study on the effects of plant compounds on rumen fermentation,microbial abundances and methane emissions in goats

Two in vitro and one in vivo experiments were conducted to investigate the effects of a selection of plant compounds on rumen fermentation, microbial concentration and methane emissions in goats. Treatments were: control (no additive), carvacrol (CAR), cinnamaldehyde (CIN), eugenol (EUG), propyl propane thiosulfinate (PTS), propyl propane thiosulfonate (PTSO), diallyl disulfide (DDS), a mixture (40 : 60) of PTS and PTSO (PTS+PTSO), and bromochloromethane (BCM) as positive control with proven antimethanogenic effectiveness. Four doses (40, 80, 160 and 320 µl/l) of the different compounds were incubated in vitro for 24 h in diluted rumen fluid from goats using two diets differing in starch and protein source within the concentrate (Experiment 1).The total gas production was linearly decreased (P<0.012) by all compounds, with the exception of EUG and PTS+PTSO (P⩾0.366). Total volatile fatty-acid (VFA) concentration decreased (P⩽0.018) only with PTS, PTSO and CAR, whereas the acetate:propionate ratio decreased (P⩽0.002) with PTS, PTSO and BCM, and a tendency (P=0.064) was observed for DDS. On the basis of results from Experiment 1, two doses of PTS, CAR, CIN, BCM (160 and 320 µl/l), PTSO (40 and 160 µl/l) and DDS (80 and 320 µl/l) were further tested in vitro for 72 h (Experiment 2). The gas production kinetics were affected (P⩽0.045) by all compounds, and digested NDF (DNDF) after 72 h of incubation was only linearly decreased (P⩽0.004) by CAR and PTS. The addition of all compounds linearly decreased (P⩽0.009) methane production, although the greatest reductions were observed for PTS (up to 96%), DDS (62%) and BCM (95%). No diet–dose interaction was observed. To further test the results obtained in vitro, two groups of 16 adult non-pregnant goats were used to study in vivo the effect of adding PTS (50, 100 and 200 mg/l rumen content per day) and BCM (50, 100 and 160 mg/l rumen content per day) during the 9 days on methane emissions (Experiment 3). The addition of PTS and BCM resulted in linear reductions (33% and 64%, respectively, P⩽0.002) of methane production per unit of dry matter intake, which were lower than the maximum inhibition observed in vitro (87% and 96%, respectively). We conclude that applying the same doses in vivo as in vitro resulted in a proportional lower extent of methane decrease, and that PTS at 200 mg/l rumen content per day has the potential to reduce methane emissions in goats. Whether the reduction in methane emission observed in vivo persists over longer periods of treatments and improves feed conversion efficiency requires further research.