A technique for the long-term application of surface electrodes

A technique is reported for the long-term application of surface electrodes for ambulatory electromyographic (EMG) recording. Prior to electrode application the surrounding skin is lightly painted with tincture of benzoin. This treatment improves adherence to the skin of disposable electrodes and electrode attachment collars, reduces skin trauma associated with electrode removal, and minimizes sensitivity to electrode adhesives.This research was supported in part by NIH grant No. NS25114.     

Intraspecific variation in the response of rice (Oryza sativa) to increased CO2– photosynthetic, biomass and reproductive characteristics

Two rice ( Oryza sativa L.) cultivars of contrasting morphologies, IR-36 and Fujiyama-5, were exposed to ambient (360 μl l⁻¹) and ambient plus 300 μl l⁻¹ CO₂ from time of emergence until ca 50% grain fill at the Duke University Phytotron, Durham, North Carolina. Exposure to increased CO₂ resulted in about a 50% increase in the photosynthetic rate for both cultivars and photosynthetic enhancement was still evident after 3 months of exposure to a high CO₂ environment. The photosynthetic response at 5% CO₂ and the response of CO₂ assimilation (A) to internal CO₂ (C_i) suggest a reallocation of biochemical resources from RuBP carboxylation to RuBP regeneration. Increases in total plant biomass at elevated CO₂ were approximately the same in both cultivars, although differences in allocation patterns were noted in root/shoot ratio. Differences in reproductive characteristics were also observed between cultivars at an elevated CO₂ environment with a significant increase in harvest index for IR-36 but not for Fujiyama-5. Changes in carbon allocation in reproduction between these two cultivars suggest that lines of rice could be identified that would maximize reproductive output in a future high CO₂ environment.     

Studies on the effects of the antitumor agent camptothecin and derivatives on DNA. Camptothecin potentiated cleavage of DNA by bleomycin in vitro

Addition of sodium camptothecin (2a, Fig. 1) in comparable low concentrations to the glycopeptide antitumor antibiotic bleomycin (BLM) leads to enhanced rates of single-strand scission of PM2-covalently closed circular DNA, whereas sodium camptothecin alone has no effect. A similar enhancement of DNA scission by sodium camptothecin is produced with the 1 : 1 bleomycin-iron complex alone or in conjunction with NADPH as an additional reductant. The interpretation that camptothecin may substitute for the reducing requirement of the antibiotic is supported by its oxidation at 37°C by the 1 : 1 bleomycin iron complex, by iron salts or more efficiently by hydrogen peroxide to the known hemiacetal (3, Fig. 1).Electrochemical studies of 2a, its analogues and selected model compounds established that the α-pyridone ring D is most susceptible to a one-electron reduction at a reversible potential of ?0.95 ± 0.01 V. The reduced camptothecin is a transient species readily capable of donating an electron. This process may by compatible with a coupled reduction of the sequestered Fe(III) in the glycopeptide antibiotic necessary for the expression of antibiotic and antitumor properties. The results may provide a mechanistic rationale for the observed potentiation of the antitumor activity of bleomycin by camptothecin in vivo.     

An Antiaging Electrolyte Additive for High‐Energy‐Density Lithium‐Ion Batteries

High‐capacity Li‐rich layered oxide cathodes along with Si‐incorporated graphite anodes have high reversible capacity, outperforming the electrode materials used in existing commercial products. Hence, they are potential candidates for the development of high‐energy‐density lithium‐ion batteries (LIBs). However, structural degradation induced by loss of interfacial stability is a roadblock to their practical use. Here, the use of malonic acid‐decorated fullerene (MA‐C₆₀) with superoxide dismutase activity and water scavenging capability as an electrolyte additive to overcome the structural instability of high‐capacity electrodes that hampers the battery quality is reported. Deactivation of PF₅ by water scavenging leads to the long‐term stability of the interfacial structures of electrodes. Moreover, an MA‐C₆₀‐added electrolyte deactivates the reactive oxygen species and constructs an electrochemically robust cathode‐electrolyte interface for Li‐rich cathodes. This work paves the way for new possibilities in the design of electrolyte additives by eliminating undesirable reactive substances and tuning the interfacial structures of high‐capacity electrodes in LIBs.     

A Review on Additives for Halide Perovskite Solar Cells

Additives are widely adopted for efficient, stable, and hysteresis‐free perovskite solar cells and play an important role in various breakthroughs of perovskite solar cells (PSCs). Herein the various additives adopted for PSCs are reviewed and their functioning mechanism and influence on device performance is described. The main roles of additives, modulating morphology of perovskite films, stabilizing phase of formamidinium (FA) and cesium (Cs)‐based perovskites, adjusting energy level alignment in PSCs, suppressing nonradiative recombination in perovskites, eliminating hysteresis, enhancing operational stability of PSCs, are summarized.     

Redox‐Active Organic Compounds for Future Sustainable Energy Storage System

Utilizing redox‐active organic compounds for future energy storage system (ESS) has attracted great attention owing to potential cost efficiency and environmental sustainability. Beyond enriching the pool of organic electrode materials with molecular tailoring, recent scientific efforts demonstrate the innovations in various cell chemistries and configurations. Herein, recent major strategies to build better organic batteries, are highlighted: diversifying charge‐carrying ions, modifying electrolytes, and utilizing liquid‐type organic electrodes. Each approach is summarized along with their advantages over Li‐ion batteries (LIBs). An outlook is also provided on the practical realization of organic battery systems, which hints at possible solutions for future sustainable ESSs.     

Molecularly imprinted polyaniline molecular receptor–based chemical sensor for the electrochemical determination of melamine

Molecularly imprinted polymer‐modified glassy carbon electrode (GCE)‐based electrochemical sensor is prepared using the electropolymerization of aniline in the presence of melamine (MA) as a template. In this work, the advantages of molecularly imprinted conducting polymers (MICPs) and electroanalytical methods were combined to obtain an electronic device with better performances. The sensor performance was evaluated by cyclic voltammetry (CV) and square wave voltammetry (SWV) with the linear range of 0.6‐16 × 10^?9M, quantification limit of 14.9 × 10^?10M, and detection limit of 4.47 × 10^?10M (S/N = 3). The selectivity of the sensor was tested in the presence of acetoguanamine (AGA), diaminomethylatrazine (DMT), casein, histidine, and glycine interfering molecules taken at the triple concentration with MA that demonstrated too small current response compared with that of the analyte indicating high specificity of the sensor towards the template. The sensor was successfully applied to determine MA in infant formula samples with significant recovery greater than 96% and relative standard deviation (RSD) less than 4.8%. Moreover, the good repeatability, recyclability, and stability make this sensor device promising for the real‐time monitoring of MA in different food stuffs.     

Dietary intake of artificial food color additives containing food products by school-going children

Nutritional risk in children is associated with food safety. This is the first study to identify the food type consumed by 6–17-year-old school-going children in Saudi Arabia. Eight permitted artificial food color additives, including Tartrazine (E102), Sunset Yellow (E110), Carmoisine (E122), Allura Red (E129), Indigo Carmine (E132), Brilliant Blue (E133), Fast Green (E143), and Black PN (E151), and two non-permitted ones, Erythrosine (E127) and Red 2G (E128), were determined using 24-h dietary recall questionnaires. Artificial color additives in 839 food products were divided into nine categories, including biscuits, cakes, chocolates, chips, ice cream, juices and drinks, candy, jelly, and chewing gum, are determined using high performance liquid chromatography and diode array detector. The results indicated a high intake of juices and drinks, ice cream, and cakes, but low consumption of chewing gum among school-going children. Among the permitted artificial food color additives, Brilliant Blue (E133) (54.1%) and Tartrazine (E102) (42.3%) were the most commonly used. Sunset Yellow (E110) in one chocolate sample, Tartrazine (E102) and Sunset Yellow (E110) in one and two juice and drink samples, respectively, and Brilliant Blue (E133) in two candy samples exceeded the permitted level. Therefore, further investigations are needed to provide insights into the possible adverse health effects of high intake of these additives in artificial food coloring on the test population are warranted.     

Reduction of Nitrate in Agricultural Soils by Bio-electrokinetics

High nitrate concentration in surface soils is a serious concern for the agricultural industry throughout the world. Nitrate reduction can be achieved by chemical or biological processes; however, these processes are difficult to achieve in-situ because of the low permeability of clays. This study evaluates bio-electrokinetic processes for nitrate treatment in low-permeability soils. The concept is based on using iron electrodes to generate an electric field and a reducing environment in the soil to facilitate nitrate reduction by existing bacteria. Experiments were conducted using starch as an additive for microbial activity in the anolyte. Three sets of experiments were conducted under 0.5, 1.0, and 2.0 V cm^?1 voltage gradient, and using starch as an anolyte for enhancing existing microbial activity in the soil. Initial nitrate concentration in the soil (agricultural soil collected from Jinju, Korea) was between 782 and 800 mg kg^?1. Removal of 100% nitrate was achieved in the soil under 0.5 and 1.0 V cm^?1 due to the combined effect of biological and iron reduction. A control experiment with iron electrodes, but without starch, was not as effective. Ammonium was also effectively removed by the combined action of starch and iron under 0.5 and 1.0 V cm^?1. The role of starch with iron on the nitrate and ammonium removal process is evaluated along with the role of transport by electro-osmosis and electro-migration. The bacterial action on denitrification and nitrification is assessed and the relationship between pH and the efficiency of nitrate reduction in the bio-EK systems is evaluated.     

Fused Heteroaromatic Organic Compounds for High‐Power Electrodes of Rechargeable Lithium Batteries

Organic redox compounds are emerging electrode materials for rechargeable lithium batteries. However, their electrically insulating nature plagues efficient charge transport within the electroactive bulk. Alternative to the popular solution of elaborating nanocomposite materials, herein we report on a molecular‐level engineering strategy towards high‐power organic electrode materials with multi‐electron reactions. Systematic comparisons of anthraquinone analogues incorporating fused heteroaromatic structures as cathode materials in rechargeable lithium batteries reveal that the judicious incorporation of heteroaromatics improves the cell performance in terms of specific gravimetric capacity, working potential, rate capability, and cyclability. Combination studies with morphological observation, electrochemical impedance characterization, and theoretical modeling provide insight into the advantage of heteroaromatic building blocks. In particular, benzofuro[5,6‐b]furan‐4,8‐dione ( BFFD ) bearing furan moeities shows a reversible capacity of 181 mAh g^?1 when charged/discharged at 100C, corresponding to a power density of 29.8 kW kg^?1. These results have pointed to a general design route of high‐rate organic electrode materials by rational functionalization of redox compounds with appropriate heteroaromatic units as versatile structural tools.