How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

Variants of the Varimax Rotation Method

In the present paper we present an example proving that the Varimax rotation method commonly used in factor analysis (see H. F. KAISER, 1958) need not give a unique solution. We also show that changing the original algorithm more than one local maximum of the criterion “V” can be achieved. Hence the loadings of factors and practical interpretations of solutions are affected in this way.     

GRF-induced feeding: Evidence for protein selectivity and opiate involvement

Growth hormone-releasing factor (GRF) is a hypothalamic peptide named for its ability to induce release of growth hormone from the anterior pituitary. GRF also acts as a neurotransmitter in the suprachiasmatic nucleus/medial preoptic area (SCN/MPOA) to stimulate food intake. The purpose of this series of experiments was to explore the nature of GRF-induced feeding, with a particular emphasis on macronutrient selectivity, and to examine the role of opiate activity in the paraventricular nucleus of the hypothalamus (PVN). Chow intake stimulated by GRF microinjection (1 pmol/0.5 μl) into the SCN/MPOA was blocked by injection of methyl-naltrexone (3 μg/0.5 μl) into the PVN. In animals habituated to macronutrient diets (Teklad, WI), GRF preferentially stimulated intake of protein at 2 and 4 h postinjection, whereas it had no effect on carbohydrate intake. Further, this effect was blocked by injection of naloxone (40 nmol/0.5 μl) into the PVN. Microinjection of morphine (0, 1, 10, and 17 μg/0.5 μl) into the PVN also specifically stimulated protein intake at 2 and 4 h postinjection. These results suggest that feeding derived from GRF actions in the SCN/MPOA is macronutrient selective, and is dependent on PVN opiate activity for expression.     

Seasonal changes of the ultrastructure of the pars tuberalis of the hypophysis of Rana temporaria

Summary In the pars tuberalis of the hypophysis of Rana temporaria, which shows the ultrastructural characteristics of a polypeptide hormone secreting endocrine gland, seasonal changes of the ultrastructure are described. In accordance with the literature, these seasonal changes of ultrastructure are interpreted as the morphological expression of seasonal changes of endocrine activity of the pars tuberalis.     

Determination of ovulation and pregnancy in the marmoset (Callithrix jacchus) by monitoring of urinary hydroxypregnanolone excretion

In Callithrix jacchus the urinary excretion of hydroxypregnanolone (5 alpha-pregnane-3 alpha, 7 alpha-diol-20-one) shows a luteal rise during the ovulatory cycle. This progesterone metabolite can therefore be used as an indication of ovulation, implantation, and subsequently for the persistence of the pregnancy. The excretion can be monitored by high performance thin-layer chromatography (HPTLC) and postchromatographic derivatization after enzymatic hydrolysis of the conjugate. Profiles of urinary hydroxypregnanolone levels are presented and correlated with luteinizing hormone excretion. The method is noninvasive and therefore suited for long-term studies in these monkeys.     

An Estimation Procedure for the Joint Distribution of Spatial Direction and Thickness of Flat Bodies Using Vertical Sections. Part II: An application in soil micromorphology

In soil micromorphology fissures are considered in vertical sections. To get information about the properties of the soil the joint distribution of spatial direction and width of these fissures is of interest. The fissures are mathematically generalized to flat bodies which are defined as stationary weighted surface processes with the weight “thickness”. In a typical point of the surface process suitable, joint parametric distributions of direction and thickness are assumed. The parameters have to be estimated from measurements on vertical sections which are taken from the soil. On these sections only a visible thickness and a visible angle can be observed. The joint distribution of these variables can be expressed by the joint distribution of spatial direction and thickness with the same parameters and in this indirect way the parameters can be estimated. The paper describes how to randomize the vertical section and how to measure the visible variables on the sections. The Chi-Square method is proposed for the parameter estimation. Further it is discussed how to derive good starting values for the numerical procedure. All this is demonstrated in a simulation study using the Bingham-Mardia distribution for the direction and the lognormal distribution for the thickness including a way to correlate the mean thickness and the direction. Finally an application in soil micromorphology is demonstrated for one soil horizon.     

The effect of behavioural and morphological plasticity on foraging efficiency in the threespine stickleback (Gasterosteus sp.)

We conducted an experiment to assess the change in foraging efficiency resulting from diet-induced morphological and behavioural plasticity in a species of freshwater, threespine stickleback (Gasterosteus sp.). Different degrees of morphological and behavioural change were induced using two prey items commonly found in the diet of this species, allowing us to estimate the relative importance of each type of plasticity. The purpose of the experiment was twofold. First, earlier work had suggested that diet variability might be an important factor in the evolution of trophic morphological plasticity in sticklebacks. The present results extend this work by revealing the adaptive significance of morphological plasticity. The current experiment also qualitatively assessed the compatibility of the time scale of morphological change with that of the natural resource variability experienced by this species. The results indicate that diet-induced plasticity improves foraging efficiency continuously for up to 72 days of prey exposure. This is probably due in part to plasticity of the external trophic morphology but our results also suggest a complex interplay between morphology and behaviour. The time scale appears to be matched to that of natural diet variability although it is possible that some traits exhibit non-labile plasticity. Our discussion highlights the important distinction between conditions favouring the evolution of labile versus non-labile plasticity. The second objective of the experiment was to determine the relative importance of morphological and behavioural plasticity. Few studies have attempted to quantify the adaptive significance of morphological plasticity and no study to our knowledge has separated the effects of morphological and behavioural plasticity. Our experiment reveals that both behavioural and morphological plasticity are important and it also suggests a dichotomy between the two: behavioural plasticity predominately affects searching efficiency whereas morphological plasticity predominately affects handling efficiency.     

Biological rhythms in birds — development, insights and perspectives

The aim of this review is to show that probably the internal clock of precocial birds is imprinted in the prenatal period by exogenous factors (zeitgeber). The activity of organ functions occurs early during embryonic development, before this function is ultimately necessary to ensure the survival of the embryo. Prenatal activation of some functional systems may have a training effect on the postnatal efficiency.The development of physiological control systems is influenced by endogenous and exogenous factors during the late prenatal and early postnatal period: epigenetic adaptation processes play an important role in the development of animals; they have acquired characteristics which are innated but not genetically fixed. As a rule, the actual value during the determination period has a very strong influence on the set-point of the system. This will be explained using the example of thermoregulation.It is shown in detail that it seems to be possible to imprint the prenatal development of circadian rhythms by periodic changes of the light-dark cycle but not by rhythmic influence of acoustic signals.Altogether, there are more questions open than solved concerning the perinatal genesis of circadian rhythms in birds. Topics are given for the future research.     

Effect of arm-shoulder fatigue on carpenters at work

The purpose of the study was to analyse the effect of arm-shoulder fatigue on manual performance. Ten experienced carpenters performed three standardized tasks (nailing, sawing and screwing). Electromyographic activity was recorded from six arm-shoulder muscles and the performances were video-filmed. After 45 min of standardized arm-cranking (arm-shoulder-fatiguing exercise of approximately 70%-80% maximal oxygen consumption), the tasks were repeated. The number of work movements and the time taken for each task were recorded and the quality of the work performed was compared. After the fatiguing exercise, only nailing was perceived as being harder and more mistakes were made during nailing and sawing. Movement performance was not influenced during nailing but was slightly slower during sawing and faster during screwing. However, there were increased mean EMG amplitudes in the upper trapezius and biceps muscles during nailing, in the upper trapezius, anterior deltoid and infraspinatus muscles during sawing and in the anterior deltoid muscle during screwing. Of the muscles studied the upper trapezius and anterior deltoid muscles increased their activity most after the arm-shoulder-fatiguing exercise.