Transport protein synthesis in non-growing yeast cells

Addition of a metabolizable substrate (glucose, ethanol and, to a degree, trehalose) to non-growing baker's yeast cells causes a boost of protein synthesis, reaching maximum rate 20 min after addition of glucose and 40–50 min after ethanol or trehalose addition. The synthesis involves that of transport proteins for various solutes which appear in the following sequence: H⁺, l-proline, sulfate, l-leucine, phosphate, α-methyl-d-glucoside, 2-aminoisobutyrate. With the exception of the phosphate transport system, the K_t of the synthesized systems is the same as before stimulation. Glucose is usually the best stimulant, but ethanol matches it in the case of sulfate and exceeds it in the case of proline. This may be connected with ethanol's stimulating the synthesis of transport proteins both in mitochondria and in the cytosol while glucose acts on cytosolic synthesis alone. The stimulation is often repressed by ammonium ions (leucine, proline, sulfate, H⁺), by antimycin (proline, trehalose, sulfate, H⁺), by iodoacetamide (all systems tested), and by anaerobic preincubation (leucine, proline, trehalose, sulfate). It is practically absent in a respiration-deficient petite mutant, only little depressed in the op₁ mutant lacking ADP/ATP exchange in mitochondria, but totally suppressed (with the exception of transport of phosphate) in a low-phosphorus strain. The addition of glucose causes a drop in intracellular inorganic monophosphate by 30%, diphosphate by 45%, ATP by 70%, in total amino acids by nearly 50%, in transmembrane potential (absolute value) by about 50%, an increase of high-molecular-weight polyphosphate by 65%, of total cAMP by more than 100%, in the endogenous respiration rate by more than 100%, and a change of intracellular pH from 6.80 to 7.05. Ethanol caused practically no change in ATP, total amino acids, endogenous respiration, intracellular pH or transmembrane potential; a slight decrease in inorganic monophosphate and diphosphate and a sizeable increase in high-molecular-weight polyphosphate. The synthesis of the various transport proteins thus appears to draw its energy from different sources and with different susceptibility to inhibitors. It is much more stimulated in facultatively aerobic species (Saccharomyces cerevisiae, Endomyces magnusii) than in strictly aerobic ones (Rhodotorula glutinis, Candida parapsilosis) where an inhibition of transport activity is often observed after preincubation with metabolizable substrates.     

Impact on energy metabolism of quantitative and functional cyclosporine-induced damage of kidney mitochondria

In this study we have measured, under experimental conditions which maintained efficient coupling, respiratory intensity, respiratory control, oxidative phosphorylation capacity and protonmotive force. Succinate cytochrome-c reductase and cytochrome-c oxidase activities were also studied. These investigations were carried out using kidney mitochondria from cyclosporine-treated rats (in vivo studies) and from untreated rats in the presence of cyclosporine (in vitro studies). Inhibition of respiratory intensity by cyclosporine did not exceed 21.1% in vitro and 15.9% in vivo. Since there was no in vitro inhibition of succinate cytochrome-c reductase and cytochrome-c oxidase activities, the slowing of electron flow observed can be interpreted as a consequence of an effect produced by cyclosporine between cytochromes b and c₁. Cyclosporine had no effect on respiratory control either in vitro or in vivo. Statistically significant inhibition of the oxidative phosphorylation was observed both in vitro (6.6%) and in vivo (12.1%). Moreover, cyclosporine did not induce any change of membrane potential either in vivo or in vitro. Our findings show that cyclosporine is neither a protonophore, nor a potassium ionophore. In cyclosporine-treated rats we noticed a decrease of protein in subcellular fraction, including the mitochondrial fraction. The role of the inhibition respiratory characteristics by cyclosporine in nephrotoxicity in vivo must take account of these two parameters: inhibition of the respiratory characteristics measured in vitro and diminution of mitochondrial protein in cyclosporine-treated rats.     

Characterization of the unusual basic proteins of cricket spermatid nuclei on the basis of their molecular weights and amino acid compositions

Typical somatic cell type histones are lost from the nucleus during late spermiogenesis in the house cricket; they are replaced by unusual basic proteins specific to the spermatid. We wish to characterize these proteins because they appear to determine the unusual chromatin structures of the spermatid. Molecular weights of the unusual basic proteins were estimated by chromatographing them on Bio-Gel A 0.5 M agarose columns eluted with 6 M guanidine hydrochloride. Two proteins named TH1 and TH2 have molecular weights in the range spanned by the somatic histones. The molecular weight of TH1 is 17 500 and that of TH2 is 15 500. Three additional spermatid proteins were also analyzed by molecular weight determination. They are called here protamines A, B and C, and they have molecular weights in the range typical of protamines. That of A is 6200, of B is 5500 and of C is 3800. They span the range from the large protamines typical of mammalian sperm to the small protamines of salmonid fish. The molecular weights of the TH proteins were also examined by electrophoresis on SDS-polyacrylamide gels. Amino acid compositions determined for TH1 and TH2 show that both are basic proteins rich in arginine relative to lysine. Their compositions are histone-like, but they appear to be distinct histone types rather than variant forms of the somatic histones.     

Operation of a Benchtop Bioreactor

Fermentation systems are used to provide an optimal growth environment for many different types of cell cultures. The ability afforded by fermentors to carefully control temperature, pH, and dissolved oxygen concentrations in particular makes them essential to efficient large scale growth and expression of fermentation products. This video will briefly describe the advantages of the fermentor over the shake flask. It will also identify key components of a typical benchtop fermentation system and give basic instruction on setup of the vessel and calibration of its probes. The viewer will be familiarized with the sterilization process and shown how to inoculate the growth medium in the vessel with culture. Basic concepts of operation, sampling, and harvesting will also be demonstrated. Simple data analysis and system cleanup will also be discussed.     

The lifetime of molecular (Davydov) solitons

The lifetime of Davydov solitons in a one-dimensional system is studied theoretically. The process of thermalization and the properties of solitons at finite temperature are investigated and the processes of soliton creation and disintegration are discussed.     

Functional Casein-Poly saccharide Conjugates Prepared by Controlled Dry Heating

Casein was conjugated with dextran and galactomannan in a controlled dry state at a relative humidity of 79% and at 60°C for 24 hr. The covalent attachment of polysaccharides to casein was confirmed by SDS-PAGE and HPLC. The emulsifying activity of the casein-dextran and casein-galactomannan conjugates was 1.5 times higher than that of casein. The emulsion stability of the casein-dextran and casein-galactomannan conjugates was 10 times higher than that of casein. The improvement in these emulsifying properties reached a steady state when the conjugation of casein with polysaccharide was done for 24 hr in a controlled dry state, suggesting the rapid formation of conjugates through a Maillard reaction in the case of casein. Compared to commercial emulsifiers, the casein-polysaccharide conjugates showed better emulsifying properties in acidic and high-salt concentration systems.     

Tracking wind‐dispersed seeds using 15N‐isotope enrichment

Seed dispersal influences a wide range of ecological processes. However, measuring dispersal patterns, particularly long‐distance dispersal, has been a difficult task. Marking bird‐dispersed seeds with stable ¹⁵N isotopes has been shown to be a user‐friendly method to trace seed dispersal. In this study, we determined whether ¹⁵N urea solution could be used to enrich seeds of two common wind‐dispersed plants, Eupatorium glaucescens (Asteraceae) and Sericocarpus tortifolius (Asteraceae). We further tested if the water type (distilled versus tap) in ¹⁵N urea solutions influences the level and variability of enrichment of plant seeds, and if increasing spraying frequency per se increases enrichment. Because droughts may lower seed set or kill plants, we wanted to investigate if the additional use of an externally applied anti‐transpirant affects the intake of externally applied ¹⁵N into seeds. The results demonstrate that ¹⁵N enrichment of seeds can facilitate dispersal experiments with wind‐dispersed plants. The use of distilled water in ¹⁵N urea solutions did not increase ¹⁵N enrichment compared to tap water. Further, enrichment was more efficient at lower spray frequencies. Both the use of tap water and low frequencies could lower time, effort and project costs. The results suggest that species can be protected from drought using an anti‐transpirant without decreasing the incorporation of ¹⁵N into seeds.     

Removal of Cr6+ from groundwater using zero-valence iron in the laboratory

Abstract

In this paper, we describe a series of laboratory experiments which quantify the rate of Cr⁶⁺ reduction by Fe⁰. The main goal of these experiments was to determine the removal efficiency of Cr⁶⁺ by iron. The results indicate that Fe⁰ reduces Cr⁶⁺ to Cr³⁺ under alkaline and slightly acidic conditions. The removal efficiency rises with an increase of the initial concentration of Cr⁶⁺ (1 mg/L to 10 mg/L) when the quantity of Fe⁰ is stable. The removal efficiency increases as the quantity of Fe⁰ is raised when other conditions are constant. The removal efficiency would not be affected by other inorganic ions unless they were present at very high concentrations. When the initial concentration Cr⁶⁺ is 10mg/L and pH is 6.5–7.7, the final concentration of Cr⁶⁺ in effluent is less than 0.05 mg/L and the total Fe is less than 0.3 mg/L in effluent.