捕食性蝽类唾液腺解剖方法—以叉角厉蝽为例

唾液腺的解剖是研究捕食性蝽类唾液成分及功能的关键。以叉角厉蝽Eocanthecona furcellata为例,报道了解剖获得其完整唾液腺的方法。该方法与其他解剖方法相比明显不同之处在于使用镊子固定虫体,更有利于唾液腺的解剖与收集。通过拍照观察,叉角厉蝽的唾液腺由主腺、副腺、肺门和导管组成。主腺可分为主腺前叶和主腺后叶,它们之间通过肺门相连。主腺肺门处着生有两根导管,其中一根导管与口器相连,而另一根导管与副腺连接。本文描述的解剖方法以及叉角厉蝽唾液腺形态结构可用于指导解剖获得其它捕食性蝽类的唾液腺,进而提取唾液开展成分鉴定和功能研究。     

褐飞虱卵巢发育的形态变化过程及分级标准

卵巢解剖在褐飞虱Nilaparvata lugens (St(a)l)的迁飞研究和预测预报中起着重要的作用,但由于卵巢解剖是一项精细化的技术,在实际的病虫测报工作中,解剖技巧和分级标准难以被基层植保工作者掌握.为了使卵巢解剖技术在病虫测报中发挥其应有的作用,本研究在前人工作的基础上,根据我国病虫测报工作中卵巢分级的实践...     

胸腔镜肺楔形切除术与胸腔镜肺叶切除加纵隔淋巴结清扫术治疗早期非小细胞肺癌患者的临床效果比较

目的:对比分析胸腔镜肺楔形切除术与胸腔镜肺叶切除加纵隔淋巴结清扫术治疗早期非小细胞肺癌患者的临床效果。方法:选择2012年1月～2016年12月我院心胸外科收治的70例早期非小细胞肺癌患者,将其随机分为两组。对照组采取胸腔镜肺叶切除加纵隔淋巴结清扫术治疗,观察组采取胸腔镜肺楔形切除术治疗。比较两组的手术情况、术后情况、预后情况以及生存情况。结果:观察组的术中出血量以及手术时间明显短于对照组(P0.05),术后总引流量、留置引流管时间、术后住院时间以及VAS疼痛评分均明显低于对照组(P0.05)。观察组术后1年的手术切缘转移率为0.00%(0/35),死亡率为11.43%(4/35),均明显低于对照组(P0.05)。两组的局部复发率、复发率、胸腔内转移率、淋巴结转移率、远处转移率、肿瘤相关性死亡率相比无明显的差异(P0.05)。对照组患者的无病进展生存期为8.24个月(95%CI:9.34～6.27),中位生存期为15.29个月(95%CI:12.14～21.78);观察组患者的无疾病进展生存期为11.26个月(95%CI:9.37～14.35),中位生存期为18.13个月(95%CI:15.24～22.36),均明显长于对照组(P0.05)。结论:胸腔镜肺楔形切除术治疗早期非小细胞肺癌患者的临床效果明显优于胸腔镜肺叶切除加纵隔淋巴结清扫术治疗。     

臭椿沟眶象幼虫消化道解剖方法

臭椿沟眶象幼虫消化道柔软脆弱,尤其是1龄与2龄幼虫的消化道纤细易断,解剖难度较大。本文介绍了臭椿沟眶象幼虫消化道的具体解剖方法,根据不同龄期幼虫脂肪含量与消化道韧性差异,对1-2龄和3-7龄幼虫,分别使用纵切法和剥离法解剖。结果表明:臭椿沟眶象幼虫消化道分为前肠、中肠和后肠。前肠为窄而细的管状,没有明显的嗉囊和前胃。中肠分为2部分,前部膨大,后部为光滑的管状。后肠由回肠和直肠组成。马氏管6根。这两个方法提高了此幼虫消化道解剖的效率与成功率,希望能为具有体壁柔软、消化道脆弱易损等特点昆虫幼虫的消化道解剖提供借鉴与参考。     

Targeting Ferroptosis as a Novel Approach to Alleviate Aortic Dissection

A variety of programmed cell death types have been shown to participate in the loss of smooth muscle cells (SMCs) during the development of aortic dissection (AD), but it is still largely unclear whether ferroptosis is involved in the development of AD. In the present study, we found that the expression of key ferroptosis regulatory proteins, solute carrier family 7 member 11 (SLC7A11), ferroptosis suppressor protein 1 (FSP1) and glutathione peroxidase 4 (GPX4) were downregulated in aortas of Stanford type A AD (TAAD) patients, and liproxstatin-1, a specific inhibitor of ferroptosis, obviously abolished the β-aminopropionitrile (BAPN)-induced development and rupture of AD in mice. Furthermore, the expression of methyltransferase-like 3 (METTL3), a major methyltransferase of RNA m⁶A, was remarkably upregulated in the aortas of TAAD patients, and the protein levels of METTL3 were negatively correlated with SLC7A11 and FSP1 levels in human aortas. Overexpression of METTL3 in human aortic SMCs (HASMCs) inhibited, while METTL3 knockdown promoted SLC7A11 and FSP1 expression. More importantly, overexpression of METTL3 facilitated imidazole ketone erastin- and cystine deprivation-induced ferroptosis, while knockdown of METTL3 repressed ferroptosis of HASMCs. Overexpression of either SLC7A11 or FSP1 largely abrogated the effect of METTL3 on HASMC ferroptosis. Therefore, we have revealed that ferroptosis is a critical cause of AD in both humans and mice and that METTL3 promotes ferroptosis of HASMCs by inhibiting the expression of SLC7A11 and FSP1. Thus, targeting ferroptosis or m⁶A RNA methylation is a potential novel strategy for the treatment of AD.     

构建基于患者个体化的Stanford B型主动脉夹层计算流体力学数值模拟分析模型

目的:探索简便、高效、精确的构建基于真实人体解剖形态结构的Stanford B型主动脉夹层计算流体力学数值模拟分析模型的方法.方法:利用Siemens Sensation Cardiac 64层螺旋CT薄层扫描技术,基于1mm层厚获取6例Stanford B型主动脉夹层连续断层DICOM格式图像,导入Materialise MIMICS v12.11软件,界定目标区域后生成三维动脉模型,经网格优化处理去除低质量及相交面网格,保存结果输出,导入TGrid 5.0软件,对主动脉面网格模型进行几何修复,使面网格扭曲率<0.75,采用自由分网方式生成Stanford B型主动脉夹层计算流体力学分析体网格模型,并对所构建模型进行血流属性、流场边界等界定,初步验证模型的有效性.结果:通过初步计算求解,确定所构建的6例Stanford B型主动脉夹层计算流体力学分析模型分别包含1857030,1820501,1844181,1849651,1858246及1814914个四面体单元.结论:利用64层螺旋CT薄层扫描技术获取DICOM格式连续断层CT图像可快速、准确地构建Stanford B型主动脉夹层计算流体力学数值模拟分析模型,为进一步的计算流体力学分析奠定了良好的基础.     

Fluid-structure Interaction within a Layered Aortic Arch Model

The response of wall stress to the elasticity of each layer in the aorta wall was investigated to understand the role of the different elastic properties of layers in the aortic dissection. The complex mechanical interaction between blood flow and wall dynamics in a three-dimensional arch model of an aorta was studied by means of computational coupled fluid-structure interaction analysis. The results show that stresses in the media layer are highest in three layers and that shear stress is concentrated in the media layer near to the adventitia layer. Hence, the difference in the elastic properties of the layers could be responsible for the pathological state in which a tear splits across the tunica media to near to the tunica adventitia and the dissection spreads along the laminar planes of the media layer where it is near the adventitia layer.