Resistin and RELM-alpha gene expression in white adipose tissue of lactating mice

An ORF2 gene located upstream of the cellulose synthase (bcs) operon of Acetobacter xylinum BPR2001 was disrupted and a mutant (M2-2) was constructed. In static cultivation, the parent strain produced a tough, colorless, and insoluble cellulose pellicle, whereas M2-2 culture produced a thin, yellow, and fragile pellicle. The results of X-ray diffraction and 13C solid-state NMR indicated that the product of M2-2 is a mixture of cellulose I, cellulose II, and amorphous cellulose. The cellulose I to cellulose II ratio of the mixture was evaluated from the signal areas of C6 to be about 1:2. Electron microscopy revealed that the product of M2-2 included ribbon-like cellulose and irregularly shaped particles attached to the ribbons. On the other hand, the mutant complemented with plasmid pSA-ORF2/k containing the ORF2 gene and BPR2001 produced only cellulose I. These results indicate that the ORF2 gene is involved in the production and crystallization of cellulose I microfibrils by this microorganism.     

Release of salbutamol sulphate and ketoprofen enantiomers from matrices containing HPMC and cellulose derivatives

We studied the release of salbutamol and ketoprofen enantiomers from HPMC K100M matrices containing two types of cellulose derivatives: cellulose tris (3,5-dimethylphenylcarbamate) and cellulose tris (2,3-dichlorophenylcarbamate), chiral excipients used as stationary phases for liquid chromatography. These matrices provided an extended release of both drugs. Ketoprofen release from formulations elaborated with cellulose tris (2,3-dichlorophenylcarbamate) was by anomalous transport, because the value of n (release exponent of the diffusion equation) ranged between 0.60-0.68, whereas for all other formulations the value of exponent n ranged from 0.50-0.54. The drug thus diffuses through the matrix and is released following a quasi-Fickian diffusion mechanism (stereoselective process). The matrices preferentially retained R-salbutamol and S-ketoprofen and cellulose tris (3,5-dimethylphenylcarbamate) showed more capacity of chiral discrimination for both drugs than cellulose tris (2,3-dichlorophenylcarbamate). Moreover, we observed that stereoselectivity is dependent on the amount of chiral excipient in the formulation. Diffusion tests confirmed the chiral interaction between drugs and cellulose derivatives observed in the dissolution assays except for matrices elaborated with ketoprofen and cellulose tris (2,3-dichlorophenylcarbamate), where the low stereoselectivity observed with the matrices is due to the presence of HPMC K100M. We conclude that the inclusion of these cellulose derivatives in HPMC matrices does not result in a relevant stereoselectivity with respect to the two drugs studied.     

Factors affecting the yield and properties of bacterial cellulose

Acetobacter xylinum E₂₅ has been applied in our studies in order to find optimal culture conditions for effective bacterial cellulose (BC) production. The strain displays significantly higher stability in BC production under stationary culture conditions. In contrast, intensive agitation and aeration appear to drastically reduce cellulose synthesis since such conditions induced formation of spontaneous cellulose nonproducing mutants (Cel−), which dominated in the culture. Mutation frequency strictly depends on the medium composition in agitated cultures. Enrichment of the standard SH and Yamanaka media with 1% ethanol significantly enhanced BC production in stationary cultures. Horizontal fermentors equipped with rotating discs or rollers were successfully applied in order to improve culture conditions. Relatively slow rotation velocity (4 rpm) and large surface area enabling effective cell attachment are optimal parameters for cellulose production. Physical properties of BC samples synthesized either in stationary cultures or in a horizontal fermentor revealed that cellulose from stationary cultures demonstrated a much higher value of Young's modulus, but a much lower value of water-holding capacity. Journal of Industrial Microbiology & Biotechnology (2002) 29, 189–195 doi:10.1038/sj.jim.7000303 Received 01 March 2002/ Accepted in revised form 18 July 2002     

Mosquito larval consumption of toxic arborescent leaf-litter,and its biocontrol potential

Previously we described the mosquito larvicidal properties of decomposed leaf-litter from deciduous trees, especially the alder Alnus glutinosa (L) Gaertn., due to toxic polyphenols and other secondary compounds. To further examine the biocontrol potential of toxic leaf-litter for mosquito control, feeding rates of third-instar mosquito larvae were assessed for examples of three genera: Anopheles stephensi Liston, Aedes aegypti (L) and Culex pipiens L. (Diptera: Culicidae). When immersed in a suspension of non-toxic leaf-litter particles (approximately 0.4 mm), pre-starved larvae of all three species ingested sufficient material in 30 min to fill the anterior gut lumen (thorax plus two to three abdominal segments). Gut filling peaked after 1-2 h ingestion time, filling the intestine up to six to seven abdominal segments for Ae. aegypti, but maxima of five abdominal segments for Cx. pipiens and An. stephensi. Using three methods to quantify consumption of three materials by third-instar larvae of Ae. aegypti, the average amount of leaf-litter (non-toxic 0.4 mm particles) ingested during 3 h was determined as approximately 20 microg/larva (by dry weight and by lignin spectrophotometric assay). Consumption of humine (approximately 100 microm particles extracted from leaf-litter) during 3 h was approximately 80 microg/larva for Ae. aegypti, but only approximately 30 microg/larva for Cx. pipiens and 15 microg/larva for An. stephensi, with good concordance of determinations by dry weight and by radiometric assay. Cellulose consumption by Ae. aegypti was intermediate: approximately 40 microg/larva determined by radiometric assay. Apparent differences between the amounts of these materials ingested by Ae. aegypti larvae (humine four-fold, cellulose two-fold more than leaf-litter) may be attributed to contrasts in palatability (perhaps related to particle size or form), rather than technical discrepancies, because there was good concordance between results of both methods used to determine the amounts of humine and leaf-litter ingested. Bioassays of toxic leaf-litter (decomposed 10 months) with 4-h exposure period (ingestion time) ranked the order of sensitivity: Ae. aegypti (LC50 < 0.03 g/L) > An. stephensi (LC50 = 0.35 g/L) > Cx. pipiens (LC20 > 0.4 g/L). When immersed in the high concentration of 0.5 g/L toxic leaf-litter (0.4 mm particles), as little as 15-30 min ingestion time (exposure period) was sufficient to kill the majority of larvae of all three species, as soon as the gut lumen was filled for only the first few abdominal segments. Possibilities for mosquito larval control with toxic leaf-litter products and the need for standardized ingestion bioassays of larvicidal particles are discussed.     

Classification and identification of Arabidopsis cell wall mutants using Fourier-Transform InfraRed (FT-IR) microspectroscopy

We have developed a novel procedure for the rapid classification and identification of Arabidopsis mutants with altered cell wall architecture based on Fourier-Transform Infrared (FT-IR) microspectroscopy. FT-IR transmission spectra were sampled from native 4-day-old dark-grown hypocotyls of 46 mutants and the wild type treated with various drugs. The Mahalanobis distance between mutants, calculated from the spectral information after compression with the Discriminant Variables Selection procedure, was used for alpha hierarchical cluster analysis. Despite the completely unsupervised nature of the classification procedure, we show that all mutants with cellulose defects appeared in the same cluster. In addition, mutant alleles of similar strength for several unrelated loci were also clustered, which demonstrates the sensitivity of the method to detect a wide array of cell wall defects. Comparing the cellulose-deficient cluster with the cluster that contained wild-type controls led to the identification of wave numbers that were diagnostic for altered cellulose content in the context of an intact cell wall. The results show that FT-IR spectra can be used to identify different classes of mutants and to characterize cell wall changes at a microscopic level in unknown mutants. This procedure significantly accelerates the identification and classification of cell wall mutants, which makes cell wall polysaccharides more accessible to functional genomics approaches.     

β-D-Glycan synthases and the CesA gene family: lessons to be learned from the mixed-linkage (1→3),(1→4)β-D-glucan synthase

Cellulose synthase genes (CesAs) encode a broad range of processive glycosyltransferases that synthesize (14)-D-glycosyl units. The proteins predicted to be encoded by these genes contain up to eight membrane-spanning domains and four `U-motifs' with conserved aspartate residues and a QxxRW motif that are essential for substrate binding and catalysis. In higher plants, the domain structure includes two plant-specific regions, one that is relatively conserved and a second, so-called `hypervariable region' (HVR). Analysis of the phylogenetic relationships among members of the CesA multi-gene families from two grass species,Oryza sativa and Zea mays, with Arabidopsis thaliana and other dicotyledonous species reveals that the CesA genes cluster into several distinct sub-classes. Whereas some sub-classes are populated by CesAs from all species, two sub-classes are populated solely by CesAs from grass species. The sub-class identity is primarily defined by the HVR, and the sequence in this region does not vary substantially among members of the same sub-class. Hence, we suggest that the region is more aptly termed a `class-specific region' (CSR). Several motifs containing cysteine, basic, acidic and aromatic residues indicate that the CSR may function in substrate binding specificity and catalysis. Similar motifs are conserved in bacterial cellulose synthases, the Dictyostelium discoideum cellulose synthase, and other processive glycosyltransferases involved in the synthesis of non-cellulosic polymers with (14)-linked backbones, including chitin, heparan, and hyaluronan. These analyses re-open the question whether all the CesA genes encode cellulose synthases or whether some of the sub-class members may encode other non-cellulosic (14)-glycan synthases in plants. For example, the mixed-linkage (13)(14)-D-glucan synthase is found specifically in grasses and possesses many features more similar to those of cellulose synthase than to those of other -linked cross-linking glycans. In this respect, the enzymatic properties of the mixed-linkage -glucan synthases not only provide special insight into the mechanisms of (14)-glycan synthesis but may also uncover the genes that encode the synthases themselves.     

Mechanism of interaction between cellulase action and applied shear force, an hypothesis

An overview is given of what is known in literature concerning the structure of both cellulose and cellulase enzymes and the enzymatic degradation of cellulose. Based on this knowledge, a hypothesis is formulated about the relation between cellulase performance and required applied shear force on the fabric. In short, the specific cellulase activity is highest on the flexible amorphous cellulose when compared to that with the more rigid crystalline cellulose. When applying cellulase activity on damaged, fuzzy fabric, the connection point of cellulose material oriented away from the fiber axis, which is partly amorphous due to the damage, will be turned again to a more rigid, mainly crystalline structure. Due to this shift, this connection point will function as a primary point of application for shear force, resulting in removal of the fuzz.     

Ultrastructural changes in the muscles,midgut, hemopoietic organ,imaginal discs and Malpighian tubules of the mosquito Aedes aegypti larvae infected by the fungus Coelomomyces stegomyiae

Fungi belonging to the genus Coelomomyces can infect mosquito larvae and develop within the larval hemocoel. To examine fungal development, Aedesaegypti larvae infected with Coelomomyces stegomyiae Keilin were fixed, embedded and sectioned for both light and electron microscopy. While fungal hyphae of C. stegomyiae did not invade cells other than the cuticular epithelial cells, they did penetrate a number of tissues including muscles, midgut, hemopoietic organ, imaginal discs, and Malpighian tubules. This revised version was published online in July 2006 with corrections to the Cover Date.     

Nutrient dynamics and lignocellulose degradation in decomposing Quercus serrata leaf litter

The litter mass loss, concentration and mass of some major nutrient elements, degradation of lignin and cellulose in decomposing Quercus serrata Murray leaf litter were monitored for 3 years using the litterbag method. The mobility of elements during the course of the study was in the order of: K > P > C > Mg > Ca > N. Three patterns of nutrient dynamics were observed: (i) concentration increased while mass decreased (N, Mg and Ca); (ii) concentration and nutrient mass decreased (K and C); and (iii) both concentration and mass had fluctuated (P). The C to element ratio tended to increase as the element was released, and decreased as the element was retained. Nitrogen mobility in relation to carbon was characterized by three phases: (i) initial release; (ii) accumulation and (iii) final release. The decay rate (k) calculated from 0–6 months period was overestimated for an average annual rate while those of 0–36 months fit the negative single exponential model (Adj. r² = 0.99) better than shorter periods. For lignin, the concentration had increased then decreased but tended to stabilize after 1 year while the lignin mass had continuously decreased throughout the study period. During the first 9 months, both the concentrations and mass of cellulose had fluctuated but declined thereafter. The amounts of N had initially increased but declined after 1 year; P had fluctuated while K, Ca, Mg and C had decreased throughout the study. N and C/N ratio exerted strong influence on mass loss during the first24 months but the influence of lignin emerged after 24 months.     

A study on the effect of operating parameters on the cross-flow microfiltration of yeasts

The effects of pump speed, cumulative permeate volume and concentration of feed (yeast cells) on the permeate flux have been studied on a batch cross-flow microfiltration process. The experiments were conducted for two different cellulose acetate membrane modules of 0.2 m and 0.45 m pore size. A three factor experiment was designed for this purpose and the effect of the operating parameters on the filtration rate was studied by the analysis of variance (ANOVA). It is concluded from the analysis of the experimental data that pump speed has the maximum bearing upon the permeate rate within the operating range of parameters. Fouling conditions were examined in the light of colloids deposition on membranes due to surface interactions. However this paper looks into the relationship and sensitivity of the operating parameters in a cross-flow microfiltration unit rather than exploring the theoretical principles behind the observed phenomena.This revised version was published online in October 2005 with corrections to the Cover Date.