Heterotopic Renal Autotransplantation in a Porcine Model: A Step-by-Step Protocol

Kidney transplantation is the treatment of choice for patients suffering from end-stage renal disease. It offers better life expectancy and higher quality of life when compared to dialysis. Although the last few decades have seen major improvements in patient outcomes following kidney transplantation, the increasing shortage of available organs represents a severe problem worldwide. To expand the donor pool, marginal kidney grafts recovered from extended criteria donors (ECD) or donated after circulatory death (DCD) are now accepted for transplantation. To further improve the postoperative outcome of these marginal grafts, research must focus on new therapeutic approaches such as alternative preservation techniques, immunomodulation, gene transfer, and stem cell administration.Experimental studies in animal models are the final step before newly developed techniques can be translated into clinical practice. Porcine kidney transplantation is an excellent model of human transplantation and allows investigation of novel approaches. The major advantage of the porcine model is its anatomical and physiological similarity to the human body, which facilitates the rapid translation of new findings to clinical trials. This article offers a surgical step-by-step protocol for an autotransplantation model and highlights key factors to ensure experimental success. Adequate pre- and postoperative housing, attentive anesthesia, and consistent surgical techniques result in favorable postoperative outcomes. Resection of the contralateral native kidney provides the opportunity to assess post-transplant graft function. The placement of venous and urinary catheters and the use of metabolic cages allow further detailed evaluation. For long-term follow-up studies and investigation of alternative graft preservation techniques, autotransplantation models are superior to allotransplantation models, as they avoid the confounding bias posed by rejection and immunosuppressive medication.     

Energy transfer between Ce3+ → Gd3+ or Tb3+ in KNaSO4 microphosphor

KNaSO₄ microphosphor doped with Ce,Gd and Ce,Tb and prepared by a wet chemical method was studied using X‐ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) characterization. KNaSO₄ has a 5‐µm particle size detected by SEM. KNaSO₄:Ce³⁺,Tb³⁺ showed blue and green emission (at 494 nm, 557 nm, 590 nm) of Tb³⁺ due to ⁵D₄ → ⁷F_J (J = 4, 5, 6) transitions. KNaSO₄:Ce³⁺,Gd³⁺ showed luminescence in the ultraviolet (UV) light region at 314 nm for an excitation at 271 nm wavelength. It was observed that efficient energy transfer took place from Ce³⁺ → Gd³⁺ and Ce³⁺ → Tb³⁺ sublattices indicating that Ce³⁺ could effectively sensitize Gd³⁺ or Tb³⁺ (green emission). Ce³⁺ emission weakened and Gd³⁺ or Tb³⁺ enhanced the emission significantly in KNaSO₄. This paper discusses the development and understanding of photoluminescence and the effect of Tb³⁺ and Gd³⁺ on KNaSO₄:Ce³⁺. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of highly fluorescent nitrogen and phosphorus doped carbon dots for the detection of Fe3+ ions in cancer cells

Highly fluorescent nitrogen and phosphorus‐doped carbon dots with a quantum yield 59% have been successfully synthesized from citric acid and di‐ammonium hydrogen phosphate by single step hydrothermal method. The synthesized carbon dots have high solubility as well as stability in aqueous medium. The as‐obtained carbon dots are well monodispersed with particle sizes 1.5–4 nm. Owing to a good tunable fluorescence property and biocompatibility, the carbon dots were applied for intercellular sensing of Fe³⁺ ions as well as cancer cell imaging. Copyright © 2015 John Wiley & Sons, Ltd.     

Classification of Chinese herbs based on the cluster analysis of delayed luminescence

Traditional Chinese material medica are an important component of the Chinese pharmacopeia. According to the traditional Chinese medicinal concept, Chinese herbal medicines are classified into different categories based on their therapeutic effects, however, the bioactive principles cannot be solely explained by chemical analysis. The aim of this study is to classify different Chinese herbs based on their therapeutic effects by using delayed luminescence (DL). The DL of 56 Chinese herbs was measured using an ultra‐sensitive luminescence detection system. The different DL parameters were used to classify Chinese herbs according to a hierarchical cluster analysis. The samples were divided into two groups based on their DL kinetic parameters. Interestingly, the DL classification results were quite consistent with classification according to the Chinese medicinal concepts of ‘cold’ and ‘heat’ properties. In this paper, we show for the first time that by using DL technology, it is possible to classify Chinese herbs according to the Chinese medicinal concept and it may even be possible to predict their therapeutic properties. Copyright © 2015 John Wiley & Sons, Ltd.     

Nondestructive evaluation of photosynthesis by delayed luminescence in Arabidopsis in Petri dishes

Nondestructive evaluation of photosynthesis is a valuable tool in the field and laboratory. Delayed luminescence (DL) can reflect charge recombination through the backflow of electrons. However, DL detection has not yet been adapted for whole plants in Petri dishes. To compensate for differences in DL decay between sibling Arabidopsis plants grown under the same conditions, we developed a time-sequential double measurement method. Using this method, we examined the influence of photosynthetic electron flow inhibitors, and differences in the DL decay curves were categorized by considering the initial and late phases of the decay curves, as well as their intermediate slopes. The appearance of concavity and convexity in DL curves in Arabidopsis was different from unicellular algae, suggesting complexity in the photosynthetic machinery of higher plants. This detection method should be invaluable for evaluating photosynthetic defects in higher plants under sterile conditions without interrupting plant culture.     

皮肤组织模型中吸收和散射系数对单线态氧发光特性的影响

构建由脂肪乳剂和墨水组成的皮肤组织模型,定量研究皮肤组织模型的吸收系数μa和散射系数μs对光敏化单线态氧(singlet oxygen,~1O_2)发光特性的影响。利用~1O_2发光检测系统测量含光敏剂四硫磺基酞菁氯化铝的皮肤组织模型分别在中心波长为1 230,1 270和1 310 nm处的时间分辨发光光谱,对扣除背景信号后的时间分辨~1O_2发光光谱进行积分和拟合,获得~1O_2发光积分强度以及激发三重态寿命τ_T和~1O_2寿命τ_D。结果表明在皮肤组织模型中,~1O_2发光积分强度随着μ_a和μ_s的增大而减小,μ_a对τ_T和τ_D没有影响。τ_T随着μs的增加而增加,τ_D随μ_s的增加先骤降而后缓慢上升。当μ_a1.5 mm~(-1)和μ_s32 cm~(-1)时,~1O_2发光积分强度和τ_T、τ_D均趋于稳定,其中τ_T和τ_D分别为3.4±0.6μs和3.3±0.7μs。     

Imaging Spatial Variations of Optical Bandgaps in Perovskite Solar Cells

A fast, nondestructive, camera‐based method to capture optical bandgap images of perovskite solar cells (PSCs) with micrometer‐scale spatial resolution is developed. This imaging technique utilizes well‐defined and relatively symmetrical band‐to‐band luminescence spectra emitted from perovskite materials, whose spectral peak locations coincide with absorption thresholds and thus represent their optical bandgaps. The technique is employed to capture relative variations in optical bandgaps across various PSCs, and to resolve optical bandgap inhomogeneity within the same device due to material degradation and impurities. Degradation and impurities are found to both cause optical bandgap shifts inside the materials. The results are confirmed with micro‐photoluminescence spectroscopy scans. The excellent agreement between the two techniques opens opportunities for this imaging concept to become a quantified, high spatial resolution, large‐area characterization tool of PSCs. This development continues to strengthen the high value of luminescence imaging for the research and development of this photovoltaic technology.     

The structure and luminescence properties of Mn2+/Eu2+/Er3+‐doped MgO‐Ga2O3‐SiO2 glasses and glass‐ceramics

The MgO–Ga₂O₃–SiO₂ glasses and glass‐ceramics samples doped with Eu²⁺/Mn²⁺/Er³⁺ and heated in reductive atmosphere were prepared by the sol–gel method. The structure, morphology and the luminescence properties were studied using X‐ray diffraction, high‐resolution transmission electron microscope, fluorescence spectra, and up‐conversion emission. The luminescence characteristics of doped ions could be influenced by temperature and matrix component. The characteristic emission of Mn²⁺, Eu²⁺ and Er³⁺ were seen and the energy transfer efficiency from Eu²⁺ to Mn²⁺ was enhanced as Mn²⁺ concentration was increased. In addition, the two‐photon process was determined for the Er³⁺‐doped samples.