Optimization and mathematical modeling of the transtubular bioreactor for the production of monoclonal antibodies from a hybridoma cell line

This report describes the use of a transtubular bioreactor to study the relative effects of diffusion versus perfusion of medium on antibody production by a hybridoma cell line. The study was performed with a high-density cell culture maintained in a serum-free, low-protein medium for 77 days. It was determined that the reactor possessed a macro-mixing pattern residence time distribution similar to a continuous stirred tank reactor (CSTR). However, due to the arrangement of the medium lines in the reactor, the flow patterns for nutrient distribution consist of largely independent medium path lengths ranging from short to long. When operated with cyclic, reversing, transtubular medium flow, some regions of the reactor (with short residence times) are more accessible to medium than others (with long residence times). From this standpoint, the reactor can be divided into three regions: a captive volume, which consists of medium primarily delivered via diffusion; a lapped volume, which provides nutrients through unilateral convection; and a swept volume, which operates through bilateral convection. The relative sizes of these three volumes were modified experimentally by changing the period over which the direction of medium flow was reversed from 15 min (larger captive volume) to 9 h (larger swept volume). The results suggest that antibody concentration increases as the size of the diffusion-limited (captive) volume is increased to a maximum at around 30 min with a sharp decrease thereafter. As reflected by changes in measured consumption of glucose and production of lactate, no significant difference in cellular metabolism occurred as the reactor was moved between these different states. These results indicate that the mode of operation of the transtubular bioreactor may influence antibody productivity under serum-free, low-protein conditions with minimal effects on cellular metabolism.     

Atomic contacts in protein structures. A detailed analysis of atomic radii, packing, and overlaps

A rigorous quantitative assessment of atomic contacts and packing in native protein structures is presented. The analysis is based on optimized atomic radii derived from a set of high-resolution protein structures and reveals that the distribution of atomic contacts and overlaps is a structural constraint in proteins, irrespective of structural or functional classification and size. Furthermore, a newly developed method for calculating packing properties is introduced and applied to sets of protein structures at different levels of resolution. The results show that limited resolution yields decreasing packing quality, which underscores the relevance of packing considerations for structure prediction, design, dynamics, and docking.     

Defining the minimum size of a hydrophobic cluster in two-stranded alpha-helical coiled-coils: effects on protein stability

The alpha-helical coiled-coil motif is characterized by a heptad repeat pattern (abcdefg)(n) in which residues a and d form the hydrophobic core. Long coiled-coils (e.g., tropomyosin, 284 residues per polypeptide chain) typically do not have a continuous hydrophobic core of stabilizing residues, but rather one that consists of alternating clusters of stabilizing and destabilizing residues. We have arbitrarily defined a cluster as a minimum of three consecutive stabilizing or destabilizing residues in the hydrophobic core. We report here on a series of two-stranded, disulfide-bridged parallel alpha-helical coiled-coils that contain a central cassette of three consecutive hydrophobic core positions (d, a, and d) with a destabilizing cluster of three consecutive Ala residues in the hydrophobic core on each side of the cassette. The effect of adding one to three stabilizing hydrophobes in these positions (Leu or Ile; denoted as [see text]) was investigated. Alanine residues (denoted as [see text]) are used to represent destabilizing residues. The peptide with three Ala residues in the d a d cassette positions ([see text]) was among the least stable coiled-coil (T(m) = 39.3 degrees C and Urea(1/2) = 1.9 M). Surprisingly, the addition of one stabilizing hydrophobe (Leu) to the cassette or two stabilizing hydrophobes (Leu), still interspersed by an Ala in the cassette ([see text]), also did not lead to any gain in stability. However, peptides with two adjacent hydrophobes in the cassette ([see text])([see text]) did show a gain in stability of 0.9 kcal/mole over the peptide with two interspersed hydrophobes ([see text]). Because the latter three peptides have the same inherent hydrophobicity, the juxtaposition of stabilizing hydrophobes leads to a synergistic effect, and thus a clustering effect. The addition of a third stabilizing hydrophobe to the cassette ([see text]) resulted in a further synergistic gain in stability of 1.7 kcal/mole (T(m) = 54.1 degrees C and Urea(1/2) = 3.3M). Therefore, the role of hydrophobicity in the hydrophobic core of coiled-coils is extremely context dependent and clustering is an important aspect of protein folding and stability.     

大鼠尿激酶SYBR Green I real time RT-PCR引物的设计

设计用于SYBR Green I法实时定量逆转录多聚酶链反应(QRT-PCR)检测大鼠尿激酶型纤溶酶原激活因子(uPA)mRNA的引物。从基因库获取靶基因及相关序列,充分收集争分析相关生物信息学数据,应用Oligo 6.22设计出一对长度为21bp的引物,其GG含量为52.4%;上下游引物3’最稳定二聚体和及发夹结构的能量分别为-1.5、-0.40 kcal/mol和-3.5、-O.90 kcal/mol,引物间最稳定二聚体为-3.1 kcal/mol。5’端和中间△G值较高,高于3’端△G;引发效率分别455和403。实验证明,该引物能够高效、特异地实现对靶序列的检测,适用于SYBR Green I法实时定量检测(uPA)mRNA。     

Peptidic models for the binding of Pb(II), Bi(III) and Cd(II) to mononuclear thiolate binding sites

Herein, we evaluate the binding of Pb(II) and Bi(III) to cysteine-substituted versions of the TRI peptides [AcG-(LKALEEK)₄G-NH₂] which have previously been shown to bind Hg(II) and Cd(II) in unusual geometries as compared with small-molecule thiol ligands in aqueous solutions. Studies of Pb(II) and Bi(III) with the peptides give rise to complexes consistent with the metal ions bound to three sulfur atoms with M–S distances of 2.63 and 2.54 Å, respectively. Competition experiments between the metal ions Pb(II), Cd(II), Hg(II) and Bi(III) for the peptides show that Hg(II) has the highest affinity, owing to the initial formation of the extremely strong HgS₂ bond. Cd(II) and Pb(II) have comparable binding affinities at pH > 8, while Bi(III) displays the weakest affinity, following the model, M(II) + (TRI LXC)₃ ^3? → M(II)(TRI LXC)₃ ^?. While the relevant equilibria for Hg(II) binding to the TRI peptides corresponds to a strong first step forming Hg(TRI LXC)₂(HTRI LXC), followed by a single deprotonation to give Hg(TRI LXC)₃ ^?, the binding of Cd(II) and Pb(II) is consistent with initial formation of M(II)(TRI LXC)(HTRI LXC)₂ ⁺ at pH < 5 followed by a two-proton dissociation step (pK _a2) yielding M(II)(TRI LXC)₃ ^?. Pb(II)(TRI LXC)(HTRI LXC)₂ ⁺ converts to Pb(II)(TRI LXC)₃ ^? at slightly lower pH values than the corresponding Cd(II)–peptide complexes. In addition, Pb(II) displays a lower pK _a of binding to the “d”-substituted peptide, (TRI L12C, pK _a2 = 12.0) compared with the “a”-substituted peptide, (TRI L16C, pK _a2 = 12.6), the reverse of the order seen for Hg(II) and Cd(II). Pb(II) also showed a stronger binding affinity for TRI L12C (K _bind = 3.2 × 10⁷ M^?1) compared with that with TRI L16C (K _bind = 1.2 × 10⁷ M^?1) at pH > 8.     

Boosting protein stability with the computational design of β‐sheet surfaces

β‐sheets often have one face packed against the core of the protein and the other facing solvent. Mutational studies have indicated that the solvent‐facing residues can contribute significantly to protein stability, and that the preferred amino acid at each sequence position is dependent on the precise structure of the protein backbone and the identity of the neighboring amino acids. This suggests that the most advantageous methods for designing β‐sheet surfaces will be approaches that take into account the multiple energetic factors at play including side chain rotamer preferences, van der Waals forces, electrostatics, and desolvation effects. Here, we show that the protein design software Rosetta, which models these energetic factors, can be used to dramatically increase protein stability by optimizing interactions on the surfaces of small β‐sheet proteins. Two design variants of the β‐sandwich protein from tenascin were made with 7 and 14 mutations respectively on its β‐sheet surfaces. These changes raised the thermal midpoint for unfolding from 45°C to 64°C and 74°C. Additionally, we tested an empirical approach based on increasing the number of potential salt bridges on the surfaces of the β‐sheets. This was not a robust strategy for increasing stability, as three of the four variants tested were unfolded.     

Improving coiled-coil stability by optimizing ionic interactions

Alpha-helical coiled coils are a common protein oligomerization motif stabilized mainly by hydrophobic interactions occurring along the coiled-coil interface. We have recently designed and solved the structure of a two-heptad repeat coiled-coil peptide that is stabilized further by a complex network of inter- and intrahelical salt-bridges in addition to the hydrophobic interactions. Here, we extend and improve the de novo design of this two heptad-repeat peptide by four newly designed peptides characterized by different types of ionic interactions. The contribution of these different types of ionic interactions to coiled-coil stability are analyzed by CD spectroscopy and analytical ultracentrifugation. We show that all peptides are highly alpha-helical and two of them are 100% dimeric under physiological conditions. Furthermore, we have solved the X-ray structure of the most stable of these peptides and the rational design principles are verified by comparing this structure to the structure of the parent peptide. We show that by combining the most favorable inter- and intrahelical salt-bridge arrangements it is possible to design coiled-coil oligomerization domains with improved stability properties.     

Dermatophytosis caused by Nannizzia nana in two siblings

Background

Nannizzia nana is a zoophilic dermatophyte that affects animals like pigs, boars and, exceptionally, humans, in whom it causes tinea capitis, as well as tinea corporis and onychomycosis.

Novel RasGRF1-derived Tat-fused peptides inhibiting Ras-dependent proliferation and migration in mouse and human cancer cells

Mutations of RAS genes are critical events in the pathogenesis of different human tumors and Ras proteins represent a major clinical target for the development of specific inhibitors to use as anticancer agents. Here we present RasGRF1-derived peptides displaying both in vitro and in vivo Ras inhibitory properties. These peptides were designed on the basis of the down-sizing of dominant negative full-length RasGRF1 mutants. The over-expression of these peptides can revert the phenotype of K-RAS transformed mouse fibroblasts to wild type, as monitored by several independent biological readouts, including Ras-GTP intracellular levels, ERK activity, morphology, proliferative potential and anchorage independent growth. Fusion of the RasGRF1-derived peptides with the Tat protein transduction domain allows their uptake into mammalian cells. Chemically synthesized Tat-fused peptides, reduced to as small as 30 residues on the basis of structural constraints, retain Ras inhibitory activity. These small peptides interfere in vitro with the GEF catalyzed nucleotide dissociation and exchange on Ras, reduce cell proliferation of K-RAS transformed mouse fibroblasts, and strongly reduce Ras-dependent IGF-I-induced migration and invasion of human bladder cancer cells. These results support the use of RasGRF1-derived peptides as model compounds for the development of Ras inhibitory anticancer agents.