Mouse inbred strain differences in ethanol drinking to intoxication

Recently, we described a simple procedure, Drinking in the Dark (DID), in which C57BL/6J mice self-administer ethanol to a blood ethanol concentration (BEC) above 1 mg/ml. The test consists of replacing the water with 20% ethanol in the home cage for 4 h early during the dark phase of the light/dark cycle. Three experiments were conducted to explore this high ethanol drinking model further. In experiment 1, a microanalysis of C57BL/6J behavior showed that the pattern of ethanol drinking was different from routine water intake. In experiment 2, drinking impaired performance of C57BL/6J on the accelerating rotarod and balance beam. In experiment 3, 12 inbred strains were screened to estimate genetic influences on DID and correlations with other traits. Large, reliable differences in intake and BEC were detected among the strains, with C57BL/6J showing the highest values. Strain means were positively correlated with intake and BEC in the standard (24 h) and a limited (4 h) two-bottle ethanol vs. water test, but BECs reached higher levels for DID. Strain mean correlations with other traits in the Mouse Phenome Project database supported previously reported genetic relationships of high ethanol drinking with low chronic ethanol withdrawal severity and low ethanol-conditioned taste aversion. We extend these findings by showing that the correlation estimates remain relatively unchanged even after correcting for phylogenetic relatedness among the strains, thus relaxing the assumption that the strain means are statistically independent. We discuss applications of the model for finding genes that predispose pharmacologically significant drinking in mice.     

Light-induced immobilisation of biomolecules as an attractive alternative to microdroplet dispensing-based arraying technologies

The present work shows how UV 'light-induced molecular immobilisation' (LIMI) of biomolecules onto thiol reactive surfaces can be used to make biosensors, without the need for traditional microdispensing technologies. Using 'LIMI,' arrays of biomolecules can be created with a high degree of reproducibility. This technology can be used to circumvent the need for often expensive nano/microdispensing technologies. The ultimate size of the immobilised spots is defined by the focal area of the UV beam, which for a diffraction-limited beam can be less than 1 microm in diameter. LIMI has the added benefit that the immobilised molecules will be spatially oriented and covalently bound to the surface. The activity of the sensor molecules is retained. Antibody sensor arrays made using LIMI demonstrated successful antigen binding. In addition, the pattern of immobilised molecules on the surface is not restricted to conventional array formats. The ultimate consequence of the LIMI is that it is possible to write complex protein patterns using bitmaps at high resolution onto substrates. Thus, LIMI of biomolecules provides a new technological platform for biomolecular immobilisation and the potential for replacing present microdispensing arraying technologies.     

Genetic diversity of Dekkera bruxellensis yeasts isolated from Australian wineries

Yeasts of the genus Dekkera and its anamorph Brettanomyces represent a significant spoilage issue for the global wine industry. Despite this, there is limited knowledge of genetic diversity and strain distribution within wine and winery-related environments. In this study, amplified fragment length polymorphism (AFLP) analysis was conducted on 244 Dekkera bruxellensis isolates from red wine made in 31 winemaking regions of Australia. The results indicated there were eight genotypes among the isolates, and three of these were commonly found across multiple winemaking regions. Analysis of 26S rRNA gene sequences provided further evidence of three common, conserved groups, whereas a phylogeny based upon the AFLP data demonstrated that the most common D. bruxellensis genotype (I) in Australian red wine was highly divergent from the D. bruxellensis type strain (CBS 74).     

Cdc37p is involved in osmoadaptation and controls high osmolarity-induced cross-talk via the MAP kinase Kss1p

Cdc37p, the p50 homolog of Saccharomyces cerevisiae, is an Hsp90 cochaperone involved in the targeting of protein kinases to Hsp90. Here we report a role for Cdc37p in osmoadaptive signalling in this yeast. The osmosensitive phenotype that is displayed by the cdc37-34 mutant strain appears not to be the consequence of deficient signalling through the high osmolarity glycerol (HOG) MAP kinase pathway. Rather, Cdc37p appears to play a role in the filamentous growth (FG) pathway, which mediates adaptation to high osmolarity parallel to the HOG pathway. The osmosensitive phenotype of the cdc37-34 mutant strain is aggravated upon the deletion of the HOG gene. We report that the hyper-osmosensitive phenotype of the cdc37-34, hog1 mutant correlates to a reduced of activity of the FG pathway. We utilized this phenotype to isolate suppressor genes such as KSS1 that encodes a MAP kinase that functions in the FG pathway. We report that Kss1p interacts physically with Cdc37p. Like Kss1p, the second suppressor that we isolated, Dse1p, is involved in cell wall biogenesis or maintenance, suggesting that Cdc37p controls osmoadapation by regulating mitogen-activated protein kinase signalling aimed at adaptive changes in cell wall organization.     

Long-time molecular dynamics simulations of botulinum biotoxin type-A at different pH values and temperatures

Botulinum neurotoxins type A (BoNT/A) are highly potent toxins, but are also useful in the treatment of illnesses. We studied the properties of BoNT/A at various temperatures and pH values in order to understand its toxicity and structure variations. The pH values of the environment of BoNT/A are obtained by changing the protonation states of certain titratable residue groups. Our results show that certain parts of the protein are active at acidic pH environments or at high temperatures. The protein is more stable in neutral environments at normal human body temperature, whereas, at high temperature, the protein is more stable in acidic environments. Also, the three domains of the protein tend to have relative motion rather than within individual domains.     

Study of the inhibition of cyclin-dependent kinases with roscovitine and indirubin-3′-oxime from molecular dynamics simulations

Molecular dynamics simulations were performed to elucidate the interactions of CDK2 and CDK5 complexes with three inhibitors: R-roscovitine, S-roscovitine, and indirubin-3′-oxime. The preference of the two complexes for R-roscovitine over the S enantiomer, as reported by the experiment, was also found by the simulations. More importantly, the simulations showed that the cause of the stronger affinity for the R enantiomer is the presence of an important hydrogen bond between R-roscovitine and the kinases not found with S-roscovitine. The simulations also showed two amino acid mutations in the active site of CDK5/R-roscovitine that favor binding-enhanced electrostatic contributions, making the inhibitor more effective for CDK5 than for CDK2. This suggests that the effectiveness of roscovitine-like inhibitors can be improved by enhancing their electrostatic interaction with the kinases. Finally, molecular mechanics–Possion–Boltzmann/surface area calculations of the CDK5/indirubin-3′-oxime system in both water-excluded and water-included environments gave significantly different electrostatic contributions to the binding. The simulations detected the displacement of a water molecule in the active site of the water-included CDK/indirubin-3′-oxime system. This resulted in a more conserved binding pattern than the water-excluded structure. Hence, in the design of new indirubin-like inhibitors, it is important to include the water molecule in the analysis. Figure Hydrogen bonding networks at the active sites of both CDK5/R-roscotivine (light grey) and CDK2/R-roscovitine (black).     

Evaluation of the binding effect and cytotoxicity assay of 2-Ethyl-5-(4-methylphenyl) pyramido pyrazole ophthalazine trione on calf thymus DNA: spectroscopic,calorimetric, and molecular dynamics approaches

With advances in new drug therapies, it is essential to understand the interactions between drugs and target molecules. In this study, we applied multiple spectroscopic techniques including absorbance, fluorescence, circular dichroism spectroscopy, viscosity, thermal melting, calorimetric, and molecular dynamics (MD) simulation to study the interaction between 2-Ethyl-5-(4-methylphenyl) pyramido pyrazole ophthalazine trione (PPF) and calf thymus DNA (ct DNA) in the absence or presence of histone H1. PPF exhibits a high binding affinity towards ct DNA in binary and ternary systems. In addition, the result for the binding constant was observed within the range 10⁴ M⁻¹ achieved through fluorescence quenching data, while the values for enthalpy and entropy changes for ct DNA–PPF and (ct DNA–H1) PPF complexes were measured to be −72.54 kJ.mol⁻¹, −161.14 J.mol⁻¹ K⁻¹, −85.34 kJ.mol⁻¹, and −19.023 J.mol⁻¹ K⁻¹, respectively. Furthermore, in accordance with circular dichroism spectra, the inducement of ct DNA structural changes was observed during binding of PPF and H1 in binary and ternary system forms. The essential roles of hydrogen bonding and van der Waals forces throughout the interaction were suggested using thermodynamic parameters. According to the obtained data, the interaction mode of ct DNA–PPF and (ct DNA–H1) PPF complexes was intercalation binding. Suggested by the MD simulation study, the ct DNA–H1 complex caused a reduction in the stability of the DNA structure in the presence or absence of ligand, which demonstrated that PPF as an intercalating agent can further distort the structure. The information achieved from this study will be very helpful in understanding the effects of PPF on the conformational state of ct DNA in the absence or presence of the H1 molecule, which seems to be quite significant for clarifying the mechanisms of action and its pharmacokinetics.     

2-Amino-5-substituted-1,3,4-oxadiazole as chemosensor for Ni(II) ion detection: antifungal,antioxidant, DNA binding,and molecular docking studies

An oxadiazole derivative 2 was prepared by condensation reaction through cyclization of semicarbazone in the presence of bromine; the structural confirmation was supported by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, Fourier transform-infrared spectroscopy, and liquid chromatography-mass spectrometry. Its sensing ability towards Ni²⁺ ion was examined showing a binding constant of 1.04 × 10⁵ compared with other suitable metal cations (Ca²⁺, Co²⁺, Cr³⁺, Ag⁺, Pb²⁺, Fe³⁺, Mg²⁺, and K⁺) using ultraviolet–visible (UV–vis) and fluorescence spectroscopic studies. The minimum concentration of Ni²⁺ ions and limit of detection was found to be 9.4 μM. A job's plot gave the binding stoichiometry ratio of oxadiazole derivative 2 vs Ni²⁺ ions as 2:1. Furthermore, the intercalative binding mode of oxadiazole derivative 2 with calf thymus DNA was supported by ultraviolet–visible (UV–vis) and fluorescent light, viscosity, cyclic voltammetry, time-resolved fluorescence, and circular dichroism measurements. The molecular docking result gave the binding score for oxadiazole derivative 2 as −6.5 kcal/mol, which further confirmed the intercalative interaction. In addition, the antifungal activity of oxadiazole derivative 2 was also screened against several fungal strains (C. albicans, C. glabrata, and C. tropicalis) by broth dilution and disc diffusion methods. In antioxidant studies, the oxadiazole derivative 2 showed potential scavenging activity against 2,2-diphenyl-1-picrylhydrazyl and H₂O₂ free radicals.