Germination ecology of coastal plants in relation to salt environment

Responses of seed germination to salinity were examined using 37 species collected from salt marshes, cliffs, and fore (unstable) and hind (stable) sand dunes along Japanese coasts. For comparison, seed germination of nine inland species was also examined. The soil salinities in salt marshes ranged from 150 to 300 mmol/L NaCl, whereas those in fore and hind dunes ranged from 0 to 150 mmol/L NaCl, with a few exceptions. Cliff soils showed relatively high salinities up to 300 mmol/L NaCl. Ciff and foredune soils that encountered a typhoon and storm showed high salinities >300 mmol/L NaCl. Salt tolerance in seed germination of coastal plants was ordered by comparing the responses of percentage and rate of germination to salinity conditions up to 200 mmol/L NaCl, being in the order of salt marsh>cliff>foredune≅hind dune≅inland. Thse results indicate that salt tolerance in seed germination of coastal plants is closely related to the salinity conditions of their habitats. Germination experiments under favorable conditions showed that a high percentage of the seeds of salt marsh species germinate rapidly, those of diff species germinate slowly and those of foredune species exhibit a low percentage and low rate of germination. It seems that these germination characteristics contribute to the success of germination at the ‘safe site’ and the subsequent survivorship of emerged plants in their natural habitats.     

Optimal seasonal timing of univoltine and bivoltine insects

This study examines the optimal seasonal timing of the life cycle for univoltine and bivoltine insects, assuming that resource availability has a peak in the middle of a year and is symmetric around it. Results show that if the growth rate increases in proporrion to the bodyweight, bivoltine life cannot be optimal. If the growth rate is a power function of the bodyweight with a power smaller than unity, a symmetric bivoltine solution can be the optimal provided that the resource availability has a plateau in the middle of the season. If the resource availability has a sharp peak, the optimal pattern is an asymmetric bivoltine solution in which the larval periods of two generations differ in length. The bivoltine life cycle is more likely to be superior to the univoltine one if: growth is fast, suitable growing season is long, biomass loss during nonlarval stages is small, and egg size is small.     

The regulatory status of the fixL- and fixJ-like genes in Bradyrhizobium japonicum may be different from that in Rhizobium meliloti

Summary The cloning, sequencing and mutational analysis of the Bradyrhizobium japonicum symbiotic nitrogen fixation genes fixL and fixJ are reported here. The two genes were adjacent and probably formed an operon, fixLJ. The predicted FixL and FixJ proteins, members of the two-component sensor/regulator family, were homologous over almost their entire lengths to the corresponding Rhizobium meliloti proteins (approx. 50% identity). Downstream of the B. japonicum fixJ gene was found an open reading frame with 138 codons (ORF138) whose product shared 36% homology with the N-terminal part of FixJ. Deletion and insertion mutations within fixL and fixJ led to a loss of approximately 90% wildtype symbiotic nitrogen fixation (Fix) activity, whereas an ORF138 mutant was Fix⁺. In fixL, fixJ and ORF138 mutant backgrounds, the aerobic expression of the fixR-nifA operon was not affected. NifA itself did not regulate the expression of the fixJ gene. Thus, the B. japonicum FixL and FixJ proteins were neither involved in the regulation of aerobic nifA gene expression nor in the anaerobic NifA-dependent autoregulation of the fixRnifA operon; rather they appeared to control symbiotically important genes other than those whose expression was dependent on the NifA protein. The fixL and fixJ mutant strains were unable to grow anaerobically with nitrate as the terminal electron acceptor. Therefore, some of the FixJ-dependent genes in B. japonicum may be concerned with anaerobic respiration.     

In vivo ionizing irradiations produce deletions in the hprt gene of human T-lymphocytes

The hprt T-lymphocyte cloning assay, which detects mutations occurring in vivo in humans, has been used to examine mutants induced in patients receiving radioimmunoglobulin therapy (RIT) for cancer. Samples from 13 patients before treatment (controls) and 15 samples from 12 patients after treatment were studied for both mutant frequencies and molecular changes in the hprt mutant T-cell clones. Patients were studied up to 48 months after treatment. Post-RIT patients showed increased mutant frequencies as compared to pre-treatment values. T-cell receptor (TCR) gene analysis of mutant T-cell clones demonstrated that 84% arose independently, both pre- and post-treatment, which is the same proportion as seen in normal individuals. However, several individuals did show large sets of mutants with the same TCR gene rearrangement patterns. Molecular analysis of mutants demonstrated a greater proportion of mutations with hprt gene changes on Southern blots after RIT treatment than before (40% versus 20%). RIT increases the proportion of mutations with total rather than partial gene deletions or other gross structural changes compared to normal individuals or pre-treatment patients. These studies are defining the spectrum for radiation-induced hprt gene mutations in vivo in human T-lymphocytes.     

Application of a stability statistic to international maize yield trials

Summary Genotype x environment (GE) interaction encountered in experiments complicates genotype selection and varietal recommendation. The integration of yield and stability of genotypes into a single parameter may make selection and recommendation easier. Kang developed a rank-sum method that allows selection for both yield and the stability variance statistics ( _i ² or s _i ² ) of Shukla. The objective of this research was to compare the rank-sum selection method to selection based on yield alone in five international maize (Zea mays L.) yield trials. Ranks were assigned for yield (the highest mean yield received a rank of 1) and for _i ² and s _i ² (the lowest value received a rank of 1). The yield and _i ² ranks and/or the yield and s _i ² ranks for each genotype were summed. Each trial contained two reference entries (REs). Yield rank or rank-sum of each genotype was compared to yield rank or rank-sum of the best RE (BRE). GE interaction was significant for all trials. Heterogeneity in the GE interaction due to the linear effect of a covariate (differences in fertility and/or cultural practices) was significant in Trials 1, 2, and 5. Overall, in all trials, 29 genotypes were selected on the basis of yield alone. On the basis of _i ² and yield rank-sum, 32 genotypes were identified, with 11 being lower yielding than the 29 yield-based selections. On the basis of s _i ² and yield rank-sum, 31 genotypes were selected, with 11 being lower yielding than the yield-bases selections. Obviously, yield is sacrificed when the rank-sum method is used in the selection process. However, selection based on yield alone may not be adequate when GE interaction is significant because of testing in diverse environments.     

Expected utility maximization and selection of stable plant cultivars

Summary In most plant breeding programs, selection of the best commercially suitable cultivars for a target group of environments is based on information obtained from evaluation trials cultivated in a sample of environments. Information on the performance of cultivars collected in a sample of environments can only be approximate and, consequently, selection of the best cultivar involves choosing among cultivars that respond uncertainly in many environments. The agronomic and/or economic value of a cultivar across environments may be considered the general or overall utility of the cultivar. Data from a sample of environments therefore provides only an estimate of any cultivar's overall utility, with the overall goal of selection among all cultivars being the maximization of the expected utility. Within this frame-work, expected utility maximization, an approach to decision making that has been well developed in the disciplines of economics and statistics, can assist the plant breeder in making such decisions. This research was initiated (1) to determine how expected utility maximization might be used to develop indices that are useful for selecting broadly adapted plant cultivars, and (2) to determine how the breeder's preferences might affect choice of the best cultivar. The data used in this research were from USDA Regional Soybean Tests. The results indicated that expected utility maximization, which explicitly incorporates into the selection rule the plant breeder's preferences regarding stability, can be a useful aid in the selection of stable plant cultivars.     

Was “Lucy” more human than her “child”? Observations on early hominid postcranial skeletons

Fully adult partial skeletons attributed to Australopithecus afarensis (AL 288-1, “Lucy”) and to Homo habilis (OH 62, “Lucy's child”), respectively, both include remains from upper and lower limbs. Relationships between various limb bone dimensions of these skeletons are compared to those of modern African apes and humans. Surprisingly, it emerges that OH 62 displays closer similarities to African apes than does AL 288-1. Yet A. afarensis, whose skeleton is dated more than 1 million years earlier, is commonly supposed to be the ancestor of Homo habilis. If OH 62, classified as Homo habilis by its discoverers, does indeed represent a stage intermediate between A. afarensis and later Homo, a revised interpretation of the course of human evolution would be necessary.     

High-affinity folate binding in human liver membranes

High-affinity binding of³H-folate in Triton X-100 solubilized membranes of human liver displayed characteristics, e.g. apparent positive cooperativity, which are typical of specific folate binding. Ultrogel^® AcA 44 chromatography of solubilized membranes saturated with³H-folate revealed a major peak of 100 kDa and a minor peak of 25 kDa. The 100 kDa peak could represent a hydrophobic membrane associated molecular form of the protein. This notion was supported by the fact that the two peaks had identical molecular weights as determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis with immunoblotting.     

Hemoglobin Dallas (α97(G4)Asn→Lys):functional characterization of a high oxygen affinity natural mutant

Hemoglobin Dallas, an α-chain variant with a substitution of lysine for asparagine at position 97(G4), was found to have increased oxygen affinity ($\text{p}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{= 1}\text{mmHg at pH}\text{7.3}\text{and}\text{20°C), diminished cooperativity (0n,}\text{the Hill coefficient}\text{= 1.7}$) and reduced Bohr effect (about 50%). Addition of allosteric effectors (such as 2,3-diphosphoglycerate, inositol hexakisphosphate and bezafibrate) led to a decrease in oxygen affinity and increase in cooperative energy. Kinetic studies at pH 7.0 and 20°C revealed that (i), the overall rate of oxygen dissociation is 1.4-fold slower than that for HbA and (ii), the carbon monoxide dissociation rate is unaffected. The abnormal properties of this hemoglobin variant can be atttributed to a more ‘relaxed’ T-state.     

Electronic structure and molecular design of simplified polyimide systems

The electronic structures of newly designed polyimide systems (ethenetetracarboxylic 1,2:1,2-dianhydride-diaminoethyne (PI-A) and ethenetetracarboxylic 1,1:2,2-dianhydride-diaminoethyne(PI-B)) are studied in detail with respect to their optimized geometries on the basis of the one-dimensional tight-binding self-consistent field crystal-orbital method. The computational results have revealed that PI-B shows intriguing properties such as a very small band gap and a wide bandwidth near the frontier level, compared with PI-A and other polyimides. Since PI-B would be a promising candidate for a new electric conducting material, a reaction diagram for this polymer is also proposed.Also affiliated to Central Research Laboratories, Matsushita Electric Industrial Co., Moriguchi 570, Japan.