A multiple chemostat system for consortia studies on microbially influenced corrosion

A multiple chemostat system has been developed in which metal specimens can be exposed to a consortium of bacteria. The system comprises a single test chemostat containing the test specimen operated at a high dilution rate to facilitate the wash out of planktonic bacteria, selecting for attached or biofilm growth. This chemostat is fed at a steady low rate by a number of separate chemostats each of which contains a pure axenic culture of one member of the consortium being tested. This system has the advantage of providing a continual inoculum of the test species to the test specimen allowing both aerobic and anaerobic bacteria to be grown in the same system. Constant levels of three bacterial types were maintained in the system: Pseudomonas aeruginosa, Thiobacillus ferrooxidans and Desulfovibrio vulgaris. Exposure of 316L stainless steel electrodes to this system resulted in increased corrosion of coupons exposed biotically, as compared to those exposed abiotically. A current monitoring technique and electrochemical impedance spectroscopy were used to evaluate effects of bacteria on metallic corrosion.     

A proton-deuterium exchange study of three types ofDesulfovibrio hydrogenases

Summary Hydrogenases are among the main enzymes involved in bacterial anaerobic corrosion of metals. The study of their mode of action is important for a full comprehension of this phenomenon. The three types ofDesulfovibrio hydrogenases [(Fe), (NiFe), (NiFeSe)] present different patterns in the pH dependence of their activity. The periplasmic enzyme fromDesulfovibrio salexigens and the cytoplasmic enzyme fromDesulfovibrio baculatus both have pH optima at 7.5 for H₂ uptake and 4.0 for H₂ evolution and H⁺–D₂ exchange reaction (measured by membrane-inlet mass-spectrometry). The H₂ to HD ratio at pH above 5.0 is higher than 1.0. The periplasmic hydrogenase fromD. gigas presents the same pH optimum (8.0) for the H⁺–D₂ exchange as for H₂ consumption. In contrast, the enzyme fromD. vulgaris has the highest activity in H₂ production and in the exchange at pH 5.0. Both hydrogenases have a H₂-to-HD ratio below 1.0.     

Effects of external stimuli on environmental bacterial strains harboring analgD-lux bioluminescent reporter plasmid for the study of corrosive biofilms

An alginic acid biosynthesis bioluminescent reporter plasmid, pUTK50, was transconjugated into environmental strains ofPseudomonas putida, Pseudomonas fluorescens, andStenotrophomonas maltophilia. Bioluminescent transconjugates were selected from each strain for investigation of environmental stress factors that promote alginic acid exopolymer biosynthesis in developing biofilms. Environmental stimuli associated with increased levels of alginate synthesis, in a previously developed organism,P. aeruginosa FRD1, were applied to the environmental strains. Increased salt concentrations and higher ratios of nitrate vs ammonium ions as the limiting nitrogen source induced bioluminescence in FRD1 and the environmental strains. However, for environmental strains ofP. putida, P. fluorescens andS. maltophilia, polysaccharides were detected with low uronic acids content and different structural components. When tested within a biofilm,S. maltophilia O46 demonstrated exceptional adhesive and corrosive properties while alginic acid synthesis was not high. In most of the environmental strains, periods of increased bioluminescence were induced by external stimuli, but exopolysaccharides other than alginic acid were expressed. It is hypothesized that the environmental strains have homologous but nonidentical promoter sequences which are responsive to certain environmental stimuli and may control genes necessary for the production of alternative exopolysaccharides.     

Topography of short portal vessels in the rat pituitary gland: a scanning electron-microscopic and morphometric study of corrosion cast replicas

We applied scanning electron microscopy combined with imaging and morphometric techniques to analyze the dorsal topography and morphology of short portal vessels linking the capillary beds of the pituitary neural and anterior lobes in adult male albino rats. The pituitary microvasculature was replicated by intracarotid injection of Batson's No. 17 compound producing plastic casts that were advantageous for comprehensive morphometric analyses using an imaging device. The analysis revealed the existence of two types of portal vessels having quantitatively different morphological properties. The bilateral venular plexus of 3–4 vessels located at the base of the infundibular stalk (each venule measuring 300 m in length and 32 m in diameter) appears to be the major part of the short portal system in the dorsum of the rat pituitary gland. Narrower capillary-like shunt vessels (6.8 m in diameter), of about the same length as the venules, were situated throughout other subregions of the intermediate lobe cleft. The short portal vessels of both types made direct anastomoses with the capillary networks in the neural and anterior lobes. The neural lobe capillaries were twice as numerous (1324 per mm²), and only half as wide (6.2 m), as the sinusoidal capillaries in the anterior lobe (density of 637 per mm²; diameter of 13.7 m). The topographical position of the portal venular system suggests that the caudolateral subregions of the pituitary neural and anterior lobes have a functional relationship dependent on rapid interlobe transfer of neurohumoral factors such as hormones via the portal blood. This process appears to be supplemented throughout the rest of the cleft between the two lobes by a small number of capillary shunts that supply the epithelial cell lobules of the intermediate lobe in situ. The findings collectively indicate that this portal system provides a constant stream of neurohumoral information that is shared moment-by-moment between the pituitary neural and anterior lobes.     

Steel Anti-Corrosion Strategy Enables Long-Cycle Zn Anode

The progress of aqueous zinc batteries (AZBs) is limited by the poor cycling life due to Zn anode instability, including dendrite growth, surface corrosion, and passivation. Inspired by the anti-corrosion strategy of steel industry, a compounding corrosion inhibitor (CCI) is employed as the electrolyte additive for Zn metal anode protection. It is shown that CCI can spontaneously generate a uniform and ≈30 nm thick solid-electrolyte interphase (SEI) layer on Zn anode with a strong adhesion via Zn O bonding. This SEI layer efficiently prohibits water corrosion and guides homogeneous Zn deposition without obvious dendrite formation. This enables reversible Zn deposition and dissolution for over 1100 h under the condition of 1 mA cm⁻² and 1 mAh cm⁻² in symmetric cells. The Zn-MnO₂ full cells with CCI-modified electrolyte deliver an ultralow capacity decay rate (0.013% per cycle) at 0.5 A g⁻¹ over 1000 cycles. Such an innovative strategy paves a low-cost way to achieve AZBs with long lifespan.     

Studies on microbiologically influenced corrosion of SS304 by a novel manganese oxidizer,Bacillus flexus

A manganese oxidizing bacterium was isolated from the surface of steel scraps and biochemical tests and 16S rRNA sequencing analysis confirmed the isolate as Bacillus flexus. Potentiodynamic polarization curves showed ennoblement of open circuit potential, increased passive current, a lowering of breakdown potential, active re-passivation potential and enhanced cathodic current in the presence of B. flexus. Adhesion studies with B. flexus on SS304 specimens with different surface treatments demonstrated decreased adhesion on passivated and FeCl₃ treated specimens due to the removal of MnS inclusions. The present study provides evidence that surface treatment of stainless steels can reduce adhesion of this manganese oxidizing bacterium and decrease the probability of microbiologically influenced corrosion.     

Corrosion of aluminum alloy 2024 by microorganisms isolated from aircraft fuel tanks

Abstract

Microorganisms frequently contaminate jet fuel and cause corrosion of fuel tank metals. In the past, jet fuel contaminants included a diverse group of bacteria and fungi. The most common contaminant was the fungus Hormoconis resinae. However, the jet fuel community has been altered by changes in the composition of the fuel and is now dominated by bacterial contaminants. The purpose of this research was to determine the composition of the microbial community found in fuel tanks containing jet propellant-8 (JP-8) and to determine the potential of this community to cause corrosion of aluminum alloy 2024 (AA2024). Isolates cultured from fuel tanks containing JP-8 were closely related to the genus Bacillus and the fungi Aureobasidium and Penicillium. Biocidal activity of the fuel system icing inhibitor diethylene glycol monomethyl ether is the most likely cause of the prevalence of endospore forming bacteria. Electrochemical impedance spectroscopy and metallographic analysis of AA2024 exposed to the fuel tank environment indicated that the isolates caused corrosion of AA2024. Despite the limited taxonomic diversity of microorganisms recovered from jet fuel, the community has the potential to corrode fuel tanks.     

Effect of photosynthetic biofilms on the open‐circuit potential of stainless steel

Periodic illumination of photosynthetic biofilms on AISI* 316L stainless steel resulted in evolution of oxygen (1–7 mg.1^‐1) and a corresponding increase in open circuit potential (E_corr) from 2 to 15 mV. The change in E^ depended on the interval of illumination. When the dark cycle began, elevation in potential was followed by an immediate drop. Illumination did not affect E_corr in sterile systems or in systems that contained only nonphotosynthetic eubacteria. Radiated heat from illumination accounted for changes of 4 to 5°C in temperature which, in the absence of oxygen production, should decrease dissolved oxygen by 0.75 mgl^‐1 and decrease E_corr by 1 mV. Positive shifts of E_corr induced by periodic illumination of photosynthetic biofilms are primarily the result of oxygen production.     

The use of biocides to control sulphate‐reducing bacteria in biofilms on mild steel surfaces

Three different types of biocides, viz. formaldehyde (FM), glutaraldehyde (GA) and isothiozolone (ITZ) were used to control planktonic and sessile populations of two marine isolates of sulphate‐reducing bacteria (SRB). The influence of these biocides on the initial attachment of cells to mild steel surfaces, on subsequent biofilm formation and on the activity of hydrogenase enzymes within developed biofilms was evaluated. In the presence of biocides the rate and degree of colonization of mild steel by SRB depended on incubation time, bacterial isolate and the type of biocide used. Although SRB differed in their susceptibility to biocides, for all isolates the biofilm population was more resistant to the treatment than the planktonic population. GA showed highest efficiency in controlling planktonic and sessile SRB compared with the other two biocides. The activity of the enzyme hydrogenase measured in SRB biofilms varied between isolates and with the biocide treatment. No correlation was found between the number of sessile cells and hydrogenase activity.     

Influence of fouling on the efficiency of sacrificial anodes in providing cathodic protection in Southeast Asian tropical seawater

Aluminum and zinc based sacrificial anodes are routinely used to provide corrosion protection to metals (typically steel) exposed to seawater, for example in steel pipelines and storage tanks. However, the high fouling rates experienced in South East Asia means that both the anodes and the metals to be protected rapidly become coated with macrofoulers, which could potentially prevent the anodes from being effective. The present study, involving exposure tests of up to 18 months, indicates that both aluminum and zinc sacrificial anodes remain effective even after being completely coated with biofouling. Furthermore, it was easier to remove the biofouling on the cathodically protected samples than on their unprotected counterparts, possibly due to the higher local pH produced by cathodic protection at the metal and seawater interface.