Stable octameric structure of recombinant hemoglobin alpha(2)beta(2)83 Gly-->Cys

We have engineered a recombinant hemoglobin (rHb betaG83C) based on the variant Hb Ta-Li, which oligomerizes through intertetramer disulfide bonds. Size exclusion chromatography and electrospray ionization mass spectrometry show that the rHb betaG83C assembles into an oligomeric structure the size of a dimer of tetramers. The oligomer has carbon monoxide-binding properties similar to those of natural human hemoglobin. Unlike HbA, the oligomer does not participate in dimer exchange. The CO kinetics, auto-oxidation rate, and gel filtration experiments on the oligomeric betaG83C did not show the usual concentration dependence, implying that it does not dissociate easily into smaller species. The octamer could be dissociated by the use of reducing agents. The action of reduced glutathione on oligomeric betaG83C exhibited biphasic kinetics for the loss of the octameric form, with a time constant for the rapid phase of about 2 h at 1 mM glutathione. However, the size of oligomer betaG83C was not modified after incubation with fresh plasma.     

A natural compound (reuterin) produced by Lactobacillus reuteri for hemoglobin polymerization as a blood substitute

Stroma-free hemoglobin (Hb) has been modified by pyridoxylation and followed by polymerization with glutaraldehyde as a blood substitute. Nevertheless, the reaction rate of pyridoxylated Hb (PLP-Hb) with glutaraldehyde is too fast to control its molecular weight distribution. Additionally, it was reported that glutaraldehyde is cytotoxic even at low doses. To overcome these problems, another aldehyde, beta-hydroxypropionaldehyde (beta-HPA), was used in the study to polymerize hemoglobin (PLP-Hb). beta-HPA is a natural compound (reuterin) produced by Lactobacillus reuteri. It was found that the maximum degree of PLP-Hb polymerization by reuterin (RR-PLP-Hb) was approximately 40% if the formation of high molecular (> 500 kDa) polymers should be prevented. In contrast, at the same reaction condition, the glutaraldehyde-polymerized PLP-Hb solution became gel-like, due to overpolymerization. This indicated that the rate of PLP-Hb polymerization by reuterin was significantly slower than that by glutaraldehyde. With increasing the reaction temperature, PLP-Hb concentration, or reuterin-to-PLP-Hb molar ratio, the time to reach the maximum degree of PLP-Hb polymerization by reuterin became significantly shorter. Removal of unpolymerized PLP-Hb from the RR-PLP-Hb solution can be effectively achieved by a gel-filtration column. The P(50) value of the unmodified Hb solution was 14 torr, while that of the RR-PLP-Hb solution was 20 torr, an indication of lower oxygen affinity. Additionally, the oxygen-Hb dissociation curves for both test solutions had a sigmodial shape and a nearly 100% saturation at 100 torr. In the in vivo study, it was found that the animals treated with the RR-PLP-Hb solution all survived and remained healthy more than 3 months. In contrast, only one out of six rats survived for the control group treated with the unmodified Hb solution. Furthermore, it was found that the RR-PLP-Hb solution resulted in a significantly longer circulation time ( approximately 12 h) than the unmodified Hb solution ( approximately 1.5 h). These results suggest that the reuterin-polymerized PLP-Hb solution may be a new option in the development of blood substitutes.     

A novel tetrafunctional reagent for simultaneous intramolecular and intermolecular cross-linking of bovine hemoglobin

A novel tetrafunctional reagent, alpha,gamma,alpha',gamma'-tetra-succinimidyl-hexanediamide-di-glutamate ester (HDG(OSu)(4)), was successfully synthesized, and a well-defined cross-linked bovine hemoglobin (mainly 128 kDa) was prepared with this reagent. Due to the spatial structure of this cross-linking reagent, the intramolecular and intermolecular cross-linking of bovine hemoglobin was formed simultaneously in one reaction. Although the cross-linked bovine hemoglobin showed a slight decrease in half-saturated O(2) pressure value (P(50), from 28.1 mm Hg to 21.7 mm Hg) and Hill coefficient (from 2.5 to 2), due to the cross-linkage, it still performed well for O(2) delivery.     

The effect of Salinum on the symptoms of dry mouth: a pilot study

The effect of a new saliva substitute. Salinum®, was tested in 37 patients with severe symptoms of reduced salivation. The majority of the patients had suffered from hyposalivation and dry mouth for more than 8 years. The saliva substitute consisted of a water soluble extract of linseed. The physical properties of this extract are similar to those of the glycoproteins of the salivary secretions. The patients used the saliva substitute for a seven days period. Prior to the use of the extract the patients reported that the most severe symptoms of decreased salivation were a feeling of dryness in the mouth and burning sensations in the tongue, pharynx and oesophagus, The majority of the patients reported that the use of Salinum reduced the symptoms of hyposalivation. Great variation in effect occurred from patient to patient. Generally the patients with the most severe symptoms experienced the greatest relief of the symptoms when they used Salinum. Although of short duration the results of this pilot study indicate that an extract of linseeds may compensate for some aspects of the consequences of reduced salivation. Further studies are needed to elucidate the feasibility of the extract as saliva replacement.     

Inability of the human fecal microflora to metabolize the nonabsorbable fat substitute,olestra

Summary Olestra is a non-caloric fat substitute under review by the Food and Drug Administration. It consists of a mixture of octa-, hepta- and hexaesters of sucrose formed with long chain fatty acids. Previous studies showed olestra is not hydrolyzed by mammalian lipases and is not absorbed. The objective of this study was to evaluate the potential for colonic microflora to metabolize olestra after continued exposure. Neat and emulsified¹⁴C-[fatty acid] olestra was incubated for 72 h in both minimal and organically-enriched anaerobic media inoculated with feces from seven subjects who had consumed olestra (9 g per day) over a 3–4 week period.¹⁴C-sucrose and¹⁴C-glucose served as positive controls. Production of¹⁴CO₂,¹⁴CH₄,¹⁴C-volatile fatty acids (VFAs) and¹⁴C-long chain fatty acids (LCFAs) was determined. In addition, the ester distribution and fatty acid composition of olestra were examined before and after incubation. Significant quantities of¹⁴CO₂ and¹⁴C-VFAs were generated from the¹⁴C-sugars, indicating that the microflora were active under the incubation conditions. Furthermore, free oleic acid was extensively hydroxylated and hydrogenated. In contrast, no degradation products (gas, VFAs, LCFAs) or changes in the olestra resulting from bacterial activity were detected. These results indicate that under anaerobic conditions the colonic microflora of the humans, consuming olestra, did not metabolize olestra.     

Multistep production of bioengineered skin substitutes: Sequential modulation of culture conditions

Many studies are being conducted to define the role of growth factors in cutaneous physiology in order to add cytokines in a timely fashion for optimal tissue engineering of skin. This study is aimed at developing a multistep approach for the production of bioengineered skin substitutes, taking into account the effects of various growth factors according to the culture time. The use of a serum-supplemented medium throughout the whole culture period of skin substitutes was compared to the sequential use of specific additives at defined culture steps. Histological analysis revealed that serum was necessary for keratinocyte proliferation and migration on dermal substitutes during the first 2 d after their seeding. However, the serum-free medium presented some advantages when supplemented with different additives at specific culture steps. Interestingly, ascorbic acid added to the dermal substitutes before and after keratinocyte seeding maintained their cuboidal morphology in the basal epidermal layer. In the absence of serum, collagen matrix degradation slowed down, and a better multilayered epidermal organization was obtained, notably with retinoic acid. Stratum corneum formation was also enhanced by fatty acids. Thus, sequential addition of exogenous factors to the medium used to produce skin substitutes can improve their structural features and functional properties in vitro.     

High O2 affinity hemoglobin-based oxygen carriers synthesized via polymerization of hemoglobin with ring-opened 2-chloroethyl-beta-D-fructopyranoside and 1-o-octyl-beta-D-glucopyranoside

Second generation hemoglobin-based O(2) carriers (HBOCs) are being developed with high O(2) affinity (low P(50)) in order to suppress vasoconstriction elicited by over-oxygenating tissues, a problem associated with low O(2) affinity first generation HBOCs. Our group has previously investigated the polymerization of hemoglobin (Hb) with dialdehydes as a strategy for engineering high O(2) affinity HBOCs. In this study, two novel reactive dialdehydes were synthesized by ring-opening 2-chloroethyl-beta-D-fructopyranoside (2-CEFP) and 1-o-octyl-beta-D-glucopyranoside (1-OGP) at the 1,2-diol position, respectively, to yield novel Hb polymerizing reagents. High-affinity polymerized HBOCs were synthesized by reacting R-state bovine hemoglobin (bHb) with ring-opened 2-CEFP and 1-OGP at cross-linker to bHb molar ratios ranging from 10:1 to 30:1. The resulting polymerized bovine HBOCs (bHBOCs) displayed P(50)s ranging from 7 to 18 mmHg, cooperativities ranging from 0.8 to 1.4, and methemoglobin (metHb) levels ranging from 3% to 10%. The cross-linking reaction also stabilized the third stepwise Adair coefficient for bHbs reacted with ring-opened 1-OGP at cross-linker to bHb molar ratios of 20:1 and 30:1 and for bHbs reacted with ring-opened 2-CEFP at molar ratios of 30:1. Additionally, the number-averaged molecular weight, M(n), of each polymerized bHBOC was larger compared to bHb. Molecular weight distributions leaning towards larger molecular weight bHBOCs were obtained by increasing the cross-linker to bHb molar ratio. Taken together, the results of this study have identified novel Hb polymerization reagents that are easy to synthesize, and that are capable of yielding bHBOCs with higher O(2) affinities and weight-averaged molecular weights compared to bHb.     

有和无甘油的聚丙烯酰胺胶在检测突变时的差别

有文献报道在非变性的聚丙烯酰胺中加入甘油可提高SSCP检测的灵敏度。我们的实验结果建议研究者在进行SSCP筛查未知突变时最好采用不加甘油的非变性的聚丙烯酰胺胶,这既省力省钱,又灵敏。在判读SSCP胶时,千万不要看到在双链带位置有一条比正常迁移率慢的带就判定为插入突变。此时要判定突变的性质,最好测序。 Abstract：It was reported that glycerol in the non-denatured SSCP polyacrylamide gel could increase the sensibility of detecting mutation. We detected the mutation of PKD 1 gene in the patients with autosomal dominant polycystic kidney disease.PCR com bined with SSCP(single-strained conformation polymorphism),the non-denatured 10% polyacrylamide gel without glycerol or 10% polyacrylamide gel with 5% glycerol and DNA sequencing method were used.Our results showed that four single strand b ands were found in the non-denatured polyacrylamide gel without glycerol while t wo single strand bands were found in the polyacrylamide gel with glycerol in the same patient.Sequence showed there is a deletion of G in one DNA molecular and a G→A substitution in another DNA molecular in the patient with abnormal shift SSCP bands.Therefore, our experiment suggested that non-denat ured polyacrylamide gel was better than the polyacrylamide gel with glycerol in detection mutation,and it will save labor and money.It also suggeste d that one basedeletion can cause a slow double-strand DNA following the normal double strand band,which was caused by the heterogeneous DNA molecule formed bet ween the normal DNA strand and the one base deletion DNA strand with the protrud ing base.Our results suggest that when judging mutation in SSCP gel,it is not re liable to decide that mutation is inversion according to slow mobility in the ge l,and when the characteristic of mutation need to be judged,it must be sequenced .     

中国北部六种沙蒿的地理替代规律及其主导生态因子

对广泛分布于中国北部草原区沙地与荒漠区的6种沙蒿进行野外实地考察、标本查阅、分布区气象数据搜集与土壤成分测定,通过分析得到以下结果:1差不嘎蒿为东蒙古-科尔沁分布种,褐沙蒿是浑善达克沙地分布种,黑沙蒿为腾格里-鄂尔多斯分布种,白沙蒿为戈壁-蒙古种,准噶尔沙蒿为中亚种,乌丹蒿为科尔沁沙地西部种。2黑沙蒿、褐沙蒿、差不嘎蒿呈现出从西南向东北的地理替代分布,白沙蒿与准噶尔沙蒿构成东西向的地理替代分布。乌丹蒿由于与另几个种的亲缘关系较远,不作为这几个种的地理替代种。3利用方差分析的方法分析了5种沙蒿分布区内的热量、水分及土壤指标的差异,在黑沙蒿、褐沙蒿与差不嘎蒿这一地理替代中,黑沙蒿在年均温、最冷月均温、年较差、寒冷指数、6～7月份降水、湿润指数、水热综合因子、土壤酸碱度、土壤全磷含量上均与另两个种存在着显著差异。黑沙蒿向东北被褐沙蒿所替代,应该是水热以及土壤因子的综合作用。褐沙蒿与差不嘎蒿分布区内,主要是5～6月份的降水存在着显著差异,也就是生长季前半期的干旱是褐沙蒿区别于差不嘎蒿并使两者之间发生替代的原因。对于白沙蒿与准噶尔沙蒿这一对地理替代种,同样是降水的变率是两者发生替代的原因。     

Development of a dermal matrix from glycerol preserved allogeneic skin

Dermal substitutes can be used to improve the wound healing of deep burns when placed underneath expanded, thin autologous skin grafts. Such dermal matrix material can be derived from xenogeneic or human tissue. Antigenic structures, such as cells and hairs must be removed to avoid adverse inflammatory response after implantation. In this study, a cost-effective method using low concentrations of NaOH for the de-cellularization of human donor skin preserved in 85% glycerol is described. The donor skin was incubated into NaOH for different time periods; 2, 4, 6 or 8 weeks. These dermal matrix prototypes were analyzed using standard histology techniques. Functional tests were performed in a rat subcutaneous implant model and in a porcine transplantation model; the prototypes were placed in full thickness excision wounds covered with autologous skin grafts. An incubation period of 6 weeks was most optimal, longer periods caused damage to the collagen fibers. Elastin fibers were well preserved. All prototypes showed intact biocompatibility in the rat model by the presence of ingrowing blood vessels and fibroblasts at 4 weeks after implantation. An inflammatory response was observed in the prototypes that were treated for only 2 or 4 weeks with NaOH. The prototypes treated with 6 or 8 weeks NaOH were capable to reduce wound contraction in the porcine model. In neo-dermis of these wounds, elastin fibers derived from the prototype could be observed at 8 weeks after operation, surrounded by more random orientated collagen fibers. Thus, using this effective low cost method, a dermal matrix can be obtained from human donor skin. Further clinical studies will be performed to test this material for dermal substitution in deep (burn) wounds.