Effect of nutrient level on competition intensity in the field for three coexisting grass species

A field experiment encompassing both neighbour- and nutrient-manipulations was conducted in a nutrient-impoverished old-field habitat to investigate how the intensity of plant competition was affected by soil nutrient level. Three perennial grasses were used as target species: Agropyron repens, Poa pratensis and Phleum pratense. Neighbour manipulations involved the removal (through herbicide application) of all neighbouring vegetation within a 20 cm or 40 cm radius around target plants. Target performance was measured under five levels of added nutrients (N-P-K) in both the neighbour-removal plots and in non-removal (control) plots. Both neighbour and nutrient manipulations had a highly significant effect on both biomass and tiller production but the interaction between these treatments was generally insignificant. Below-ground/above-ground biomass quotient was affected only by neighbour manipulations and was greatest in the control plots (with no neighbours removed) for all three species. The suppressive effect of neighbours was not markedly affected by nutrient level. However, yield suppression showed a significant decreasing trend with increasing nutrient level for biomass production in Agropyron and an increasing trend for tiller production in Phleum. For Poa, there was no trend in the intensity of competition across nutrient level. The results suggest that the general intensity of competition within this community neither increases nor decreases with increasing nutrient level. Rather, coexisting species appear to respond individually in terms of the intensity of competition that they experience. These results conflict with predictions from the triangular C-S-R model of plant strategies. However, they are consistent with a recently modified ‘habitat templet’ model for vegetation.     

Elimination of apple stem grooving virus by chemotherapy and development of an immunocapture RT-PCR for rapid sensitive screening

Ombuin (7,4′-dimethyl quercetin) (10 μg ml^-1, for 12 wk), glycyrrhizin/quercetin (80 μg ml^-1and 10 μg ml^-1respectively, for 18 wk), ribavirin (10 μg ml^-1, for 12 wk) and quercetin/ribavirin (10 μg ml^-1each, for 9–12 wk) reduced the titre of apple stem grooving virus (ASGV) when applied in vitro to infected tissue cultures of Nicotiana occidentalis obliqua Wheeler, and/or Malus domestica. ASGV was not detectable in both plant species after the quercitin/ribavirin treatment when tested by ISEM, herbaceous host indexing, RT-PCR, and immunocapture RT-PCR. A sensitive immunocapture RT-PCR procedure for the detection of ASGV was developed for the screening of treated samples to assess antiviral activity.     

Production of entomopathogenic nematodes in submerged monoxenic culture: A review

Monoxenic liquid culture is the most suitable technology for scaling up to industrial production of entomopathogenic nematodes (EPNs); however, the variability of the yield production remains a current problem in the process. The aim of this study was to analyze the parameters and criteria for EPN production in liquid culture based on scientific and technological knowledge from the last two decades. While experimental research has permitted the yield production of Heterorhabditis bacteriophora (362 × 10³ infective juveniles [IJs]/ml) and Steinernema carpocapsae (252 × 10³ IJs/ml), simultaneously, theoretical approaches have contributed to the understanding of the culture process, based on biological parameters of the bacterium–nematode complex and hydrodynamic and rheological parameters of the complex gas–liquid–solid system. Under this interdisciplinary research approach, bioprocess and biosystem engineering can contribute to design the various control strategies of the process variables, increase the productivity, and reduce the variability that until now distinguishes the in vitro production of EPNs by the liquid culture.     

Standardizing Immunohistochemistry: A New Reference Control for Detecting Staining Problems

A new standardized immunohistochemistry (IHC) control for breast cancer testing comprises formalin-fixed human epidermal growth factor receptor 2, estrogen receptor, or progesterone receptor peptide antigens covalently attached to 8-µm glass beads. The antigen-coated beads are suspended in a liquid matrix that hardens upon pipetting onto a glass microscope slide. The antigen-coated beads remain in place through deparaffinization, antigen retrieval, and immunostaining. The intensity of the beads’ stain provides feedback regarding the efficacy of both antigen retrieval and immunostaining. As a first report, we tested the sensitivity and specificity of the new IHC controls (“IHControls”). To evaluate sensitivity, various staining problems were simulated. IHControls detected primary and secondary reagent degradation similarly to tissue controls. This first group of IHControls behaved similarly to tissue controls expressing high concentrations of the antigen. The IHControls were also able to detect aberrations in antigen retrieval, as simulated by sub-optimal times or temperatures. Specificity testing revealed that each antigen-coated bead was specific for its cognate IHC test antibody. The data support the conclusion that, like tissue controls, IHControls are capable of verifying the analytic components of an immunohistochemical stain. Unlike tissue controls, IHControls are prepared in large bulk lots, fostering day-to-day reproducibility that can be standardized across laboratories.     

Use of two formulations and two application techniques to deliver Bacillus thuringiensis var. israelensis for the control of Musca domestica (Diptera: Muscidae) larvae and adults in poultry houses

A field study was carried out for 6 wks to assess, from both an efficiency and economic perspective, the effect of individual and integrated success of feeding and topical applications of two formulations of Bacillus thuringiensis var. israelensis (Bti) in controlling house fly (Musca domestica L.) larvae and adults in poultry houses. There was no significant difference between the 1 g and 2 g L^?1 spray applications of Bti. In the absence of spray applications, no significant differences in larval mortalities were observed between the 250 mg and 500 mg kg^?1 feed applications. The percentage mortality of larvae accomplished as a result of using a combination of 250 mg kg^?1Bti feed and 2 g L^?1 spray applications was equivalent to that obtained as a result of combining 500 mg kg^?1Bti and 1g L^?1 spray applications. Treatment with Bti caused significant reductions in the emergence (up to 74%) of house fly adults compared to the control. The fact that the emergence of adult house flies was affected by Bti treatments implies that Bti has sublethal effects on house fly larvae. The cost–benefit analysis (expressed in terms of mortality of larvae growing) indicated that the most effective combination for house fly larvae and adult house fly emergence control was the 500 mg kg^?1 of feed and 2 g L^?1 spray application combination that resulted in 67% larval mortality and a 74% decrease in adult house fly emergence. This study presents commercial users with various alternatives for possible combinations of the two Bti formulations.     

Current levels of suppression of waterhyacinth in Florida USA by classical biological control agents

Waterhyacinth, Eichhornia crassipes (Mart.) Solms (Pontederiaceae), has been a global target for classical biological control efforts for decades. In Florida, herbicidal application is the primary control method employed, usually without regard for the activities of the three biological control agents introduced intentionally during the 1970s, namely Neochetina eichhorniae Warner, Neochetina bruchi, Hustache (Coleoptera: Curculionidae), and Niphograpta albiguttalis Warren (Lepidoptera: Crambidae). A series of field experiments from 2008 to 2010 was conducted at four Florida sites using an insecticide-check approach to quantify the current levels of suppression provided by these agents. In the field N. albiguttalis was rarely found while more than 99% of all Neochetina sp. adults were N. eichhorniae. Although it was not possible to disentangle the relative impacts of Neochetina sp. adults from larvae on individual plant variables, the larvae played a major role in reducing plant biomass and the number of inflorescences. Plots exposed to unrestricted herbivory contained 58.2% less biomass and produced 97.3% fewer inflorescences at the end of the experiments. Despite these large reductions, herbivory decreased waterhyacinth coverage by only 16.8% and most of this was attributed to a low-nutrient site where coverage was reduced disproportionately. Overall, coverage trended upwards during the course of the experiments and was always close to 100% when the plots were harvested. Although coverage is a somewhat arbitrary metric, especially for floating plants subject to compression and dispersion, it influences the perception of biological control efficacy which, in turn, directly influences herbicide management decisions in Florida. Despite waterhyacinth populations that now produce less than half as much biomass and up to 98% fewer seeds than before the deployment of biological control agents, the overall approach used to achieve maintenance control of the plant in Florida will probably not change unless new biological control agents, such as Megamelus scutellaris Berg (Hemiptera: Delphacidae), can reduce coverage significantly.     

Alginate embedding and subsequent sporulation of in vitro-produced Conidiobolus thromboides hyphae using a pressurised air-extrusion method

Conidiobolus thromboides is an entomophthoralean fungus with potential as a biological control agent of aphids. However, its application in biological control is limited due to its formulation requirements. The objective of this study was to develop and optimise a novel air-extrusion method to embed C. thromboides hyphae at high density in alginate pellets. An orthogonal experimental design was used to investigate selected combinations of parameters known to affect hyphal density within pellets. The diameter of pellets produced, and the calculated density of hyphae within them, ranged from 0.18 ± 0.09 to 3.17 ± 0.06 mm and from 0.02 to 350.56 mg/mm³ respectively. These data were used to predict the optimal parameter combination to deliver the greatest density of hyphae of C. thromboides per pellet: 1% sodium alginate, a 1:2 ratio of hyphae to sodium alginate, an orifice diameter of 0.232 mm and an air pressure of 0.05 MPa. Pellets made under the optimal conditions predicted produced a mean total of 4.3 ± 0.6 × 10⁵ conidia per pellet at 100% relative humidity which was significantly greater than the mean total number of conidia produced from infected aphid cadavers of comparable size (9.35 ± 0.85 × 10⁴) (p < 0.001). In conclusion, air-extrusion embedding appears to be a promising method for formulating in vitro-produced hyphae of C. thromboides for use in biological control.     

pathmatrix: a geographical information system tool to compute effective distances among samples

pathmatrix is a tool used to compute matrices of effective geographical distances among samples using a least‐cost path algorithm. This program is dedicated to the study of the role of the environment on the spatial genetic structure of populations. Punctual locations (e.g. individuals) or zones encompassing sample data points (e.g. demes) are used in conjunction with a species‐specific friction map representing the cost of movement through the landscape. Matrices of effective distances can then be exported to population genetic software to test, for example, for isolation by distance. pathmatrix is an extension to the geographical information system (GIS) software arcview 3.x.