High-throughput evaluation of pulmonary surfactant adsorption and surface film formation

The assessment of new therapeutic strategies to cure surfactant-associated lung disorders would greatly benefit from assay systems allowing routine evaluations of surfactant functions. We present a method to measure surfactant adsorption kinetics into interfacial air-liquid interfaces based on fluorescence microplate readers. The principle of measurement is simple, robust, and reproducible: Wells of a microtiter plate contain an aqueous solution of a light-absorbing agent. Fluorescence is excited and collected from the top of the wells so that fluorescently labeled surfactant injected into the bulk can be detected only once adsorbed into the air-liquid interface. Mass transfer from the bulk to the interface is achieved by orbital shaking implemented in the plate reader instrument. The method has been tested and validated by using phospholipids or surfactants of different origins, by using albumin as surfactant inhibitor, and by comparison of results with Wilhelmy balance measurements. The method is suited for implementation in high-throughput screening routines for conditions affecting, or improving, surfactant film formation. In contrast to surface tension measurements, our method gives a direct readout of the amount of surfactant adsorbing into the interface, including the functionally important amount of material firmly associating with the interfacial film.     

Structural analysis of the envelope gp120 V3 loop for some HIV-1 variants circulating in the countries of Eastern Europe

The V3 loop on gp120 from human immunodeficiency virus type 1 (HIV-1) is a focus of many research groups involved in anti-AIDS drug development because this region of the protein is a principal target for neutralizing antibodies and a major determinant for cell tropism and syncytium formation. In this study, the nucleotide sequences of the env gene region coding the V3 loop were determined by DNA sequencing methods for four novel HIV-1 strains that circulate in the countries of Eastern Europe, such as Russia, Belarus, Ukraine, etc. Based on the empirical data obtained, the 3D structures of the V3 loops associated with these viral modifications were generated by computer modeling and then compared to discover similarities in the spatial arrangement of this functionally important site of gp120. Despite the HIV-1 genetic variety, several regions of the V3 loop that contain residues critical for cell tropism were shown to be structurally invariant, which may explain its exceptional role in a co-receptor usage. These data together with those on the biological activity of the V3 individual residues clearly show that these conserved structural motifs of gp120 represent potential HIV-1 weak points most suitable for therapeutic intervention.     

Polymer optoelectronic structures for retinal prosthesis

This commentary highlights the effectiveness of optoelectronic properties of polymer semiconductors based on recent results emerging from our laboratory, where these materials are explored as artificial receptors for interfacing with the visual systems. Organic semiconductors based polymer layers in contact with physiological media exhibit interesting photophysical features, which mimic certain natural photoreceptors, including those in the retina. The availability of such optoelectronic materials opens up a gateway to utilize these structures as neuronal interfaces for stimulating retinal ganglion cells. In a recently reported work entitled “A polymer optoelectronic interface provides visual cues to a blind retina,” we utilized a specific configuration of a polymer semiconductor device structure to elicit neuronal activity in a blind retina upon photoexcitation. The elicited neuronal signals were found to have several features that followed the optoelectronic response of the polymer film. More importantly, the polymer-induced retinal response resembled the natural response of the retina to photoexcitation. These observations open up a promising material alternative for artificial retina applications.     

Computational tool for the early screening of monoclonal antibodies for their viscosities

Highly concentrated antibody solutions often exhibit high viscosities, which present a number of challenges for antibody-drug development, manufacturing and administration. The antibody sequence is a key determinant for high viscosity of highly concentrated solutions; therefore, a sequence- or structure-based tool that can identify highly viscous antibodies from their sequence would be effective in ensuring that only antibodies with low viscosity progress to the development phase. Here, we present a spatial charge map (SCM) tool that can accurately identify highly viscous antibodies from their sequence alone (using homology modeling to determine the 3-dimensional structures). The SCM tool has been extensively validated at 3 different organizations, and has proved successful in correctly identifying highly viscous antibodies. As a quantitative tool, SCM is amenable to high-throughput automated analysis, and can be effectively implemented during the antibody screening or engineering phase for the selection of low-viscosity antibodies.     

Temperature‐compensated cell production rate and elongation zone length in the root of Arabidopsis thaliana

To understand how root growth responds to temperature, we used kinematic analysis to quantify division and expansion parameters in the root of Arabidopsis thaliana. Plants were grown at temperatures from 15 to 30 °C, given continuously from germination. Over these temperatures, root length varies more than threefold in the wild type but by only twofold in a double mutant for phytochrome‐interacting factor 4 and 5. For kinematics, the spatial profile of velocity was obtained with new software, Stripflow. We find that 30 °C truncates the elongation zone and curtails cell production, responses that probably reflect the elicitation of a common pathway for handling severe stresses. Curiously, rates of cell division at all temperatures are closely correlated with rates of radial expansion. Between 15 to 25 °C, root growth rate, maximal elemental elongation rate, and final cell length scale positively with temperature whereas the length of the meristem scales negatively. Non‐linear temperature scaling characterizes meristem cell number, time to transit through either meristem or elongation zone, and average cell division rate. Surprisingly, the length of the elongation zone and the total rate of cell production are temperature invariant, constancies that have implications for our understanding of how the underlying cellular processes are integrated.     

The effect of excitation on the rate of respiration in the liverwort Conocephalum conicum

Simultaneous measurements were taken of the electrical activity and the rate of respiration of thalli of Conocephalum conicum L. stimulated electrically and mechanically (by cutting). The measurements of the rate of respiration employed a modified Warburg apparatus for O₂ consumption and an infra-red gas analyzer with computer recording and data processing for CO₂ evolution. The action potential, produced by either a cut (a damaging stimulus) or an electrical stimulus (a non-damaging stimulus), caused a transient rise in the rate of respiration. The course of changes in the rate of respiration depends on the character of the excitation and the area of the thallus covered by it. If stimulation does not produce excitation, the increase in the rate of respiration does not take place, regardless of the magnitude and type of the stimulus applied.     

Computer vision-assisted photogrammetry and one-image 3D modeling in marine mammals

Image processing using traditional photogrammetric methods is a labor-intensive process. The collection of photogrammetry images during aerial surveys is expanding rapidly, creating new challenges to analyze images promptly and efficiently, while reducing human error during processing. Computer vision-assisted photogrammetry, a field of artificial intelligence (AI), can automate image processing, greatly enhancing the efficiency of photogrammetry. Here, we present a practical and efficient program capable of automatically extracting the fine-scale photogrammetry of East Asian finless porpoises (Neophocaena asiaeorientalis sunameri). Our results indicated that computer vision-assisted photogrammetry could achieve the same accuracy as traditional photogrammetry, and the results of the comparisons were validated against the direct measurements. Three-dimensional (3D) models using computer vision-assisted photogrammetric morphometrics generated trustworthy body volume estimates. We also explored the one image-based 3D modeling technique, which is less accurate, but still useful when only one image of the animal is available. Although several limitations exist in the current program, improvements could be made to narrow the virtual-reality gap when more images are available for machine learning and training. We recommend this program for analyzing images of marine mammals possessing a similar morphological contour.     

Redesigning the stereospecificity of tyrosyl‐tRNA synthetase

d ‐Amino acids are largely excluded from protein synthesis, yet they are of great interest in biotechnology. Unnatural amino acids have been introduced into proteins using engineered aminoacyl‐tRNA synthetases (aaRSs), and this strategy might be applicable to d ‐amino acids. Several aaRSs can aminoacylate their tRNA with a d ‐amino acid; of these, tyrosyl‐tRNA synthetase (TyrRS) has the weakest stereospecificity. We use computational protein design to suggest active site mutations in Escherichia coli TyrRS that could increase its d ‐Tyr binding further, relative to l ‐Tyr. The mutations selected all modify one or more sidechain charges in the Tyr binding pocket. We test their effect by probing the aminoacyl‐adenylation reaction through pyrophosphate exchange experiments. We also perform extensive alchemical free energy simulations to obtain l ‐Tyr/d ‐Tyr binding free energy differences. Agreement with experiment is good, validating the structural models and detailed thermodynamic predictions the simulations provide. The TyrRS stereospecificity proves hard to engineer through charge‐altering mutations in the first and second coordination shells of the Tyr ammonium group. Of six mutants tested, two are active towards d ‐Tyr; one of these has an inverted stereospecificity, with a large preference for d ‐Tyr. However, its activity is low. Evidently, the TyrRS stereospecificity is robust towards charge rearrangements near the ligand. Future design may have to consider more distant and/or electrically neutral target mutations, and possibly design for binding of the transition state, whose structure however can only be modeled. Proteins 2016; 84:240–253. © 2015 Wiley Periodicals, Inc.     

Approximations, idealizations and 'experiments' at the physics-biology interface

This paper, which is based on recent empirical research at the University of Leeds, the University of Edinburgh, and the University of Bristol, presents two difficulties which arise when condensed matter physicists interact with molecular biologists: (1) the former use models which appear to be too coarse-grained, approximate and/or idealized to serve a useful scientific purpose to the latter; and (2) the latter have a rather narrower view of what counts as an experiment, particularly when it comes to computer simulations, than the former. It argues that these findings are related; that computer simulations are considered to be undeserving of experimental status, by molecular biologists, precisely because of the idealizations and approximations that they involve. The complexity of biological systems is a key factor. The paper concludes by critically examining whether the new research programme of 'systems biology' offers a genuine alternative to the modelling strategies used by physicists. It argues that it does not.