Effect of Alkylsilyl Side‐Chain Structure on Photovoltaic Properties of Conjugated Polymer Donors

Side‐chain engineering is an important strategy for optimizing photovoltaic properties of organic photovoltaic materials. In this work, the effect of alkylsilyl side‐chain structure on the photovoltaic properties of medium bandgap conjugated polymer donors is studied by synthesizing four new polymers J70 , J72 , J73 , and J74 on the basis of highly efficient polymer donor J71 by changing alkyl substituents of the alkylsilyl side chains of the polymers. And the photovoltaic properties of the five polymers are studied by fabricating polymer solar cells (PSCs) with the polymers as donor and an n‐type organic semiconductor (n‐OS) m‐ITIC as acceptor. It is found that the shorter and linear alkylsilyl side chain could afford ordered molecular packing, stronger absorption coefficient, higher charge carrier mobility, thus results in higher J_sc and fill factor values in the corresponding PSCs. While the polymers with longer or branched alkyl substituents in the trialkylsilyl group show lower‐lying highest occupied molecular orbital energy levels which leads to higher V_oc of the PSCs. The PSCs based on J70 :m‐ITIC and J71 :m‐ITIC achieve power conversion efficiency (PCE) of 11.62 and 12.05%, respectively, which are among the top values of the PSCs reported in the literatures so far.     

New Insight into Ni‐Rich Layered Structure for Next‐Generation Li Rechargeable Batteries

An increase in the amount of nickel in LiMO₂ (M = Ni, Co, Mn) layered system is actively pursued in lithium‐ion batteries to achieve higher capacity. Nevertheless, fundamental effects of Ni element in the three‐component layered system are not systematically studied. Therefore, to unravel the role of Ni as a major contributor to the structural and electrochemical properties of Ni‐rich materials, Co‐fixed LiNi_0.5+xCo_0.2Mn_0.3–xO₂ (x = 0, 0.1, and 0.2) layered materials are investigated. The results, on the basis of synchrotron‐based characterization techniques, present a decreasing trend of Ni²⁺ content in Li layer with increasing total Ni contents. Moreover, it is discovered that the c_hex.‐lattice parameter of layered system is not in close connection with the interslab thickness related to actual Li ion pathway. The interslab thickness increases with increasing Ni concentration even though the c_hex.‐lattice parameter decreases. Furthermore, the lithium ion pathway is preserved in spite of the fact that the c‐axis is collapsed at highly deintercalated states. Also, a higher Ni content material shows better structural properties such as larger interslab thickness, lower cation disorder, and smoother phase transition, resulting in better electrochemical properties including higher Li diffusivity and lower overpotential when comparing materials with lower Ni content.     

Surface‐Modified Porous Carbon Nitride Composites as Highly Efficient Electrocatalyst for Zn‐Air Batteries

Porous carbon nitride (PCN) composites are fabricated using a top‐down strategy, followed by additions of graphene and CoS_x nanoparticles. This subsequently enhances conductivity and catalytic activity of PCN (abbreviated as CoS_x@PCN/rGO) and is achieved by one‐step sulfuration of PCN/graphene oxides (GO) composite materials. As a result, the as‐prepared CoS_x@PCN/rGO catalysts display excellent activity and stability toward both oxygen evolution and reduction reactions, surpassing electrocatalytic performance shown by state‐of‐the‐art Pt, RuO₂ and other carbon nitrides. Remarkably, the CoS_x@PCN/rGO bifunctional activity allows for applications in zinc‐air batteries, which show better rechargeability than Pt/C. The enhanced catalytic performance of CoS_x@PCN/rGO can primarily be attributed to the highly porous morphology and sufficiently exposed active sites that are favorable for electrocatalytic reactions.     

Doped Copper Phthalocyanine via an Aqueous Solution Process for Normal and Inverted Perovskite Solar Cells

Great efforts toward developing novel and efficient hole‐transporting materials are needed to further improve the device efficiency and enhance the cell stability of perovskite solar cells (PSCs). The poor film conductivity and the low carrier mobility of organic small‐molecule‐based hole‐transporting materials restrict their application in PSCs. This study develops an efficient and stable hole‐transporting material, tetrafluorotetracyanoquinodimethane (F₄‐TCNQ)‐doped copper phthalocyanine‐3,4′,4′′,4′′′‐tetra‐sulfonated acid tetra sodium salt (TS‐CuPc) via a solution process, in planar structure PSCs. The p‐type‐doped TS‐CuPc film demonstrates improved film conductivity and hole mobility owing to the strong electron affinity of F₄‐TCNQ. By the F₄‐TCNQ tailoring, the composite film gives the highest occupied molecular orbital level as high as 5.3 eV, which is beneficial for hole extraction. In addition, the aqueous solution processed TS‐CuPc:F₄‐TCNQ precursor is almost neutral with good stability for avoiding the electrode erosion. As a result, the fabricated PSCs employing TS‐CuPc:F₄‐TCNQ as the hole‐transporting material exhibit a power conversion efficiency of 16.14% in a p–i–n structure and 20.16% in an n–i–p structure, respectively. The developed organic small molecule of TS‐CuPc provides the diversification of hole‐transporting materials in planar PSCs.     

Another Strategy,Detouring Potential Decay by Fast Completion of Cation Mixing

The Li‐rich layer‐structured oxides are regarded one of the most promising candidates of cathode materials for high energy‐density Li‐ion batteries. However, the uninterrupted migration of the transition metal (TM) ions during cycling and the resultant continuous fading of their discharge potentials bring challenges to the battery design and impede their commercial applications. Various efforts have been taken to suppress the migration of the TM ions such as surface modification and elemental substitution, but no success has been achieved to date. Another strategy hereby is proposed to address these issues, in which the TM migration is promoted and the layered material is transformed to a rocksalt in the first few charge/discharge cycles by specially designing a novel Li‐rich layer‐structured Li_1.2Mo_0.6Fe_0.2O₂ on the basis of density functional theory calculations. With such, the continuous falling of the discharge potential is detoured due to enhanced completion of the cation mixing. In‐depth studies such as aberration‐corrected scanning transmission electron microscopy confirm the drastic structural change at the atomic scale, and in situ X‐ray absorption spectroscopy and Mössbauer spectroscopy clarify its charge compensation mechanism. This new strategy provides revelation for the development of the Li‐rich layered oxides with mitigated potential decay and a longer lifespan.     

A Material Perspective of Rechargeable Metallic Lithium Anodes

Rechargeable lithium‐based batteries are long considered as the most promising candidates for application in various electronic devices, electric vehicles, and even electrical grids owing to their ultrahigh energy densities. However, to date, metallic lithium‐based batteries are still far from practical applications due to the low Coulombic efficiency and fast capacity decay of lithium anodes. The poor electrochemical performances of metallic lithium anodes are inherently related to random growth of lithium dendrites and infinite volume charge of lithium anodes. In this review, the failure mechanisms of metallic lithium anodes are summarized and ascribed to the unstable and inhomogeneous solid electrolyte interphase, uneven distributions of electric field, and lithium‐ion flux during the lithium plating processes. Correspondingly, efficient strategies for mitigating these problems, including surficial engineering, electric field, and lithium‐ion flux regulation are discussed from the perspective of anode materials. Finally, an outlook is proposed for the design and fabrication of next‐generation rechargeable metallic lithium anodes that aims to address the intrinsic problems of metallic lithium anodes.     

Charge and Discharge Processes and Sodium Storage in Disodium Pyridine‐2,5‐Dicarboxylate Anode—Insights from Experiments and Theory

A combined experimental and computational study of disodium pyridine‐2,5‐dicarboxylate (Na₂PDC) is presented exploring the possibility of using it as a potential anode for organic sodium‐ion batteries. This electrode material can reversibly insert/release two Na cations per formula unit, resulting in high reversible capacity of 270 mA h g^?1 (236 mA h g^?1 after accounting for the contribution from Super P carbon) with excellent cyclability 225 mA h g^?1, with retention of 83% capacity after 100 cycles, and good rate performance with reversible capacity of 138 mA h g^?1 at a 5 C rate. The performance of disodium pyridine dicarboxylate is therefore found to be superior to that of the related and well investigated disodium terephthalate. The material shows two voltage plateaus at about 0.6 V up to Na₂₊₁PDC and then 0.4 V up to full sodiation, Na₂₊₂PDC. The first plateau is attributed to the coordination of inserted Na to nitrogen atoms with bond formation, i.e., a different mechanism from the terephthalate analog. The subsequent plateau is due to coordination to the carboxylic groups.