Volume-dependent ATP-conductive large-conductance anion channel as a pathway for swelling-induced ATP release

In mouse mammary C127i cells, during whole-cell clamp, osmotic cell swelling activated an anion channel current, when the phloretin-sensitive, volume-activated outwardly rectifying Cl(-) channel was eliminated. This current exhibited time-dependent inactivation at positive and negative voltages greater than around +/-25 mV. The whole-cell current was selective for anions and sensitive to Gd(3)+. In on-cell patches, single-channel events appeared with a lag period of approximately 15 min after a hypotonic challenge. Under isotonic conditions, cell-attached patches were silent, but patch excision led to activation of currents that consisted of multiple large-conductance unitary steps. The current displayed voltage- and time-dependent inactivation similar to that of whole-cell current. Voltage-dependent activation profile was bell-shaped with the maximum open probability at -20 to 0 mV. The channel in inside-out patches had the unitary conductance of approximately 400 pS, a linear current-voltage relationship, and anion selectivity. The outward (but not inward) single-channel conductance was suppressed by extracellular ATP with an IC(50) of 12.3 mM and an electric distance (delta) of 0.47, whereas the inward (but not outward) conductance was inhibited by intracellular ATP with an IC(50) of 12.9 mM and delta of 0.40. Despite the open channel block by ATP, the channel was ATP-conductive with P(ATP)/P(Cl) of 0.09. The single-channel activity was sensitive to Gd(3)+, SITS, and NPPB, but insensitive to phloretin, niflumic acid, and glibenclamide. The same pharmacological pattern was found in swelling-induced ATP release. Thus, it is concluded that the volume- and voltage-dependent ATP-conductive large-conductance anion channel serves as a conductive pathway for the swelling-induced ATP release in C127i cells.     

Characterizing membrane foulants in MBR with addition of polyferric chloride to enhance phosphorus removal

The effect of polymeric ferric chloride (PFC) addition on phosphorus removal and membrane fouling were investigated in an anoxic/oxic submerged membrane bioreactor. The total phosphorus concentration in effluent averaged at 0.26 mg/L with PFC addition of 10-15 mg/L, while the rate of membrane fouling increased 1.6 times over the control MBR (without PFC addition). Three-dimensional excitation-emission matrix fluorescence spectroscopy and Gel Filtration Chromatography analysis indicated that soluble microbial byproduct-like materials and large molecules (M(W)>100 kDa) were one of the main contributors of biofouling. Fourier transform infrared spectrum confirmed that the major components of the cake layer were proteins and polysaccharides materials. Scanning electron microscopy demonstrated that membrane surfaces were covered with compact gel layer formed by organic substances and Energy Dispersive X-ray analysis indicated that ferric metals were the most important inorganic pollutants. Consequently, soluble organic substances and dose of PFC should be controlled to minimize membrane fouling.     

Fibrillogenesis of apomyoglobin facilitated by aggregation sequence of yeast Sup35 in various regions

To examine the effect of aggregation sequence QGGYQQQYNP from yeast Sup35 on fibril formation of sperm whale apomyoglobin (apoMb), we constructed several mutants via substitution. Urea-induced unfolding of apoMb confirms that the substitution of the aggregation sequence does not significantly affect the stability of the mutants compared to wild type (WT) at pH 4.2. Under this condition, however, despite the difference in rate most apoMb mutants form fibrils more readily than WT with distinct morphology. These results suggest that the aggregation sequence facilitates fibril assembly of apoMb at acidic pH in vitro and this facilitation depends on the regions replaced.     

Hydrogen sulfide donor sodium hydrosulfide-improved heat tolerance in maize and involvement of proline

Hydrogen sulfide (H₂S) has long been considered as a phytotoxin, but nowadays as a cell signal molecule involved in growth, development, and the acquisition of stress tolerance in higher plants. In the present study, hydrogen sulfide donor, sodium hydrosulfide (NaHS), pretreatment markedly improved germination percentage of seeds and survival percentage of seedlings of maize under heat stress, and alleviated an increase in electrolyte leakage of roots, a decrease in tissue vitality and an accumulation of malondialdehyde (MDA) in coleoptiles of maize seedlings. In addition, pretreatment of NaHS could improve the activity of Δ¹-pyrroline-5-carboxylate synthetase (P5CS) and lower proline dehydrogenase (ProDH) activity, which in turn induced accumulation of endogenous proline in maize seedlings. Also, application of proline could enhance endogenous proline content, followed by mitigated accumulation of MDA and increased survival percentage of maize seedlings under heat stress. These results suggest that sodium hydrosulfide pretreatment could improve heat tolerance of maize and the acquisition of this heat tolerance may be involved in proline.     

Pharmacological characterization of TMEM16A currents

Recent studies have shown that transmembrane protein 16 A (TMEM16A) is a subunit of calcium-activated chloride channels (CACCs). Pharmacological agents have been used to probe the functional role of CACCs, however their effect on TMEM16A currents has not been systematically investigated. In the present study, we characterized the voltage and concentration-dependent effects of 2 traditional CACC inhibitors (niflumic acid and anthracene-9-carboxcylic acid) and 2 novel CACC / TMEM16A inhibitors (CACC_inhA01 and T16A_inhA01) on TMEM16A currents. The whole cell patch clamp technique was used to record TMEM16A currents from HEK 293 cells that stably expressed human TMEM16A. Niflumic acid, A-9-C, CACC_inhA01 and T16A_inhA01 inhibited TMEM16A currents with IC₅₀ values of 12, 58, 1.7 and 1.5 µM, respectively, however, A-9-C and niflumic acid were less efficacious at negative membrane potentials. A-9-C and niflumic acid reduced the rate of TMEM16A tail current deactivation at negative membrane potentials and A-9-C (1 mM) enhanced peak TMEM16A tail current amplitude. In contrast, the inhibitory effects of CACC_inhA01 and T16A_inhA01 were independent of voltage and they did not prolong the rate of TMEM16A tail current deactivation. The effects of niflumic acid and A-9-C on TMEM16A currents were similar to previous observations on CACCs in vascular smooth muscle, strengthening the hypothesis that they are encoded by TMEM16A. However, CACC_inhA01 and T16A_inhA01 were more potent inhibitors of TMEM16A channels and their effects were not diminished at negative membrane potentials making them attractive candidates to interrogate the functional role of TMEM16A channels in future studies.     

The influence of different flocculants on the physiological activity and fucoxanthin production of Phaeodactylum tricornutum

Phaeodactylum tricornutum is an economically important species of microalgae that is widely used in aquaculture, and it is rich in bioactive substances including eicosapentaenoic acid and fucoxanthin. The major bottleneck for industrialization of this species is harvesting. Flocculation is used to harvest microalgae, thus the selection of flocculants is of great importance. In this study, we compared the flocculation effect of four different chemicals (ferric chloride, aluminum sulphate, polyaluminum chloride, and aluminum potassium sulphate) on P. tricornutum. Microexamination showed that ferric and aluminum salts had similar flocculation effects on the algae. Growth and chlorophyll fluorescence measurements showed that P. tricornutum can be re-cultured after flocculation. Pigment analysis showed that flocculation did not result in degradation of fucoxanthin, which suggests that the four flocculants tested may be useful for industrial applications. The results also showed that ferric chloride was the best flocculant for harvesting P. tricornutum when the target product was fucoxanthin, as it had the least influence on the physiological activity of P. tricornutum and it did not lead to degradation of cell components. In contrast, aluminum is poisonous to the nervous system of animals and humans. In addition, the culture medium can be recycled after flocculation by ferric chloride.     

Generation of novel radiolabeled opiates through site-selective iodination

Tritiated opioid radioligands have proven valuable in exploring opioid binding sites. However, tritium has many limitations. Its low specific activity and limited counting efficiency makes it difficult to examine low abundant, high affinity sites and its disposal is problematic due to the need to use organic scintillants and its relatively long half-life. To overcome these issues, we have synthesized both unlabeled and carrier-free radioiodinated iodobenzoyl derivatives of 6β-naltrexamine (¹²⁵I-BNtxA, 18), 6β-naloxamine (¹²⁵I-BNalA, 19) and 6β-oxymorphamine (¹²⁵I-BOxyA, 20) with specific activities of 2100 Ci/mmol. To optimize the utility of the radioligand, we designed a synthesis in which the radiolabel is incorporated in the last synthetic step, which required the selective iodination of the benzoyl moiety without incorporation into the phenolic A ring. Competition studies demonstrated high affinity of the unlabelled compounds for opioid receptors in transfected cell lines, as did the direct binding of the ¹²⁵I-ligands to the opioid receptors. The radioligand displayed very high sensitivity, enabling a marked reduction in tissue, as well as excellent signal/noise characteristics. These new ¹²⁵I-radioligands should prove valuable in future studies of opioid binding sites.     

Development of a biological mercury removal-recovery system

A mercury removal-recovery system was developed for collection of elemental mercury volatilized by biological mercuric ion reduction. Using the mercury removal-recovery system, removal of mercuric chloride from mercury-containing buffer without nutrients by resting cells of mercury-resistant bacterium, Pseudomonas putida PpY101/pSR134 was tested. Optimum temperature, pH, thiol compounds and cell concentration on removal of mercuric chloride were determined, and 92 to 98% of 40 mg Hg l^–1 was recovered in 24 h. The efficiency of mercuric chloride removal from river water and seawater was as high as that observed when using a buffered solution.     

Protection of photosynthetic O2 evolution against heat inactivation: the role of chloride,pH and coupling status

Heat inactivation of photosynthetic O₂ evolution was studied in isolated thylakoids from spinach (Spinacia oleracea) and mangrove (Avicennia marina) leaves. Different temperatures, salt, pH and uncoupler effects were investigated. From these results and others in the literature it was concluced that chloride loss from the membrane and, more specifically, the oxygen-evolving complex of photosystem II, may be the cause of inhibition of oxygen evolution during heat inactivation.Abbreviations Hepes 4-(2-hydroxyethyl)-1-piperazinethanesulfonic acid - Tris 2-amino-2-(hydroxymethyl)-1,3-propanediol - Tricine N-2-hydroxy-1, 1-bis (hydroxymethyl) ethyl glycine - EDTA ethylenediaminetetraacetic acid - FeCN K-ferricyanide