HPLC with cellulose Tris (3,5‐DimethylPhenylcarbamate) chiral stationary phase: Influence of coating times and coating amount on chiral discrimination

Coating cellulose tris (3,5‐dimethylphenylcarbamate) (CDMPC) on silica gels with large pores have been demonstrated as an efficient way for the preparation of chiral stationary phase (CSP) for high‐performance liquid chromatography (HPLC). During the process, a number of parameters, including the type of coating solvent, amount of coating, and the method for subsequent solvent removing, have been proved to affect the performance of the resultant CSPs. Coating times and the concentration of coating solution, however, also makes a difference to CSPs' performance by changing the arrangement of cellulose derivatives while remaining the coating amount constant, have much less been studied before, and thereby, were systematically investigated in this work. Results showed that CSPs with more coating times exhibited higher chiral recognition and column efficiency, suggesting that resolution was determined by column efficiency herein. Afterwards, we also investigated the effect of coating amount on the performance of CSPs, and it was shown that the ability of enantio‐recognition did not increase all the time as the coating amount; and four of seven racemates achieved best resolution when the coating amount reached to 18.37%. At the end, the reproducibility of CDMPC‐coated CSPs were further confirmed by two methods, ie, reprepared the CSP‐0.15‐3 and reevaluated the effect of coating times.     

Chromatographic approach to study the configurational stability of Ni(II) complexes of amino‐acid Schiff bases possessing stereogenic nitrogen

Herein, we disclose the design of a model Ni(II) complex of glycine Schiff base possessing single‐nitrogen stereogenic center, which was successfully used for high‐performance liquid chromatography (HPLC)‐assisted assessment of its configurational stability. The major finding is that the configurational stability of the Ni(II)‐coordinated nitrogen is profoundly dependent on the reaction conditions used, in particular the solvent, and can range from inconsequential (t_½ less than 5 min) to virtually completely stable (t_½ 90 y). The discovery reported in this study most likely to be of certain theoretical and synthetic value.     

Computational chemical analysis of Ru(II)‐Pheox–catalyzed highly enantioselective intramolecular cyclopropanation reactions

Computational chemical analysis of Ru(II)‐Pheox–catalyzed highly enantioselective intramolecular cyclopropanation reactions was performed using density functional theory (DFT). In this study, cyclopropane ring–fused γ‐lactones, which are 5.8 kcal/mol more stable than the corresponding minor enantiomer, are obtained as the major product. The results of the calculations suggest that the enantioselectivity of the Ru(II)‐Pheox–catalyzed intramolecular cyclopropanation reaction is affected by the energy differences between the starting structures 5l and 5i . The reaction pathway was found to be a stepwise mechanism that proceeds through the formation of a metallacyclobutane intermediate. This is the first example of a computational chemical analysis of enantioselective control in an intramolecular carbene‐transfer reaction using C₁‐symmetric catalysts.     

Chiral separation of aliphatic primary amino alcohols as o‐phthaldialdehyde/mercaptoethanol derivatives on polysaccharide‐based chiral stationary phases

A sensitive chiral high performance liquid chromatography (HPLC) method for the determination of aliphatic primary amino alcohol isomers with o‐phthaldialdehyde/mercaptoethanol precolumn derivatization has been developed and validated. Seven chiral columns were tested in a reversed phase mode. Excellent enantioseparation with the resolution more than 2.0 was achieved on Chiralcel OJ‐3R. The effect of various chromatographic conditions including column temperature, acetonitrile content in the mobile phase, buffer pH, buffer concentration, and buffer type in the mobile phase on the retention and the selectivity was investigated. The final mobile phase consisted of binary mixture of 20mM ammonium formate solution with acetonitrile (75:25; v/v). The analyses were performed at mobile phase flow rate of 1.0 mL/min and the column temperature of 40°C. The fluorescence detection was performed at excitation wavelength of 345 nm and emission wavelength of 450 nm. The developed method was fully validated in terms of linearity, sensitivity, accuracy, precision, intermediate precision, and selectivity according to International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use guidelines using internal normalization procedure. The proposed chiral method was proved to be highly sensitive, simple, and rapid and was successfully applied to the determination of D‐Valinol content in commercially available samples of L‐Valinol.     

Whole‐cell biocatalytic of Bacillus cereus WZZ006 strain to synthesis of indoxacarb intermediate: (S)‐5‐Chloro‐1‐oxo‐2,3‐dihydro‐2‐hydroxy‐1H‐indene‐2‐carboxylic acid methyl ester

In this study, a newly isolated strain screened from the indoxacarb‐rich agricultural soils, Bacillus cereus WZZ006, has a high stereoselectivity to racemic substrate 5‐chloro‐1‐oxo‐2,3‐dihydro‐2‐hydroxy‐1H‐indene‐2‐carboxylic acid methyl ester. (S)‐5‐chloro‐1‐oxo‐2,3‐dihydro‐2‐hydroxy‐1H‐indene‐2‐carboxylic acid methyl ester was obtained by bio‐enzymatic resolution. After the 36‐hour hydrolysis in 50‐mM racemic substrate under the optimized reaction conditions, the e.e._s was up to 93.0% and the conversion was nearly 53.0% with the E being 35.0. Therefore, B cereus WZZ006 performed high‐level ability to produce (S)‐5‐chloro‐1‐oxo‐2,3‐dihydro‐2‐hydroxy‐1H‐indene‐2‐carboxylic acid methyl ester. This study demonstrates a new biocatalytic process route for preparing the indoxacarb chiral intermediates and provides a theoretical basis for the application of new insecticides in agricultural production.     

Improving enantiomeric resolutions by avoiding peak distortion effects in on‐line coupled liquid chromatography to gas chromatography

In this work, we study the effect of different variables affecting elution profile distortion on the enantiomeric resolution eventually achievable when working with on‐line coupled liquid chromatography to gas chromatography (LC‐GC). Specifically, the proposed configuration combines achiral reversed‐phase liquid chromatography (RPLC) and chiral gas chromatography (enantio‐GC), with heptakis‐(2,3,6‐tri‐O‐methyl)‐β‐cyclodextrin as enantioselective stationary phase to analyse target fractions transferred (from LC to GC) via the through oven transfer adsorption desorption (TOTAD) interface. The high degree of orthogonality resulting from the combination of two chromatographic columns having very different separation mechanisms (and also requiring mobile phases in distinct physical states), as well as integration of the sample preparation step in the first dimension of the system, significantly contributed to exploit the performance of the proposed two‐dimensional approach. Occasional adverse effects, which may result in severe peak distortions during LC‐GC analysis and could be explained by flow instabilities due to viscous fingering, are circumvented by using the outstanding capacity of the TOTAD interface for achieving effective elimination of the eluent arriving from the LC preseparation.     

Synthesis,resolution, and chiroptical properties of hemicryptophane cage controlling the chirality of propeller arrangement of a C3 triamide unit

The five‐steps synthesis of a hemicryptophane cage combining a benzene‐1,3,5‐tricarboxamide unit and a cyclotriveratrylene (CTV) moiety is described. Chiral high‐performance liquid chromatography (HPLC) was used to resolve the racemic mixture. The absolute configuration of the isolated enantiomers was assigned by comparison of the experimental electronic circular dichroism (ECD) spectra with the calculated ones. X‐ray molecular structures reveal that the capped benzene‐1,3,5‐tricarboxamide unit adopts a structurally chiral conformation in solid state: the chirality of CTV moiety controls the Λ or Δ orientation of the three amides.     

Enantiomeric impurities in chiral catalysts,auxiliaries, and synthons used in enantioselective syntheses. Part 5

The enantiomeric excess of chiral starting materials is one of the important factors determining the enantiopurity of products in asymmetric synthesis. Fifty‐one commercially available chiral reagents used as building blocks, catalysts, and auxiliaries in various enantioselective syntheses were assayed for their enantiomeric purity. The test results were classified within five impurities level (ie, <0.01%, 0.01%‐0.1%, 0.1%‐1%, 1%‐10%, >10%). Previously from 1998 to 2013, several reports have been published on the enantiomeric composition of more than 300 chiral reagents. This series of papers is necessitated by the fact that new reagents are forthcoming and that the enantiomeric purity of the same reagent can vary from batch to batch and/or from supplier to supplier. This report presents chiral liquid chromatography (LC) and gas chromatography (GC) methods to separate enantiomers of chiral compounds and evaluate their enantiomeric purities. The accurate and efficient LC analysis was done using newly introduced superficially porous particle (SPP 2.7 μm) based chiral stationary phases (TeicoShell, VancoShell, LarihcShell‐P, and NicoShell).     

Separation of ephedrine and pseudoephedrine enantiomers using a polysaccharide‐based chiral column: A normal phase liquid chromatography–high‐resolution mass spectrometry approach

Chiral considerations are found to be very much relevant in various aspects of forensic toxicology and pharmacology. In forensics, it has become increasingly important to identify the chirality of doping agents to avoid legal arguments and challenges to the analytical findings. The scope of this study was to develop an liquid chromatography–mass spectrometry (LCMS) method for the enantiomeric separation of typical illicit drugs such as ephedrines (ie, 1S,2R(+)‐ephedrine and 1R,2S(?)‐ephedrine) and pseudoephedrine (ie, R,R(?)‐pseudoephedrine and S,S(+)‐pseudoephedrine) by using normal phase chiral liquid chromatography–high‐resolution mass spectrometry technique. Results show that the Lux i‐amylose‐1 stationary phase has very broad and balancing‐enantio‐recognition properties towards ephedrine analogues, and this immobilized chiral stationary phase may offer a powerful tool for enantio‐separation of different types of pharmaceuticals in the normal phase mode. The type of mobile phase and organic modifier used appear to have dramatic influences on separation quality. Since the developed method was able to detect and separate the enantiomers at very low levels (in pico grams), this method opens easy access for the unambiguous identification of these illicit drugs and can be used for the routine screening of the biological samples in the antidoping laboratories.     

Application of force field calculations to the prediction of chirally discriminating chromatographic behaviour for β-CDs

β-Cyclodextrin and its derivatives have been utilised to effect chiral separation in HPLC and CZE, both as stationary phases and mobile phase additives. The basis of the method is assumed to depend upon the formation of inclusion complexes of differing stabilities between enantiomeric analytes and the cyclodextrin, resulting in a differential dynamic distribution between chromatographic phases. In this study, force field calculations have been employed to model the inclusion complexes of enantiomeric brompheniramine, ephedrine, pseudoephedrine, ibuprofen, mandelic acid, methylphenobarbitone, and hexobarbitone with β-cyclodextrin. The resulting values for Δ(ΔH), the difference in enthalpy of complex formation between enantiomeric pairs has been compared with literature chromatographic data to explain the ability of the systems to achieve enantiomeric separations. © 1996 Wiley-Liss, Inc.