Isolation of 3-(2-carboxyethyl)thymine following in vitro reaction of β-propiolactone with calf thymus DNA

3-(2-Carboxyethyl)thymine (3-CET) was synthesized from β-propiolactone (BPL) and dThd5′P at pH 9.0–9.5 via the intermediate 3-(2-carboxyethyl)thymidine-5′-monophosphoric acid (3-CEdThd5′P). 3-CEdThd5′P was converted to 3-CET by hydrolysis in 1.5 N HCl at 100°C for 2 h. The structure of 3-CET was assigned on the basis of UV spectra, electron impact (EI) and isobutane chemical ionization mass spectra and the EI mass spectrum of a trimethylsilyl derivative of 3-CET. BPL was reacted in vitro with calf thymus DNA at pH 7.5. 100 A units of BPL-reacted DNA yielded, following perchloric acid hydrolysis and preparative paper chromatography, 3 A units of 3-CET. Reaction of BPL with the phosphodiester thymidylyl-(3′-5′)thymidine gave 3-(2-carboxyethyl)thymidylyl-(3′-5′)-3-(2-carboxyethyl)thymidine (～3%). Phosphotriester formation was not detected.     

Assessment of environmental contamination associated with a mammalian cell transformation assay

Summary To estimate worker exposures to, and environmental contamination from, test chemicals and organic solvents used in an in vitro assay to assess the carcinogenic potential of chemicals, sodium fluorescein, a noncarcinogenic fluorescent material, was dissolved in tissue culture medium used to maintain early passage hamster embryo cells. Personal and environmental samples were taken over a 14-d period. The assay was performed according to standard procedures in a ventilated glove box or laminar flow safety cabinet. Considerably more than 99% of the chemical contamination found was recovered from the interiors of the glove box and hood and from disposable equipment. Contamination outside the containment units (less than 1 μg) resulted from intralaboratory transport of chemicals, treated cultures, and contaminated equipment. We conclude that the standard operating practices and procedures provided adequate safeguards for personnel and the environment. Research sponsored by the National Cancer Institute under Contract N01-CO-75380, with Litton Bionetics, Inc.     

Correction of timing errors in photomultiplier tubes used in phase-modulation fluorometry

The measurement of fluorescence lifetimes is known to be hindered by the wavelenght-dependent and photocathode area-dependent time response of photomultiplier tubes. A simple and direct method is described to minimize the effects in photomultiplier tubes for phase-modulation fluorometry. Reference fluorophores of known lifetime were used in place of the usual scattering reference. The emission wavelenghts of the reference and sample were matched by either filters or a monochromator, and the use of a fluorophore rather than a scatter decreases the differences in spatial distribution of light emanating from the reference and sample. Thus photomultiplier tube artifacts are minimized. Five reference fluorophores were selected on the basis of availability, ease of solution preparation, and constancy of lifetime with temperature and emission wavelenght. These compounds are p-terphenyl, PPO, PPD, POPOP and dimethyl POPOP. These compounds are dissolved in ethanol to give standard solutions that can be used over the temperature range from ?55 to +55°C. Purging with inert gas is not necessary. The measured phase and modulation of the reference solution is used, in conjunction with the known reference, lifetime, to calculate the actual phase and modulation of the exictation beam. The use of standard fluorophores does not require separate experiments to quantify photomultiplier effects, and does not increase the time required for the measurement of fluorescence lifetimes. Examples are presented which demonstrate the elimination of artifactual photomultiplier effects in measurements of the lifetimes of DADH (0.4 ns) and indole solutions quenched by iodide. In addition, the use of these reference solutions increases the accuracy of fluorescence lifetime measurements ranging ranging to 30 ns. We judge this method to provide more reliable lifetime measurements by the phase and modulation method. The test solutions and procedures we describe may be used by other laboratories to evaluate the performance of their phase fluorometers.     

Chemical modification of bacitracin A and the biological activity of modified bacitracins

The single side chain amino group of the D-ornithine residue in bacitracin seems to be important for the antibacterial activity of the molecule, since, acetylation, formylation, carbamylation and deamination of the antibiotic caused 90–92% loss of antibacterial activity. In contrast, nearly 80–91% of the antibacterial activity of the parent antibiotic was retained after the esterification, amide formation and acid-chloride formation of the α—and Y -carboxyl groups of D-asparagine and D-glutamic acid residues of the antibiotic, respectively.     

Precise localization of the origin of replication in a physical map of HeLa cell mitochondrial DNA and isolation of a small fragment that contains it

The precise positions of the origin of replication³ and of the D-loop within the HpaII restriction map of HeLa cell mitochondrial DNA have been investigated. For this purpose, 7 S DNA, which is the heavy-chain initiation sequence, was used as a template for fragment-primed DNA synthesis by Escherichia coli DNA polymerase I. The results indicate clearly that the origin of replication lies in HpaII fragment 8 at about 80 base-pairs from the border with fragment 17, and that the D-loop region extends from this site, through fragment 17, to a position in fragment 10 which is about 365 base-pairs from the border with fragment 17. Sequential digestion of fragment 8 with HaeIII enzyme has allowed the isolation of a subfragment, about 200 base-pairs long, that contains the origin of replication.     

Alcaloides du Strychnos tchibangensis

The structure of a new bisindole alkaloid has been elucidated by chemical correlation and analysis of ¹³C NMR spectra.     

Nucleotide sequence of the Streptococcus faecalis plasmid gene encoding the 3'5"-aminoglycoside phosphotransferase type III

We have cloned in Escherichia coli and sequenced a 1489-bp DNA fragment conferring resistance to kanamycin and originating from the streptococcal plasmid pJH1. The resistance gene was located by analysis of the initiation and termination codons in an open reading frame (ORF) of 792 bp. The deduced gene product, a 3'5'-aminoglycoside phosphotransferase of type III, has an Mr of 29,200. Comparison of its amino acid sequence with those of type I (Oka et al., 1981) and type II (Beck et al., 1982) 3' phosphotransferase, from transposable elements Tn903 and Tn5, respectively, indicated a statistically significant structural relationship between these enzymes from phylogenetically remote bacterial genera. The degree of homology observed indicate that phosphotransferase type III and type I genes have diverged from a common ancestor and that the phosphotransferase type II gene has emerged more recently from the type I evolutionary pathway.     

Relative contributions of biological and chemical reactions to the overall rate of pyrite oxidation at temperatures between 30 degrees C and 70 degrees C

The stoichiometry and kinetics of the spontaneous, chemical reaction between pyrite and ferric iron was studied at 30, 45, and 70 degrees C in shake flasks at pH 1.5 by monitoring the ferrous iron, total iron, elemental sulfur, and sulfate concentration profiles in time. It was found that the sulfur moiety of pyrite was oxidized completely to sulfate. Elemental sulfur was not produced in detectable amounts. The iron moiety of pyrite was released as ferrous iron. All observed initial reaction rates could be fitted into an empirical equation. This equation includes the concentrations of ferric iron and pyrite, and a constant which is dependent on the temperature and the nature of the main anion present. It was observed that ferrous iron formed during the reaction slowed down the oxidation of pyrite by ferric iron. The extent of this effect decreased with increasing temperature. With the aid of the empirical equation, the contribution of the chemical oxidation of pyrite by ferric iron to the overall oxidation in a hypothetical plug-flow reactor, in which biologically mediated oxdidation of pyrite and ferrous iron by oxygen also takes place, can be assessed. At 30, 45, and 70 degrees C, respectively, 2, 8-17, and 43% of the pyrite was oxidized chemically by ferric iron. Therefore, it is expected that only in reactors operating at high temperatures with extremely thermophilic bacteria, will chemical oxidation cause a significant deviation from the apparent first order overall kinetics of biological pyrite oxidation.     

Comparisons of benthic invertebrates between riffles and pools

Benthic species assemblages in upstream and downstream ends of riffles and in pools were investigated seasonally in the first five orders of an alluvial gravel stream with distinct pool and riffle channel form. Riffles comprised < 10% of stream area and were separated by pools with extensive bedrock substrate (ca. 15–85% of total surface area) which was scoured during periodic high flow. Virtually all taxa were more abundant in riffles than in pools, except chironomids which were more equally distributed. Inconsistent results were obtained for upstream-downstream comparisons within riffles. Intermittent headwater reaches (orders 1 & 2) which supported half as many taxa retained this pattern during periods of flow, although riffles at these sites were dry from mid-June to mid-November. Pools which contained more gravel, indicating less disturbance during high flow, had a richer assemblage of benthic species than other pools. Many invertebrates in pools may have been there as a result of drift from their preferred riffle habitats, but the presence of gravel in the pools indicates less intense flow disturbance during floods, provides protection from the mild scouring that does occur during floods, and provides refugia from predators.