高血压前期患者颈动脉血管弹性超声参数与左室舒张功能的关系研究

摘要 目的：研究高血压前期患者颈动脉血管弹性超声参数与左室舒张功能的关系。方法：选取2019年12月-2020年12月因血压异常于河北北方学院附属第一医院接受诊断与治疗的161例患者,根据血压水平分为高血压前期组（82例）与高血压组（79例）;另选取同期于我院体检的80例健康志愿者作为对照组。收集三组临床资料,检测生化指标与血压;通过超声诊断仪中超声射频信号血管内中膜定量分析（QIMT）与动脉僵硬度定量分析（QAS）软件测量颈动脉血管弹性超声参数[颈动脉内中膜厚度（IMT）、顺应性系数（CC）、扩张性系数（DC）、血管弹性指数（α、β）、脉搏波传导速度（PWV）];超声心动图检查左室功能指标[左室射血分数（LVEF）、左室质量指数（LVMI）、舒张早期血流速度峰值（E）/舒张晚期血流速度峰值（A）、等容舒张时间（IVRT）、舒张期减速时间（DT）];采用Pearson相关性法分析颈动脉血管弹性超声参数与心室指标的相关性。结果：三组收缩压与舒张压水平存在统计学意义（P＜0.05）。高血压前期组与高血压组IMT、α、β、PWV高于对照组,DC、CC低于对照组（P＜0.05）,且高血压前期组IMT、α、β、PWV低于高血压组,DC、CC高于高血压组（P＜0.05）。高血压前期与高血压组E/A低于对照组,IVRT、DT高于对照组（P＜0.05）,且高血压前期组E/A高于高血压组,IVRT、DT低于高血压组（P＜0.05）。经Peason相关性分析显示,IMT、α、β、PWV与E/A呈负相关,与IVRT、DT呈正相关（P＜0.05）;DC、CC与E/A呈正相关,与IVRT、DT呈负相关（P＜0.05）。结论：高血压前期患者颈动脉血管弹性功能下降,且伴有左室舒张功能受损,颈动脉血管弹性超声参数与左室舒张功能密切相关。     

Rheological properties of guar gum and hydroxyethyl guar gum in aqueous solution

The rheological properties of aqueous solutions of guar gum (GG) and hydroxyethyl guar gum (HEG) have been investigated. The flow properties of these polysaccharide solutions were studied at the shear rate in the range 1.5–1310s⁻¹ using a Rheotest-2 viscometer. The flow of these polysaccharide solutions was described by equation of state based on Cross model. The basic rheological parameters, like zero shear rate viscosity (η_o), elasticity modulus (G_o) and relaxation time (gl_o) were calculated using simple and established relations. Master viscosity curves indicated that the molecular weight distribution of native guar gum has been changed by hydroxyethylation under specified reaction conditions. The effect of concentration and temperature on η_o and λ_o has been studied, and the relations among these were established by simple equations.     

In-depth Profiling and Quantification of the Lysine Acetylome in Hepatocellular Carcinoma with a Trapped Ion Mobility Mass Spectrometer

Hepatocellular carcinoma (HCC) is the third most common cause of cancer-related death worldwide with limited therapeutic options. Comprehensive investigation of protein posttranslational modifications in HCC is still limited. Lysine acetylation is one of the most common types of posttranslational modification involved in many cellular processes and plays crucial roles in the regulation of cancer. In this study, we analyzed the proteome and K-acetylome in eight pairs of HCC tumors and normal adjacent tissues using a timsTOF Pro instrument. As a result, we identified 9219 K-acetylation sites in 2625 proteins, of which 1003 sites exhibited differential acetylation levels between tumors and normal adjacent tissues. Interestingly, many novel tumor-specific K-acetylation sites were characterized, for example, filamin A (K865), filamin B (K697), and cofilin (K19), suggesting altered activities of these cytoskeleton-modulating molecules, which may contribute to tumor metastasis. In addition, we observed an overall suppression of protein K-acetylation in HCC tumors, especially for enzymes from various metabolic pathways, for example, glycolysis, tricarboxylic acid cycle, and fatty acid metabolism. Moreover, the expression of deacetylase sirtuin 2 (SIRT2) was upregulated in HCC tumors, and its role of deacetylation in HCC cells was further explored by examining the impact of SIRT2 overexpression on the proteome and K-acetylome in Huh7 HCC cells. SIRT2 overexpression reduced K-acetylation of proteins involved in a wide range of cellular processes, including energy metabolism. Furthermore, cellular assays showed that overexpression of SIRT2 in HCC cells inhibited both glycolysis and oxidative phosphorylation. Taken together, our findings provide valuable information to better understand the roles of K-acetylation in HCC and to treat this disease by correcting the aberrant acetylation patterns.     

siRNA binding proteins of microglial cells: PKR is an unanticipated ligand

Small interfering RNA (siRNA), double-stranded RNA (dsRNA) 21-23 nucleotides (nt) long with two nt 3' overhangs, has been shown to mediate powerful sequence-specific gene silence in mammalian cells through RNA interference (RNAi). Due to its high efficiency and high specificity siRNA has been used as a powerful post genomic tool and a potent therapeutic candidate. However, there is still a lot to learn about the mobility of siRNA inside cells and the cellular factors that might interfere with the specificity and activity of siRNA. Microglia are the brain's effector cells of the innate immune system and suitable targets in the development of novel therapeutic strategies. Here, we show the cellular uptake and intracellular distribution of siRNA in murine microglial N9 cells. siRNA was internalized by microglial N9 cells without transfection reagent and mainly localized to the endosomes However, no significant gene silencing effects were observed. Its cellular uptake and cellular distribution pattern were similar with that of a same length single stranded DNA (ssDNA). Further, cellular binding proteins of siRNA were purified and identified by mass spectrometry. Negative control siRNA and siRNA targeted to beta-actin were used in this part of experiment. Most of the siRNA binding proteins for negative control siRNA and siRNA targeted to beta-actin were dsRNA-binding proteins, such as dsRNA-dependent protein kinase R (PKR). Furthermore, both control siRNA and siRNA targeted to beta-actin activated PKR in N9 cells, which suggest that siRNA might cause off-target effects through activation of PKR.     

昆虫血细胞功能、形态及细胞免疫反应研究前沿

细胞免疫反应是昆虫先天免疫系统的重要组成部分,与体液免疫反应共同作用以防御外源物。不同类群的昆虫其血细胞种类不同,空间形态及免疫应答功能也各具特征,但在细胞免疫中大都发挥着吞噬、结节与包囊作用。本文根据国内外的研究,对昆虫血细胞的类型、功能、形态、吞噬过程、细胞表面吞噬受体、以蚜虫为代表的不完全变态昆虫免疫学和影响蚜虫免疫系统的共生体等研究动态进行了综述,以期为害虫防治提供思路和防治策略。     

Does directed technological change get greener: Empirical evidence from Shanghai's industrial green development transformation

The degree of technological change biased to the environmental factor is crucial to industrial sustainable development. Using the stochastic frontier analysis method based on the translog production function and the panel data of 32 industrial sub-sectors in Shanghai over 1994–2011, this paper combines the evolution dynamic of the frontier technological structure with the evolution dynamic of technological change direction to estimate the output elasticities of production factors and the growth rate of green total factor productivity. Also, we investigate and compare the degrees of technological change biased to four production factors, i.e., capital, labor, energy, and carbon emissions. The results show that the industrial green total factor productivity in Shanghai presents an overall upward trend and mainly depends on the technical efficiency change. The improvements of labor productivity, R&D intensity, and energy efficiency can effectively enhance the green technical efficiency, while capital deepening has a mitigation effect on the green technical efficiency. The technological change of Shanghai's industrial production biases to energy use and capital saving, causing a high energy demand of industrial development. Under the dual impacts of economic development and energy-saving and emission-reduction policies, the degree of technological change biased to the environmental factor (carbon emissions) displays strong and weak alternations, indicating that the green bias of industrial technological change in Shanghai is not stable and that the green transformation of industrial development model needs to be further advanced.     

Distribution of a centrosomal antigen during morphogenesis in the ciliated protozoan Euplotes

Ciliates assemble basal bodies in great number at many stages of the life-cycle. In order to understand their assembly mechanisms, we screened a library of monoclonal antibodies directed against pericentriolar material. One of these antibodies, CTR210, was used previously to follow steps of this assembly process: in Paraurostyla, new basal bodies appear along a scaffold of linear structures recognized by this antibody. The very unusual behavior of this antigen deserved confirmation in other species. In the present study, we show by immunofluorescence that, in another phylogenetically very distant species, Euplotes, basal bodies are assembled in the same pathway during division. In addition, this antibody recognizes a filamentous ring located at the division furrow and linking many basal body assemblages. By cell fractionation and cytoskeletal extraction, we obtained fractions enriched in basal bodies and associated material. Such fractions still display a high complexity in protein composition. These fractions were used to characterize the main target of the antibody as a doublet of 45 kDa. These results confirm previous results in terms of functionality of the protein recognized by the antibody, but raise new questions in terms of the assignment of the recognized protein to the HSP70 family as hypothesized previously.     

Evaluating long-term cellular effects of the arsenic species thio-DMAV: qPCR-based gene expression as screening tool

Thio-dimethylarsinic acid (thio-DMA^V) is a human urinary metabolite of the class 1 human carcinogen inorganic arsenic as well as of arsenosugars. Thio-DMA^V exerts strong cellular toxicity, whereas its toxic modes of action are not fully understood. For the first time, this study characterises the impact of a long-term (21 days) in vitro incubation of thio-DMA^V on the expression of selected genes related to cell death, stress response, epigenetics and DNA repair. The observed upregulation of DNMT1 might be a cellular compensation to counterregulate the in a very recent study observed massive global DNA hypomethylation after chronic thio-DMA^V incubation. Moreover, our data suggest that chronic exposure towards subcytotoxic, pico- to nanomolar concentrations of thio-DMA^V causes a stress response in human urothelial cells. The upregulation of genes encoding for proteins of DNA repair (Apex1, Lig1, XRCC1, DDB2, XPG, ATR) as well as damage response (GADD45A, GADD45G, Trp53) indicate a potential genotoxic risk emanating from thio-DMA^V after long-term incubation.     

Entropic elastic processes in protein mechanisms. II. Simple (passive) and coupled (active) development of elastic forces

The first part of this review on entropic elastic processes in protein mechanisms (Urry, 1988) demonstrated with the polypentapeptide of elastin (Val¹-Pro²-Gly³-Val⁴-Gly⁵)_n that elastic structure develops as the result of an inverse temperature transition and that entropic elasticity is due to internal chain dynamics in a regular nonrandom structure. This demonstration is contrary to the pervasive perspective of entropic protein elasticity of the past three decades wherein a network of random chains has been considered the necessary structural consequence of the occurrence of dominantly entropic elastomeric force. That this is not the case provides a new opportunity for understanding the occurrence and role of entropic elastic processes in protein mechanisms. Entropic elastic processes are considered in two classes: passive and active. The development of elastomeric force on deformation is class I (passive) and the development of elastomeric force as the result of a chemical process shifting the temperature of a transition is class II (active). Examples of class I are elastin, the elastic filament of muscle, elastic force changes in enzyme catalysis resulting from binding processes and resulting in the straining of a scissile bond, and in the turning on and off of channels due to changes in transmembrane potential. Demonstration of the consequences of elastomeric force developing as the result of an inverse temperature transition are seen in elastin, where elastic recoil is lost on oxidation, i.e., on decreasing the hydrophobicity of the chain and shifting the temperature for the development of elastomeric force to temperatures greater than physiological. This is relevant in general to loss of elasticity on aging and more specifically to the development of pulmonary emphysema. Since random chain networks are not the products of inverse temperature transitions and the temperature at which an inverse temperature transition occurs depends on the hydrophobicity of the polypeptide chain, it now becomes possible to consider chemical processes for turning elastomeric force on and off by reversibly changing the hydrophobicity of the polypeptide chain. This is herein called mechanochemical coupling of the first kind; this is the chemical modulation of the temperature for the transition from a less-ordered less elastic state to a more-ordered more elastic state. In the usual considerations to date, development of elastomeric force is the result of a standard transition from a more-ordered less elastic state to a less-ordered more elastic state. When this is chemically modulated, it is herein called mechanochemical coupling of the second kind. For elastin and the polypentapeptide of elastin, since entropic elastomeric force results on formation of a regular nonrandom structure and thermal randomization of chains results in loss of elastic modulus to levels of limited use in protein mechanisms, consideration of regular spiral-like structures rather than ramdom chain networks or random coils are proposed for mechanochemical coupling of the second kind. Chemical processes to effect mechanochemical coupling in biological systems are most obviously phosphorylation-dephosphorylation and changes in calcium ion activity but also changes in pH. These issues are considered in the events attending parturition in muscle contraction and in cell motility.     

Validation of density–elasticity relationships for finite element modeling of human pelvic bone by modal analysis

In total hip arthroplasty and particularly in revision surgery, computer assisted pre-operative prediction of the best possible anchorage strategy for implant fixation would be a great help to the surgeon. Computer simulation relies on validated numerical models. In the current study, three density–elasticity relationships (No. 1–3) from the literature for inhomogeneous material parameter assignment from CT data in automated finite element (FE) modeling of long bones were evaluated for their suitability for FE modeling of human pelvic bone. Numerical modal analysis was conducted on 10 FE models of hemipelvic bone specimens and compared to the gold standard provided by experimental modal analysis results from a previous in-vitro study on the same specimens. Overall, calculated resonance frequencies came out lower than measured values. Magnitude of mean relative deviation of numerical resonance frequencies with regard to measured values is lowest for the density–elasticity relationship No. 3 (−15.9%) and considerably higher for both density–elasticity relationships No. 1 (−41.1%) and No. 2 (−45.0%). Mean MAC values over all specimens amount to 77.8% (No. 1), 78.5% (No. 2), and 83.0% (No. 3). MAC results show, that mode shapes are only slightly influenced by material distribution. Calculated resonance frequencies are generally lower than measured values, which indicates, that numerical models lack stiffness. Even when using the best suited (No. 3) out of three investigated density–elasticity relationships, in FE modeling of pelvic bone a considerable underestimation of model stiffness has to be taken into account.