A plasma global metabolic profiling approach applied to an exercise study monitoring the effects of glucose, galactose and fructose drinks during post-exercise recovery

A global metabolic profiling methodology based on gas chromatography coupled to time-of-flight mass spectrometry (GC-TOFMS) for human plasma was applied to a human exercise study focused on the effects of beverages containing glucose, galactose, or fructose taken after exercise and throughout a recovery period of 6 h and 45 min. One group of 10 well trained male cyclists performed 3 experimental sessions on separate days (randomized, single center). After performing a standardized depletion protocol on a bicycle, subjects consumed one of three different beverages: maltodextrin (MD)+glucose (2:1 ratio), MD+galactose (2:1), and MD+fructose (2:1), consumed at an average of ～1.25 g of carbohydrate (CHO) ingested per minute. Blood was taken straight after exercise and every 45 min within the recovery phase. With the resulting blood plasma, insulin, free fatty acid (FFA) profile, glucose, and GC-TOFMS global metabolic profiling measurements were performed. The resulting profiling data was able to match the results obtained from the other clinical measurements with the addition of being able to follow many different metabolites throughout the recovery period. The data quality was assessed, with all the labelled internal standards yielding values of <15% CV for all samples (n=335), apart from the labelled sucrose which gave a value of 15.19%. Differences between recovery treatments including the appearance of galactonic acid from the galactose based beverage were also highlighted.     

Effects of data characteristics on the results of reserve selection algorithms

We tested the effects of four data characteristics on the results of reserve selection algorithms. The data characteristics were nestedness of features (land types in this case), rarity of features, size variation of sites (potential reserves) and size of data sets (numbers of sites and features). We manipulated data sets to produce three levels, with replication, of each of these data characteristics while holding the other three characteristics constant. We then used an optimizing algorithm and three heuristic algorithms to select sites to solve several reservation problems. We measured efficiency as the number or total area of selected sites, indicating the relative cost of a reserve system. Higher nestedness increased the efficiency of all algorithms (reduced the total cost of new reserves). Higher rarity reduced the efficiency of all algorithms (increased the total cost of new reserves). More variation in site size increased the efficiency of all algorithms expressed in terms of total area of selected sites. We measured the suboptimality of heuristic algorithms as the percentage increase of their results over optimal (minimum possible) results. Suboptimality is a measure of the reliability of heuristics as indicative costing analyses. Higher rarity reduced the suboptimality of heuristics (increased their reliability) and there is some evidence that more size variation did the same for the total area of selected sites. We discuss the implications of these results for the use of reserve selection algorithms as indicative and real-world planning tools.     

The starch‐binding domain family CBM41—An in silico analysis of evolutionary relationships

Within the CAZy database, there are 81 carbohydrate‐binding module (CBM) families. A CBM represents a non‐catalytic domain in a modular arrangement of glycoside hydrolases (GHs). The present in silico study has been focused on starch‐binding domains from the family CBM41 that are usually part of pullulanases from the α‐amylase family GH13. Currently there are more than 1,600 sequences classified in the family CBM41, almost exclusively from Bacteria, and so a study was undertaken in an effort to divide the members into relevant groups (subfamilies) and also to contribute to the evolutionary picture of family CBM41. The CBM41 members adopt a β‐sandwich fold (～100 residues) with one carbohydrate‐binding site formed by the side‐chains of three aromatic residues that interact with carbohydrate. The family CBM41 can be divided into two basic subdivisions, distinguished from each other by a characteristic sequence pattern or motif of the three essential aromatics as follows: (i) “W‐W‐～10aa‐W” (the so‐called Streptococcus/Klebsiella‐type); and (ii) “W‐W‐～30aa‐W” (Thermotoga‐type). Based on our bioinformatics analysis it is clear that the first and second positions of the motif can be occupied by aromatic residues (Phe, Tyr, His) other than tryptophan, resulting in the existence of six different carbohydrate‐binding CBM41 groups, that reflect mostly differences in taxonomy, but which should retain the ability to bind an α‐glucan. In addition, three more groups have been proposed that, although lacking the crucial aromatic motif, could possibly employ other residues from remaining parts of their sequence for binding carbohydrate. Proteins 2017; 85:1480–1492. © 2017 Wiley Periodicals, Inc.     

Functionalization of cellulose acetate fibers with engineered cutinases

In the present work, we describe for the first time the specific role of cutinase on surface modification of cellulose acetate fibers. Cutinase exhibits acetyl esterase activity on diacetate and triacetate of 0.010 U and 0.007 U, respectively. An increase on the hydroxyl groups at the fiber surface of 25% for diacetate and 317% for triacetate, after a 24 h treatment, is estimated by an indirect assay. Aiming at further improvement of cutinase affinity toward cellulose acetate, chimeric cutinases are genetically engineered by fusing the 3′‐end coding sequence with a bacterial or a fungal carbohydrate‐binding module and varying the linker DNA sequence. A comparative analysis of these genetic constructions is presented showing that, the superficial regeneration of cellulose hydrophilicity and reactivity on highly substituted cellulose acetates is achieved by chimeric cutinases. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

草鱼胶原凝集素基因的克隆及其功能分析

从草鱼Ctenopharyngodon idella肝肾cDNA文库中克隆得到胶原凝集素基因。草鱼胶原凝集素全长cDNA为1128bp,其中5′非编码区229bp,3′非翻译区104bp,最大开放阅读框为795bp,编码264个氨基酸。系统进化分析表明草鱼胶原凝集素与斑马鱼的亲缘关系最近。根据草鱼胶原凝集素序列特征,克隆了包含糖基识别域(CRD)的cDNA,并进行原核表达、纯化获得其重组蛋白PCRD。进行PCRD与6种细菌的凝集和糖抑制实验,结果表明半乳糖、葡萄糖、甘露糖和麦芽糖4种糖都会使PCRD与嗜水气单胞菌的凝集明显下降甚至极大地干扰凝集;麦芽糖使金黄色葡萄球菌的凝集明显下降,而肽聚糖和甘露糖会使凝集受到抑制;此外,PCRD的凝集反应不依赖Ca2+。     

Energy reserves of parasitoids depend on honeydew from non‐hosts

相似文献   

Nutrient dynamics in a tritrophic system of ants,aphids and beans

The interactions between ants (Lasius niger), aphids (Aphis fabae) and plants (Phaseolus vulgaris) were studied in a laboratory experiment with the following treatments: application of N‐fertilizer for plants, supply of mealworms or sugar solution or their combination as alternative food sources for ants. Three main questions were studied: (1) Do ants reduce tending to honeydew‐producing aphids when an alternative sugar or protein resource was available? (2) Is aphid predation/protein consumption by ants higher when additional carbon is offered to maintain the carbon/protein balance? (3) Does fertilizer treatment propagate in the food web? For the experimental analysis stable isotope techniques were applied. δ¹⁵N served as a marker for the pathway from plants to higher trophic levels. Low δ¹⁵N‐value of fertilizer spread from plant shoots to aphids and ants. To trace which sugar‐/protein source was consumed by ants, the different ¹³C/¹²C‐ratios of C₃‐ and C₄‐plants were used with aphids feeding on C₃‐plant material, while mealworm food and sugar solution originated from C₄‐plant material. Fertilizer application had no effect on biomasses of plants, consumers or microflora. Ant biomass was significantly higher when additional sugar solution was offered. Higher contents of ¹³C indicated a high incorporation rate of additional sugar. Additional protein had no effect on colony biomass and no increasing predation on aphids could be observed when carbon was in excess. However, due to the lack of queens and newly produced larvae, protein requirements of experimental colonies were lower than in natural systems. Ants positively affected aphid populations, but reduced tending, whilst having access to an alternative sugar resource. When sugar/protein was offered to ants, the host plant had an increased root/shoot ratio. This indicates that decreasing aboveground activity of ants could lead to reduced plant growth of aphid‐infested plants, presumably due to higher fungal attack on shoots.     

Replacing dietary glucose with fructose increases ChREBP activity and SREBP-1 protein in rat liver nucleus

Diets high in fructose cause hypertriglyceridemia and insulin resistance in part due to simultaneous induction of gluconeogenic and lipogenic genes in liver. We investigated the mechanism underlying the unique pattern of gene induction by dietary fructose. Male Sprague-Dawley rats (n = 6 per group) were meal-fed (4 h/d) either 63% (w/w) glucose or 63% fructose diet. After two weeks, animals were killed at the end of the last meal. Nuclear SREBP-1 was 2.2 times higher in fructose-fed rats than glucose-fed rats. Nuclear FoxO1 was elevated 1.7 times in fructose group, but did not reach significance (P = 0.08). Unexpectedly, no difference was observed in nuclear ChREBP between two groups. However, ChREBP DNA binding was 3.9× higher in fructose-fed animals without an increase in xylulose-5-phospate, a proposed ChREBP activator. In conclusion, the gene induction by dietary fructose is likely to be mediated in part by simultaneously increased ChREBP activity, SREBP-1 and possibly FoxO1 protein in nucleus.     

A biomolecular recognition approach for the functionalization of cellulose with gold nanoparticles

Materials with new and improved functionalities can be obtained by modifying cellulose with gold nanoparticles (AuNPs) via the in situ reduction of a gold precursor or the deposition or covalent immobilization of pre‐synthesized AuNPs. Here, we present an alternative biomolecular recognition approach to functionalize cellulose with biotin‐AuNPs that relies on a complex of 2 recognition elements: a ZZ‐CBM3 fusion that combines a carbohydrate‐binding module (CBM) with the ZZ fragment of the staphylococcal protein A and an anti‐biotin antibody. Paper and cellulose microparticles with AuNPs immobilized via the ZZ‐CBM3:anti‐biotin IgG supramolecular complex displayed an intense red color, whereas essentially no color was detected when AuNPs were deposited over the unmodified materials. Scanning electron microscopy analysis revealed a homogeneous distribution of AuNPs when immobilized via ZZ‐CBM3:anti‐biotin IgG complexes and aggregation of AuNPs when deposited over paper, suggesting that color differences are due to interparticle plasmon coupling effects. The approach could be used to functionalize paper substrates and cellulose nanocrystals with AuNPs. More important, however, is the fact that the occurrence of a biomolecular recognition event between the CBM‐immobilized antibody and its specific, AuNP‐conjugated antigen is signaled by red color. This opens up the way for the development of simple and straightforward paper/cellulose‐based tests where detection of a target analyte can be made by direct use of color signaling.