Characterization of initial events in bacterial surface colonization by two Pseudomonas species using image analysis

The processes leading to bacterial colonization on solidwater interfaces are adsorption, desorption, growth, and erosion. These processes have been measured individually in situ in a flowing system in real time using image analysis. Four different substrata (copper, silicon, 316 stainless-steel and glass) and 2 different bacterial species (Pseudomonas aeruginosa and Pseudomonas fluorescens) were used in the experiments. The flow was laminar (Re = 1.4) and the shear stress was kept constant during all experiments at 0.75 N m(-2). The surface roughness varied among the substrata from 0.002 mum (for silicon) to 0.015 mum (for copper). Surface free energies varied from 25.1 dynes cm(-1) for silicon to 31.2 dynes cm(-1) for copper. Cell curface hydrophobicity, reported as hydrocarbon partitioning values, ranged from 0.67 for Ps. fluorescens to 0.97 for Ps. aeruginosa.The adsorption rate coefficient varried by as much as a factor of 10 among the combinations of bacterial strain and substratum material, and was positively correlated with surface free energy, the surface roughness of the substratum, and the hydrophobicity of the cells. The probability of desorption decreased with increasing surface free energy and surface roughness of the substratum. Cell growth was inhibited on copper, but replication of cells overlying an initial cell layer was observed with increased exposure time to the cell-containing bulk water. A mathematical model describing cell accumulation on a substratum is presented.     

Settlement of the diazotrophic,phytoeffective bacterial strain Pantoea agglomerans on and within winter wheat: An investigation using ELISA and transmission electron microscopy

The aim of this study was to investigate the ability of Pantoea agglomerans, a plant growth-promoting bacterium, to colonize various regions and tissues of the wheat plant (Triticum aestivum L.) by using different inoculation methods and inoculum concentrations. In addition, the enzyme-linked immunosorbent assay (ELISA) and transmission electron microscopy (TEM) were used to determine: (a) the ability of the bacterial cells to grow and survive both on the surface and within internal tissue of the plant and (b) the response of the plant to bacterial infection. After inoculation, cells of the diazotrophic bacterial strain P. agglomerans were found to be located in roots, stems and leaves. Colony development of bacterial cells was only detected within intercellular spaces of the root and on the root surface. However, single bacterial cells were observed in leaves and stems on the surface of the epidermis, in the vicinity to stomatal cells, within intercellular spaces of the mesophyll and within xylem vessels. Inoculated bacterial cells were found to be able to enter host tissues, to multiply in the plant and to maintain a delicate relationship between endophyte and host. The density of bacterial settlement in the plant in all experiments was about 10⁶ to 10⁷ cells per mL root or shoot sap. Establishment was confirmed by a low coefficient of variation of ELISA means at these concentrations.     

Testing of different antibiotics against Gram-positive and Gram-negative bacteria isolated from plant tissue culture

Different Gram-positive and Gram-negative bacteria (Staphylococcus xylosus, S. aureus, S. cohnii, Bacillus sp., Corynebacterium sp., Pseudomonas vesicularis) were isolated from homogenized shoot tips of Drosera rotundifolia, Spatiphyllum sp., Syngonium cv. White butterfly, Nephrolepis exaltata cv. Teddy Junior. Growth inhibition of selected bacterial strains was examined using 28 different single antibiotics and 7 antibiotic mixtures. It was found that with the two mixtures Imipenem/Ampicillin and Imipenem/Penicillin G at concentrations of 5 mg l^–1 each, bacterial growth inhibition was most effective. Because of the lack of toxic effects on in vitro plants of 7 species it was proposed that these antibiotic mixtures can be applied advantageously to inhibit bacterial growth in tissue culture.     

Measurement of bacterial random motility and chemotaxis coefficients: I. Stopped-flow diffusion chamber assay

Bacterial chemotaxis, the directed movement of a cell population in response to a chemical gradient, plays a critical role in the distribution and dynamic interaction of bacterial populations in nonmixed systems. Therefore, in order to make reliable predictions about the migratory behavior of bacteria within the environment, a quantitative characterization of the chemotactic response in terms of intrinsic cell properties is needed.The design of the stopped-flow diffusion chamber (SFDC) provides a well-characterized chemical gradient and reliable method for measuring bacterial migration behavior. During flow through the chamber, a step change in chemical concentration is imposed on a uniform suspension of bacteria. Once flow is stopped, diffusion causes a transient chemical gradient to develop, and bacteria respond by forming a band of high cell density which travels toward higher concentrations of the attractant. Changes in bacterial spatial distributions observed through light scattering are recorded on photomicrographs during a 10-min period. Computer-aided image analysis converts absorbance of the photographic negatives to a digital representation of bacterial density profiles. A mathematical model (part II) is used to quantitatively characterize these observations in terms of intrinsic cell parameters: a chemotactic sensitivity coefficient, mu(0), from the aggregate cell density accumulated in the band and a random motility coefficient, mu, from population dispersion in the absence of a chemical gradient.Using the SFDC assay and an individual-cell-based mathematical model, we successfully determined values for both of these population parameters for Escherichia coli K12 responding to fucose. The values obtained were mu = 1.1 +/- 0. 4 x 10(-5) cm(2)/s and chi(o) = 8 +/- 3 +/- 10(-5) cm(2)/s. We have demonstrated a method capable of determining these parameter values from the now validated mathematical model which will be useful for predicting bacterial migration in application systems.     

Advantages of distinguishing the active fraction in bacterioplankton assemblages: some examples

The difficulty of distinguishing between active and dormant or dead bacterial cells is an important problem for the aquatic microbiologist.Active cells can be detected under the microscope by the presence of an intact electron transport system able to reduce the colourless INT [2-(p-iodophenyl)-3-(p-nitrophenyl)-5-phenyl tetrazolium chloride] to an optically dense intracellular deposit.An improvement of this method has been applied to Lake Geneva and to a fish pond in the Ivory Coast. The portion of INT-reducing bacterial cells ranged from 1 to 71%, depending on place, depth, season and time of the day. In all cases bacterial activity, determined by uptake of ³H Thymidine or ¹⁴C glucose, and frequency of dividing cells were better correlated with the number of INT-reducing cells than with the total number of cells. This means that counts of cells able to reduce INT have a better metabolic significance than total cell counts. Some examples are developed which show the advantages of applying this method in cases where it is useful to distinguish active cells in a bacterial assemblage.     

Bottom-up effects of bream (Abramis brama L.) in Lake Balaton

Enclosures (17 m³) were used in the mesotrophic area of Lake Balaton to determine the impact of benthivorous bream (Abramis brama L.) on the lower trophic levels during summers of 1984–86. In enclosures with a fish biomass similar to the biomass in the eutrophic area of the lake, the number of phytoplankton species was highest. In enclosures with a low fish biomass the phytoplankton was dominated by the greens. A high biomass of bream in the mesotrophic basin caused bacterial production corresponding to that of the eutrophic part of the lake. Crustaceans were dominated by copepods and were unable to control phytoplankton peaks. Bottom-up effects of bream were more obvious than top-down effects and seem to be more important in the possible control of water quality.     

Substructural morphogenesis of the spindle apparatus in meiotic basidia ofCoprinus micaceus (Agaricales)

The spindle apparatus ofCoprinus micaceus begins to develop from the diglobular polar body outside the nucleus. During both meiotic divisions it operates inside the nuclear envelope and consists of two amorphous poles, a central bundle of interpolar microtubules, and chromosomal microtubules. A metaphase plate cannot exist because the interpolar strand of fibers is persistent throughout the division process. Within the spindle axis more than 100 microtubules can be estimated. They are encircled by a ring of chromatic structures. During the telophase the former spindle pole is evaginated from the nuclear envelope and contacts the plasmalemma near the cell wall.     

Preferential feeding behaviour of Daphnia magna

Preferential feeding behaviour by Daphnia magna was shown when Daphnia were fed on a mixture of ¹⁴C-labelled algae (Chlorella vulgaris or Scenedesmus quadricauda) and ³H-labelled bacteria (Escherichia coli). Daphnia consumption of bacteria was equal or higher in the presence of algae. On the other hand, in the presence of bacteria, algal consumption decreased by 40–70% compared to algal consumption in the absence of bacteria. ¹⁴C radioactive uptake was in good agreement with the chlorophyll content and demonstrates the preferential feeding behaviour of Daphnia.     

Nematode Temperature Responses: a Niche Dimension In Populations of Bacterial-Feeding Nematodes

The optimum temperatures for population development were determined for six species of bacterial-feeding nematodes from among eight temperatures, ranging from 5 to 40 C. Four of the species are cohabiting species. The range of temperatures over which population development occurs (temperature niche breadth) is different for the cohabiting species. This difference may be a means of reducing competition between species, thus increasing temperatures over which habitats can be exploited.     

FREEZE-FRACTURED CHLOROPLAST MEMBRANES OF GONYAULAX POLYEDRA (PYRROPHYTA)1

The chloroplast membranes of Gonyaulax polyedra Stein were studied in replicas of rapidly frozen and fractured cells. The thylakoid EF_s face lacked the large 15–16 nm particles characteristic of plants with the light-harvesting chlorophyll a/b protein, presumably because the principal light-harvesting protein of Gonyaulax is the small water-soluble peridinin-chlorophyll-protein and the chlorophyll a/b protein is absent. As in other plants, the EF_s thylakoid fracture face carried more particles (4 ×) than EF_uface. The PF faces of the thylakoid showed twice as many particles as did the EF_s faces. No circadian differences in the number or size of thylakoid membrane particles could be detected. Three membranes comprise the chloroplast envelope in Gonyaulax. They could be clearly differentiated in freeze-fractured cells. The middle envelope membrane carried many fewer particles on both the EF and PF faces than did the other two envelope membranes. The PF faces of both the outer and inner envelope membranes showed more particles than the EF faces, as do many other membranes which have been examined.