灌溉施肥部位对玉米同化物分配和水分利用的影响

用土柱管栽试验方法研究了不同灌溉施肥深度对夏玉米生长发育、地上地下部分同化物分配、产量和水分利用效率的影响。试验结果表明：土表下灌施抑制了玉米生育早期的地上部分生长,使根系向土壤中下层的分布加强,从而保证了作物中后期对水分养分的吸收利用,提高了水分利用效率。在本试验条件下,玉米生长的最佳灌施深度为30cm。     

Are rare species useful species? Obstacles to the conservation of tree diversity in the dry forest zone agro‐ecosystems of Mesoamerica

Aim To test the potential to conserve rare dry forest tree and shrub species circa situm. Location Oaxaca, Mexico and Southern Honduras. Methods Local uses (timber, posts and firewood) of species were determined principally through semistructured interviews with 20 rural householders in each of four communities in Honduras and four in Oaxaca. Tree and shrub diversity inventories were carried out in a total of 227 forest patches and parcels of farmland in those eight communities. Species’ conservation priorities were determined using the star system of Hawthorne (1996) and IUCN listings. Results Despite a large number of useful species, remarkably few were also conservation priorities. Useful species were found to be substitutable as is illustrated by Bombacopsis quinata, Cordia alliodora, Guaiacum sanctum and G. coulteri. Conclusions In these areas, circa situm conservation is inhibited by the lack of species that are both rare and useful. Usefulness must be interpreted as a function of substitutability. Natural regeneration provides an abundance of diversity, farmers are unlikely to invest in the management of a species when suitable substitutes are freely available. The key to conserving rare species may be in maintaining or enhancing the value of the landscape elements in which they are found.     

Long term repeated prescribed burning increases evenness in the basidiomycete laccase gene pool in forest soils

Repeated prescribed burning alters the biologically labile fraction of nutrients and carbon of soil organic matter (SOM). Using a long-term (30 years) repeated burning experiment where burning has been carried out at a 2- or 4-year frequency, we analysed the effect of prescribed burning on gross potential C turnover rates and phenol oxidase activity in relation to shifts in SOM composition as observed using Fourier-transform infrared spectroscopy. In tandem, we assessed the genetic diversity of basidiomycete laccases. While the overall effect of burning was a decline in phenol oxidase activity, Shannon diversity and evenness of laccases was significantly higher in burned sites. Co-correspondence analysis of SOM composition and laccase operational taxonomic unit frequency data also suggested a strong correlation. While this correlation could indicate that the observed increase in laccase genetic diversity due to burning is due to increased resource diversity, a temporal replacement of the most abundant members of the assembly by an otherwise dormant pool of fungi cannot be excluded. As such, our results fit the intermediate disturbance hypothesis. Effects were stronger in plots burned in 2-year rotations, suggesting that the 4-year burn frequency may be a more sustainable practice to ensure the long-term stability of C cycling in such ecosystems.     

Life cycle assessment of Australian automotive door skins

Background, aim, and scope  Policy initiatives, such as the EU End of Life Vehicle (ELV) Directive for only 5% landfilling by 2015, are increasing the pressure for higher material recyclability rates. This is stimulating research into material alternatives and end-of-life strategies for automotive components. This study presents a Life Cycle Assessment (LCA) on an Australian automotive component, namely an exterior door skin. The functional unit for this study is one door skin set (4 exterior skins). The material alternatives are steel, which is currently used by Australian manufacturers, aluminium and glass-fiber reinforced polypropylene composite. Only the inputs and outputs relative to the door skin production, use and end-of-life phases were considered within the system boundary. Landfill, energy recovery and mechanical recycling were the end-of-life phases considered. The aim of the study is to highlight the most environmentally attractive material and end-of-life option. Methods  The LCA was performed according to the ISO 14040 standard series. All information considered in this study (use of fossil and non fossil based energy resources, water, chemicals etc.) were taken up in in-depth data. The data for the production, use and end-of-life phases of the door skin set was based upon softwares such as SimaPro and GEMIS which helped in the development of the inventory for the different end-of-life scenarios. In other cases, the inventory was developed using derivations obtained from published journals. Some data was obtained from GM-Holden and the Co-operative research Centre for Advanced Automotive Technology (AutoCRC), in Australia. In cases where data from the Australian economy was unavailable, such as the data relating to energy recovery methods, a generic data set based on European recycling companies was employed. The characterization factors used for normalization of data were taken from (Saling et. al. Int J Life Cycle Assess 7(4):203–218 2002) which detailed the method of carrying out an LCA. Results  The production phase results in maximum raw material consumption for all materials, and it is higher for metals than for the composite. Energy consumption is greatest in the use phase, with maximum consumption for steel. Aluminium consumes most energy in the production phase. Global Warming Potential (GWP) also follows a trend similar to that of energy consumption. Photo Oxidants Creation Potential (POCP) is the highest for the landfill scenario for the composite, followed by steel and aluminium. Acidification Potential (AP) is the highest for all the end-of-life scenarios of the composite. Ozone Depletion Potential (ODP) is the highest for the metals. The net water emissions are also higher for composite in comparison to metals despite high pollution in the production phases of metallic door skins. Solid wastes are higher for the metallic door skins. Discussion  The composite door skin has the lowest energy consumption in the production phase, due to the low energy requirements during the manufacturing of E-glass and its fusion with polypropylene to form sheet molding compounds. In general, the air emissions during the use phase are strongly dependent on the mass of the skins, with higher emissions for the metals than for the composite. Material recovery through recycling is the highest in metals due to efficient separation techniques, while mechanical recycling is the most efficient for the composite. The heavy steel skins produce the maximum solid wastes primarily due to higher fuel consumption. Water pollution reduction benefit is highest in case of metals, again due to the high efficiency of magnetic separation technique in the case of steel and eddy current separation technique in the case of aluminium. Material recovery in these metals reduces the amount of water needed to produce a new door skin set (water employed mainly in the ingot casting stage). Moreover, the use of heavy metals, inorganic salts and other chemicals is minimized by efficient material recovery. Conclusions  The use of the studied type of steel for the door skins is a poor environmental option in every impact category. Aluminium and composite materials should be considered to develop a more sustainable and energy efficient automobile. In particular, this LCA study shows that glass-fiber composite skins with mechanical recycling or energy recovery method could be environmentally desirable, compared to aluminium and steel skins. However, the current limit on the efficiency of recycling is the prime barrier to increasing the sustainability of composite skins. Recommendations and perspectives  The study is successful in developing a detailed LCA for the three different types of door skin materials and their respective recycling or end-of-life scenarios. The results obtained could be used for future work on an eco-efficiency portfolio for the entire car. However, there is a need for a detailed assessment of toxicity and risk potentials arising from each of the four different types of door skin sets. This will require greater communication between academia and the automotive industry to improve the quality of the LCA data. Sensitivity analysis needs to be performed such as the assessment of the impact of varying substitution factors on the life cycle of a door skin. Incorporation of door skin sets made of new biomaterials need to be accounted for as another functional unit in future LCA studies. Discussion contributions to this article from the readership would the highly welcome. The authors     

Survival and recovery of Phaeocystis antarctica (Prymnesiophyceae) from prolonged darkness and freezing

The colony-forming haptophyte Phaeocystis antarctica is an important primary producer in the Ross Sea, and must survive long periods of darkness and freezing temperature in this extreme environment. We conducted experiments on the responses of P. antarctica-dominated phytoplankton assemblages to prolonged periods of darkness and freezing. Chlorophyll and photosynthetic capacity of the alga declined nonlinearly and independently of each other in the dark, and darkness alone would potentially reduce photosynthetic capacity by only 60 per cent over 150 days (approximately the length of the Antarctic winter in the southern Ross Sea). The estimated reduction of colonial mucous carbon is higher than that of colonial cell carbon, suggesting metabolism of the colonial matrix in the dark. The alga quickly resumed growth upon return to light. Phaeocystis antarctica also survived freezing, although longer freezing durations lengthened the lag before growth resumption. Particulate dimethylsulfoniopropionate relative to chlorophyll increased upon freezing and decreased upon darkness. Taken together, the abilities of P. antarctica to survive freezing and initiate growth quickly after darkness may provide it with the capability to survive in both the ice and the water column, and help explain its repeated dominance in austral spring blooms in the Ross Sea and elsewhere in the Southern Ocean.     

Evidence from the domestication of apple for the maintenance of autumn colours by coevolution

The adaptive value of autumn colours is still a puzzle for evolutionary biology. It has been suggested that autumn colours are a warning signal to insects that use the trees as a host. I show that aphids (Dysaphis plantaginea) avoid apple trees (Malus pumila) with red leaves in autumn and that their fitness in spring is lower on these trees, which suggests that red leaves are an honest signal of the quality of the tree as a host. Autumn colours are common in wild populations but not among cultivated apple varieties, which are no longer under natural selection against insects. I show that autumn colours remain only in the varieties that are very susceptible to the effects of a common insect-borne disease, fire blight, and therefore are more in need of avoiding insects. Moreover, varieties with red leaves have smaller fruits, which shows that they have been under less effective artificial selection. This suggests a possible trade off between fruit size, leaf colour and resistance to parasites. These results are consistent with the hypothesis that autumn colours are a warning signal to insects, but not with other hypotheses.     

Sediment (grain size and clay mineralogy) and organic matter quality control on living benthic foraminifera

The paleoecological interpretation of fossil foraminiferal assemblages depends on an understanding of the ecological processes operating at the present. This study investigates both the quality of organic matter (OM) by elemental analysis as well as the sediment grain size and clay mineralogy to understand their relative influence on distribution and abundance of benthic foraminifera. This study is carried out on 15 samples regularly spaced from the mudflat to the tidal marsh. The results indicate that grain size is the most limiting parameter. Living (stained) benthic foraminiferal density and species richness are both very low within coarser sediments. OM is the second limiting factor. The density of foraminifera is the lowest and the species richness is the highest with the lowest organic carbon (C_org) contents and C/N < 12. Conversely, when the C_org is very high and C/N > 12, the density is high and the species richness medium. A high smectite proportion within the clay-size fraction seems to favor the development of Miliammina fusca. Trochammina inflata and Jadammina macrescens are both favored by an increase of organic carbon proportion but Trochammina inflata preferentially feeds on algal-derived OM when compared with Jadammina macrescens.     

Cultured astrocytes derived from corpus callosum or cortical grey matter show distinct glutamate handling properties

While the astrocytic control of extracellular glutamate concentration at synaptic contacts is well characterized, little is known regarding the clearance of glutamate along axon tracts, even though local excitotoxic damage has been reported. Therefore, we have compared glutamate handling in astrocyte cultures derived from white matter (corpus callosum) and grey matter tissues (cortical structures). These populations of astrocytes showed clearly distinct phenotypes, adopting stellate or protoplasmic morphologies respectively. In addition, white matter astrocytes showed high densities of the intermediate filament proteins glial fibrillary acidic protein, vimentin and nestin. The glutamate–aspartate transporter and glutamate transporter‐1, as well as glutamine synthetase, were found to be expressed at higher levels in white matter compared with grey matter astrocytes. Consistent with this aspartate uptake capacity was three to fourfold higher in white matter cells, and the use of specific inhibitors revealed a substantial activity of glutamate transporter‐1, contrasting with grey matter cells where this transporter appeared poorly functional. In addition, expression of type 5 metabotropic glutamate receptors was considerably higher in white matter astrocytes where the agonist (S)‐3,5‐dihydroxyphenylglycine triggered a large release of intracellular calcium. Differences in these astrocyte cultures were also observed when exposed to experimental conditions that trigger glial activation. This study highlights typical features of cultured astrocytes derived from white matter tissues, which appear constitutively adapted to handle excitotoxic insults. Moreover, the expression and activity of the astroglial components involved in the control of glutamatergic transmission are reinforced when these cells are maintained under conditions mimicking a gliotic environment.     

八角茴香春果和秋果以及不同部位的莽草酸含量分析

采用HPLC法对不同季节和不同部位的八角茴香药材主成分莽草酸的含量进行分析,发现枝条、叶片、春果、秋果的莽草酸含量依次为2.64%、4.94%、8.63%、12.16%;色谱条件:Venusil HILIC(5μm,4.6 mm×250 mm)色谱柱,流动相:乙腈-0.5%三氟乙酸(95:5),流速1.0 mL·min~(-1),检测波长为210 nm。莽草酸进样量在0.001～6μg范围内线性关系良好。莽草酸的线性回归相关系数r=0.9984,平均回收率为98.4%,相对标准偏差(RSD)为1.26%。该研究为制定八角茴香药材质量检测标准提供了简便、快速、准确的方法。