Comparison of stress distribution in dental crown with different cusp angles: 3D finite element analysis

The purpose of this study is to measure the failure risk of a crown depending on the cusp angle. Three all-ceramic crown models consisting of C_H (high incline), C_M (middle incline), and C_L (low incline) are designed. Stress is applied to the crown with Loading case-1 (top of cusp tip) and Loading case-2 (middle of cusp ridge) with the use of FEA software. In Loading case-1 and case-2, the C_H showed the highest Maximum Principal Stress (MPS) while the CL showed the lowest MPS. The cusp angle is an influential factor affecting stress distribution in dental crowns.     

High-resolution nuclear magnetic resonance spectroscopy studies of polysaccharides crosslinked by sodium trimetaphosphate: a proposal for the reaction mechanism

An NMR spectroscopy study ((31)P, (1)H, (13)C) of the postulated crosslinking mechanism of sodium trimetaphosphate (STMP) on polysaccharides is reported using methyl alpha-D-glucopyranoside as a model. In a first step, reaction of STMP with Glc-OMe gives grafted sodium tripolyphosphate (STPP(g)). On the one hand, STTP(g) can react with a second alcohol functionality to give a crosslinked monophosphate. On the other hand, a monophosphate (grafted phosphate) could be obtained by alkaline degradation of STPP(g). NMR spectroscopy allows to detect the various species formed and to obtain the crosslinking density of STMP-polysaccharides hydrogels.     

Wax removal for accelerated cotton scouring with alkaline pectinase

A rational approach has been applied to design a new environmentally acceptable and industrially viable enzymatic scouring process. Owing to the substrate specificity, the selection of enzymes depends on the structure and composition of the substrate, i.e. cotton fibre. The structure and composition of the outer layers of cotton fibre has been established on the basis of thorough literature study, which identifies wax and pectin removal to be the key steps for successful scouring process. Three main issues are discussed here, i.e. benchmarking of the existing alkaline scouring process, an evaluation of several selected acidic and alkaline pectinases for scouring, and the effect of wax removal treatment on pectinase performance. It has been found that the pectinolytic capability of alkaline pectinases on cotton pectin is nearly 75% higher than that of acidic pectinases. It is concluded that an efficient wax removal prior to pectinase treatment indeed results in improved performance in terms of hydrophilicity and pectin removal. To evaluate the hydrophilicity, the structural contact angle (theta) was measured using an auto-porosimeter.     

Density functional theory and molecular dynamics investigations on substituted banana-shaped compounds

Density functional theory (DFT) calculations and molecular dynamics (MD) simulations on the atomic level were performed on three different substituted banana-shaped compounds derived from 1,3-phenylene bis[4-(4-n-hexyloxyphenyliminomethyl)benzoate] (P-6-O-PIMB). The DFT studies were carried out on the isolated molecules, and in the MD simulations clusters were treated with up to 64 monomers. The effect of polar substituents, such as chlorine and the nitro group, on the central 1,3-phenylene unit of banana-shaped compounds was investigated. In particular, flexibility, polarity, electrostatic potential (ESP) group charge distributions, B-factors, bending angles and molecular lengths were considered. The MD results were analysed by trajectories of significant torsion angles as well as order parameters such as radial atom pair distribution functions g(r), orientational correlation functions g(o), diffusion coefficients (D) and root mean square deviations (RMSD) values. The g(r) and g(o) values show that a certain long range order is generated by the introduction of a NO₂ group in the 2-position of the central 1,3-phenylene ring. In contrast, the chlorination at the 4 and 6 positions of the central 1,3-phenylene unit decreases the long range order tendency by its perturbation effect on the conformations in such molecules. Moreover, g(r) and g(o) values, as well as diffusion coefficients, show that in the NO₂ substituted compound the formation of microphase areas is preferred. Finally, the aggregation effect in such compounds was studied in a systematic way by a comparison of the conformational properties of the isolated molecules and the monomers in the clusters. Figure Molecular dynamics (MD) simulations on the aggregation behaviour of substituted banana-shaped compounds Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Validity and reliability of a shoe-embedded sensor module for measuring foot progression angle during over-ground walking

Wearable systems are becoming increasingly popular for gait assessment outside of laboratory settings. A single shoe-embedded sensor module can measure the foot progression angle (FPA) during walking. The FPA has important clinical utility, particularly in populations with knee osteoarthritis, as it is a target for biomechanical treatments. However, the validity and the day-to-day reliability of FPA measurement using wearable systems during over-ground walking has yet to be established. Two gait analysis sessions on 20 healthy adults were conducted. During both sessions, participants performed natural over-ground walking in a motion capture laboratory and on a 100 m linear section of outdoor athletics track. FPA was measured in the laboratory via marker trajectory data, while the sensor module measured FPA during the outdoor track walking. Validity was examined by comparing the laboratory- and sensor-measured average FPA. Day-to-day reliability was examined by comparing the sensor-measured FPA between the first and second gait analysis sessions. Average absolute error between motion capture and sensor measured FPA were 1.7° and 2.1° at session 1 and 2, respectively. A Bland and Altman plot indicated no systematic bias, with 95% limit of agreement widths of 4.2° – 5.1°. Intraclass correlation coefficient (ICC_2k) analysis resulted in good to excellent validity (ICC = 0.89 – 0.91) and reliability (ICC = 0.95). Overall, the shoe-embedded sensor module is a valid and reliable method of measuring FPA during over-ground walking without the need for laboratory equipment.     

小角X射线散射实验中蛋白质溶液的辐照损伤及防护方法

随着同步辐射光源（尤其是目前快速发展的第四代同步辐射光源）技术的进步,可用于实验的辐射通量越来越高,实验样品（特别是蛋白质等生物大分子样品）受到的辐照损伤也越来越严重。在全球现有的同步辐射装置上,蛋白质等生物大分子溶液专用小角X射线散射（SAXS）实验站的光子通量基本上都在1013cps量级。在如此高的通量下,蛋白质等生物大分子溶液样品在实验测量中受到的辐照损伤极其严重。如果没有有效的辐照防护措施,蛋白质溶液样品在毫秒级辐照时间内便会辐照损伤,导致不能获取有效的实验数据。辐照损伤严重制约了SAXS实验技术在蛋白质溶液样品方面的应用。因而,认识蛋白质溶液样品辐照损伤的产生机理、影响因素、判断标准,以及有效降低辐照损伤程度、延缓辐照损伤产生时间的方法,对于蛋白质等生物大分子溶液的散射实验具有重要的指导意义。本文在简要概述生物大分子溶液样品辐照损伤产生机理、影响因素、辐照剂量等基本概念的基础上,重点综述了同步辐射SAXS实验中辐照损伤的判断标准和防护措施。此外,本文还对比了各种防护措施的优缺点,讨论了在建HEPS新光源中SAXS束线可用的散射数据采集时间,指出辐照损伤防护剂是有价值的研究方向...     

Mutational analysis of CYP1B1 (rs56010818) variant in primary open angle glaucoma (POAG) affected patients of Pakistan

BackgroundPrimary open angle glaucoma (POAG) occurs due to the discrepancies in the angle of anterior chamber characterized by the alterations in intraocular pressure, optic nerves head changes and central loss of visual field. In molecular research, CYP1B1 mutations modulates an integral role in association with glaucoma. Current study was undertaken to reveal the homozygous and heterozygous patterns of CYP1B1 c.1169 G > A variant (rs56010818) in POAG patients of Pakistan.MethodsAfter consent, total n = 88 POAG patients undergone through standard ophthalmological investigations before their recruitment in this study. The blood samples were utilized for DNA isolation. The genotyping of CYP1B1 c.1169 G > A variant was carried out by Sanger sequencing. The mutational patterns and its association with clinical variables were demonstrated by statistical and bioinformatic tools.ResultsIt was evident that the frequencies of heterozygous G/A and homozygous mutants A/A genotypes were higher in males (36.5%, 7.7%) than females (30.6%, 2.8%) of POAG population. Furthermore, the juvenile patients exhibit high manifestation of carrier genotype (66.6%) in comparison to adult patients (31.7%). The results also indicated the significant relationship of intraocular pressure with homozygous mutant A/A genotype of CYP1B1 variant in POAG patients (p < 0.05).ConclusionsOur study provided the mutational data of CYP1B1 R390H variant and the patterns of homozygosity and heterozygosity along with clinical associations. Overall, this study revealed the genetic predisposition of CYP1B1 c.1169 G > A variant in the patients of POAG in Pakistan. The findings could be helpful for genetic screening and in-depth understanding of underlying causes in the pathogenesis of POAG.     

Relationships between amino acid sequence and backbone torsion angle preferences

Statistical averages and correlations for backbone torsion angles of chymotrypsin inhibitor 2 are calculated by using the Rotational Isomeric States model of chain statistics. Statistical weights of torsional states of phipsi pairs, needed for the statistics of the full chain, are obtained in two different ways: 1) by using knowledge-based pairwise dependent phipsi energy maps from Protein Data Bank (PDB) and 2) by collecting torsion angle data from a large number of random coil configurations of an all-atom protein model with volume exclusion. Results obtained by using PDB data show strong correlations between adjacent torsion angle pairs belonging to both the same and different residues. These correlations favor the choice of the native-state torsion angles, and they are strongly context dependent, determined by the specific amino acid sequence of the protein. Excluded volume or steric clashes, only, do not introduce context-dependent phipsi correlations into the chain that would affect the choice of native-state torsional angles.     

Dipolar assisted rotational resonance NMR of tryptophan and tyrosine in rhodopsin

Two dimensional (2D) solid-state (13)C.(13)C dipolar recoupling experiments are performed on a series of model compounds and on the visual pigment rhodopsin to establish the most effective method for long range distance measurements in reconstituted membrane proteins. The effects of uniform labeling, inhomogeneous B(1) fields, relaxation and dipolar truncation on cross peak intensity are investigated through NMR measurements of simple amino acid and peptide model compounds. We first show that dipolar assisted rotational resonance (DARR) is more effective than RFDR in recoupling long-range dipolar interactions in these model systems. We then use DARR to establish (13)C-(13)C correlations in rhodopsin. In rhodopsin containing 4'-(13)C-Tyr and 8,19-(13)C retinal, we observe two distinct tyrosine-to-retinal correlations in the DARR spectrum. The most intense cross peak arises from a correlation between Tyr268 and the retinal 19-(13)CH(3), which are 4.8 A apart in the rhodopsin crystal structure. A second cross peak arises from a correlation between Tyr191 and the retinal 19-(13)CH(3), which are 5.5 A apart in the crystal structure. These data demonstrate that long range (13)C em leader (13)C correlations can be obtained in non-crystalline integral membrane proteins reconstituted into lipid membranes containing less than 150 nmoles of protein. In rhodopsin containing 2-(13)C Gly121 and U-(13)C Trp265, we do not observe a Trp-Gly cross peak in the DARR spectrum despite their close proximity (3.6 A) in the crystal structure. Based on model compounds, the absence of a (13)C em leader (13)C cross peak is due to loss of intensity in the diagonal Trp resonances rather than to dipolar truncation.     

Adaptive Growth of Gymnosperm Branches-Ultrastructural and Micromechanical Examinations

The top, the lateral and the underside of basal branch segments of two gymnosperm species, spruce (Picea abies [L.] Karst.) and yew (Taxus baccata L.), were studied with respect to possible adaptation in structural and mechanical properties. Microtensile tests were performed on thin wet foils, which were removed from the periphery of the branches. Structural parameters such as density and the microfibril angle in the S2-layer were examined to investigate the structure-function relationships of the branch wood. The top, the lateral and the underside of both branches showed significant differences in their structural and mechanical properties. However, no significant variations were observed as a function of age and size development. The findings were discussed in view of adaptive growth strategies of trees, including biomechanical constraints of a horizontally growing branch.