Affinity pulldown of γ‐secretase and associated proteins from human and rat brain

γ‐Secretase is a transmembrane protease complex responsible for the processing of a multitude of type 1 transmembrane proteins, including amyloid precursor protein (APP) and Notch. A functional complex is dependent on the assembly of four proteins: presenilin (PS), nicastrin, Aph‐1 and Pen‐2. Little is known about how the substrates are selected by γ‐secretase, but it has been suggested that γ‐secretase associated proteins (GSAPs) could be of importance. For instance, it was recently reported from studies in cell lines that TMP21, a transmembrane protein involved in trafficking, binds to γ‐secretase and regulates the processing of APP‐derived substrates without affecting Notch cleavage. Here, we present an efficient and selective method for purification and analysis of γ‐secretase and GSAPs. Microsomal membranes were prepared from rat or human brain and incubated with a γ‐secretase inhibitor coupled to biotin via a long linker and a S‐S bridge. After pulldown using streptavidin beads, bound proteins were eluted under reducing conditions and digested by trypsin. The tryptic peptides were subjected to LC‐MS/MS analysis, and proteins were identified by sequence data from MS/MS spectra. All of the known γ‐secretase components were identified. Interestingly, TMP21 and the PS associated protein syntaxin1 were associated to γ‐secretase in rat brain. We suggest that the present method can be used for further studies on the composition of the γ‐secretase complex.     

Direct Analysis of Single Cells by Mass Spectrometry at Atmospheric Pressure

Analysis of biochemicals in single cells is important for understanding cell metabolism, cell cycle, adaptation, disease states, etc. Even the same cell types exhibit heterogeneous biochemical makeup depending on their physiological conditions and interactions with the environment. Conventional methods of mass spectrometry (MS) used for the analysis of biomolecules in single cells rely on extensive sample preparation. Removing the cells from their natural environment and extensive sample processing could lead to changes in the cellular composition. Ambient ionization methods enable the analysis of samples in their native environment and without extensive sample preparation.¹ The techniques based on the mid infrared (mid-IR) laser ablation of biological materials at 2.94 μm wavelength utilize the sudden excitation of water that results in phase explosion.² Ambient ionization techniques based on mid-IR laser radiation, such as laser ablation electrospray ionization (LAESI) and atmospheric pressure infrared matrix-assisted laser desorption ionization (AP IR-MALDI), have successfully demonstrated the ability to directly analyze water-rich tissues and biofluids at atmospheric pressure.^3-11 In LAESI the mid-IR laser ablation plume that mostly consists of neutral particulate matter from the sample coalesces with highly charged electrospray droplets to produce ions. Recently, mid-IR ablation of single cells was performed by delivering the mid-IR radiation through an etched fiber. The plume generated from this ablation was postionized by an electrospray enabling the analysis of diverse metabolites in single cells by LAESI-MS.¹² This article describes the detailed protocol for single cell analysis using LAESI-MS. The presented video demonstrates the analysis of a single epidermal cell from the skin of an Allium cepa bulb. The schematic of the system is shown in Figure 1. A representative example of single cell ablation and a LAESI mass spectrum from the cell are provided in Figure 2.     

Differences in metabolite profile between blood plasma and serum

In metabolomic research, blood plasma and serum have been considered to possess similar compositions and properties. Their perceived equivalence has resulted in researchers choosing arbitrarily between serum and plasma for analysis. Here, routine serum and plasma were prepared and their low-molecular-weight compounds were determined using gas chromatography/time-of-flight mass spectrometry. Principal components analysis was applied to process the acquired data, and marked differences in metabolite profiles were observed between serum and plasma. Of the 72 identified compounds, 36 (50%) discriminate serum from plasma, with 29 and 7 metabolites showing a significantly higher abundance (t test, P < 0.05) in serum and plasma, respectively. Incubation of blood had distinct effects on the analyte peak areas, with the effects being more pronounced for plasma than for serum and more pronounced for a shorter incubation than for a longer incubation. These results highlight the importance in choosing serum or plasma as the analytical sample and in stipulating the incubation time. Because incubation affected the analyte peak areas less in serum than in plasma, we recommend serum as the sample of choice in metabolomic studies.     

Psb30 contributes to structurally stabilise the Photosystem II complex in the thermophilic cyanobacterium Thermosynechococcus elongatus

A deletion mutant that lacks the Psb30 protein, one of the small subunits of Photosystem II, was constructed in a Thermosynechococcus elongatus strain in which the D1 protein is expressed from the psbA₃ gene (WT*). The ΔPsb30 mutant appears more susceptible to photodamage, has a cytochrome b₅₅₉ that is converted into the low potential form, and probably also lacks the PsbY subunit. In the presence of an inhibitor of protein synthesis, the ?Psb30 lost more rapidly the water oxidation function than the WT* under the high light conditions. These results suggest that Psb30 contributes to structurally and functionally stabilise the Photosystem II complex in preventing the conversion of cytochrome b₅₅₉ into the low potential form. Structural reasons for such effects are discussed.     

Quantitative Optical Microscopy: Measurement of Cellular Biophysical Features with a Standard Optical Microscope

We describe the use of a standard optical microscope to perform quantitative measurements of mass, volume, and density on cellular specimens through a combination of bright field and differential interference contrast imagery. Two primary approaches are presented: noninterferometric quantitative phase microscopy (NIQPM), to perform measurements of total cell mass and subcellular density distribution, and Hilbert transform differential interference contrast microscopy (HTDIC) to determine volume. NIQPM is based on a simplified model of wave propagation, termed the paraxial approximation, with three underlying assumptions: low numerical aperture (NA) illumination, weak scattering, and weak absorption of light by the specimen. Fortunately, unstained cellular specimens satisfy these assumptions and low NA illumination is easily achieved on commercial microscopes. HTDIC is used to obtain volumetric information from through-focus DIC imagery under high NA illumination conditions. High NA illumination enables enhanced sectioning of the specimen along the optical axis. Hilbert transform processing on the DIC image stacks greatly enhances edge detection algorithms for localization of the specimen borders in three dimensions by separating the gray values of the specimen intensity from those of the background. The primary advantages of NIQPM and HTDIC lay in their technological accessibility using “off-the-shelf” microscopes. There are two basic limitations of these methods: slow z-stack acquisition time on commercial scopes currently abrogates the investigation of phenomena faster than 1 frame/minute, and secondly, diffraction effects restrict the utility of NIQPM and HTDIC to objects from 0.2 up to 10 (NIQPM) and 20 (HTDIC) μm in diameter, respectively. Hence, the specimen and its associated time dynamics of interest must meet certain size and temporal constraints to enable the use of these methods. Excitingly, most fixed cellular specimens are readily investigated with these methods.     

Quantifying CD4 receptor protein in two human CD4+ lymphocyte preparations for quantitative flow cytometry

Background

In our previous study that characterized different human CD4+ lymphocyte preparations, it was found that both commercially available cryopreserved peripheral blood mononuclear cells (PBMC) and a commercially available lyophilized PBMC (Cyto-Trol™) preparation fulfilled a set of criteria for serving as biological calibrators for quantitative flow cytometry. However, the biomarker CD4 protein expression level measured for T helper cells from Cyto-Trol was about 16% lower than those for cryopreserved PBMC and fresh whole blood using flow cytometry and mass cytometry. A primary reason was hypothesized to be due to steric interference in anti- CD4 antibody binding to the smaller sized lyophilized control cells.

Method

Targeted multiple reaction monitoring (MRM) mass spectrometry (MS) is used to quantify the copy number of CD4 receptor protein per CD4+ lymphocyte. Scanning electron microscopy (SEM) is utilized to assist searching the underlying reasons for the observed difference in CD4 receptor copy number per cell determined by MRM MS and CD4 expression measured previously by flow cytometry.

Results

The copy number of CD4 receptor proteins on the surface of the CD4+ lymphocyte in cryopreserved PBMCs and in lyophilized control cells is determined to be (1.45 ± 0.09) × 10⁵ and (0.85 ± 0.11) × 10⁵, respectively, averaged over four signature peptides using MRM MS. In comparison with cryopreserved PBMCs, there are more variations in the CD4 copy number in lyophilized control cells determined based on each signature peptide. SEM images of CD4+ lymphocytes from lyophilized control cells are very different when compared to the CD4+ T cells from whole blood and cryopreserved PBMC.

Conclusion

Because of the lyophilization process applied to Cyto-Trol control cells, a lower CD4 density value, defined as the copy number of CD4 receptors per CD4+ lymphocyte, averaged over three different production lots is most likely explained by the loss of the CD4 receptors on damaged and/or broken microvilli where CD4 receptors reside. Steric hindrance of antibody binding and the association of CD4 receptors with other biomolecules likely contribute significantly to the nearly 50% lower CD4 receptor density value for cryopreserved PBMC determined from flow cytometry compared to the value obtained from MRM MS.

Electronic supplementary material

The online version of this article (doi:10.1186/1559-0275-11-43) contains supplementary material, which is available to authorized users.     

Effect of Long Term Exposure to High CO2 Concentrations on Photosynthetic Characteristics of Prunus Avium L. Plants

The effect of two elevated carbon dioxide concentrations, 700 µmol(CO₂) mol^–1 (C700) and 1 400 µmol(CO₂) mol^–1 (C1400), on photosynthetic performances of 1-year-old Prunus avium L. plant was studied. Plants grown at C700 were characterised by increased net photosynthetic rate (P _N) as compared to those grown at C1400. Plant photosynthetic adjustment to C1400 resulted in 27 % higher P _N than in control at atmospheric CO₂ concentration (C _a) at the beginning of the experiment (3–4 weeks) with a consequent decline to the end of the experiment. Thus, 1 400 µmol(CO₂) mol^–1 had short-term stimulatory effect on plant P _N. Both chlorophyll (Chl) a and b concentrations dramatically decreased during exposure to C1400. Compensation irradiance was increased by 57 % in C700 and by 87 % in C1400. Photochemical efficiency () was affected by balloon environment, however, a clear stimulatory effect of C700 was detected. Opposite influence of both elevated CO₂ concentrations on P _Nmax was established: slight increase by C700 (2.7 % at C_a), but considerable decrease by C1400 (63 % at C_a). Exposure to C700 enhanced compensation irradiance by 42 %, while C1400 by only 21 %. Either C700 or C1400 did not reduce stomatal conductance (g _s). Leaf area per plant (LAR) was more stimulated by C700 than by C1400. High unit area leaf mass, specific leaf area, and dry matter accumulation in roots without affecting tissue density characterised plants grown in C1400. However, when considering the root : shoot ratio, these plants allocated less carbon to the roots than plants from other treatments.     

Microbial degradation of quinoline: Kinetic studies with Comamonas acidovorans DSM 6426

The microbial degradation of quinoline by Comamonas acidovorans was studied in a laboratory scale stirred tank reactor. In continuous culture experiments using quinoline as a sole source of carbon and nitrogen, it was shown by means of mass balances that quinoline was converted completely to biomass, carbon dioxide, and ammonia. Degradation rates up to 0.7 g/L h were obtained. Measured yield coefficients Y(x/s) for quinoline were about 0.7 g/g, which is in agreement with the theoretical value for complete mineralization. Kinetic constants based on Haldane substrate inhibition were evaluated. The values were mu(max) = 0.48 h(-1), K(i) = 69 mg/L, and K(s) < 1.45 mg/L. (c) 1993 John Wiley & Sons, Inc.     

A facile method for controlling the reaction equilibrium of sphingolipid ceramide N-deacylase for lyso-glycosphingolipid production

Lyso-glycosphingolipids (lyso-GSLs), the N-deacylated forms of glycosphingolipids (GSLs), are important synthetic intermediates for the preparation of GSL analogs. Although lyso-GSLs can be produced by hydrolyzing natural GSLs using sphingolipid ceramide N-deacylase (SCDase), the yield for this reaction is usually low because SCDase also catalyzes the reverse reaction, ultimately establishing an equilibrium between hydrolysis and synthesis. In the present study, we developed an efficient method for controlling the reaction equilibrium by introducing divalent metal cation and detergent in the enzymatic reaction system. In the presence of both Ca²⁺ and taurodeoxycholate hydrate, the generated fatty acids were precipitated by the formation of insoluble stearate salts and pushing the reaction equilibrium toward hydrolysis. The yield of GM1 hydrolysis can be achieved as high as 96%, with an improvement up to 45% compared with the nonoptimized condition. In preparative scale, 75 mg of lyso-GM1 was obtained from 100 mg of GM1 with a 90% yield, which is the highest reported yield to date. The method can also be used for the efficient hydrolysis of a variety of GSLs and sphingomyelin. Thus, this method should serve as a facile, easily scalable, and general tool for lyso-GSL production to facilitate further GSL research.     

Sequence diversity of the peptaibol antibiotic suzukacillin-A from the mold Trichoderma viride.

From the culture broth of the mold Trichoderma viride, strain 63 C-I, the polypeptide antibiotic suzukacillin (SZ) was isolated. A peptide mixture named SZ-A was obtained by crystallization from crude SZ. Individual peptides from SZ-A were isolated by semipreparative HPLC and sequences were determined by HPLC-ESI-MS. The data confirm a general sequence of SZ-A published previously and in addition establish the individual sequences of 15 acetylated eicosa peptides with C-terminal alcohols. The major peptide SZ-A4 (21% of all peptides) shows the sequence:Ac-Aib-Ala-Aib-Ala-Aib-Ala(6)-Gln-Aib-Lx(9)-Aib-Gly-Aib(12)-Aib-Pro-Vx(15)-Aib-Vx(17)-Gln-Gln-Fol. Amino acid exchanges of the peptaibol are located in position 6 (Ala/Aib), 9 (Vx/Lx), 12 (Aib/Lx), 17 (Aib/Vx) and possibly at position15 (Val/Iva) (uncommon abbreviations: Aib (alpha-aminoisobutyric acid); Iva (D-isovaline); Lx (L-leucine or L-isoleucine); Vx (L-valine or D-isovaline); Fol (L-phenylalaninol)).