Photocatalytic antibacterial effects on TiO2-anatase upon UV-A and UV-A/VIS threshold irradiation

Photocatalysis mediated by the anatase modification of titanium dioxide (TiO₂) has shown antibacterial effects in medical applications. The aim of this study was to investigate the possibility of expanding the excitation wavelengths for photocatalytic antibacterial effects from ultraviolet (UV) into the visible light range. After deposition of salivary pellicle and adhesion of Streptococcus gordonii on anatase, different irradiation protocols were applied to induce photocatalysis: ultraviolet A (UV-A) > 320 nm; ultraviolet/visible (UV-A/VIS) light > 380 nm and > 390 nm; and VIS light 400–410 nm. A quartz crystal microbalance with dissipation (QCM-D) tests and microscopic examination were used to observe the photoinduced antibacterial effects. Salivary pellicle could be photocatalytically decomposed under all irradiation protocols. In contrast, effective photocatalytic attack of bacteria could be observed by UV-A as well as by UV-A/VIS at 380 nm < λ < 390 nm only. Wavelengths above 380 nm show promise for in situ therapeutic antifouling applications.     

农林废弃物混配基质的理化性质及其对油茶幼苗生长效应的综合评价

以腐熟的甘蔗渣( SB)、木薯皮( CP)、花生壳( PS)和火炭灰( BA)及园土( GS)为原料,按照不同体积比配制成9种混配基质,并以等体积比泥炭和园土混配基质为对照,对各基质的理化性质及基质中油茶( Camellia oleifera Abel)幼苗的生长状况进行比较;在对基质理化指标和油茶幼苗的壮苗指数进行线性回归分析和通径分析的基础上,采用主成分分析和综合评价法对各基质的育苗效果进行综合评价。结果表明：9种农林废弃物混配基质的容重、总孔隙度和毛管孔隙度分别为0.23~0.47 g·cm-3、60.90%~67.23%和46.53%~58.27%, pH 6.72~pH 7.14,各基质的速效氮含量、速效磷含量、速效钾含量、pH值、电导率和通气孔隙度均高于或显著高于对照,容重则显著低于对照。在不同基质中油茶幼苗的茎粗、单株叶片数、叶长、叶宽、叶绿素相对含量( SPAD)、单株茎叶干质量、单株根干质量和壮苗指数均存在一定差异,而株高和根冠比却无显著差异;其中S9混配基质也V( SB)：V( CP)：V( BA)=2：1：1页中幼苗的大部分生长指标较高,表现出明显的生长优势。线性回归和通径分析结果显示：除通气孔隙度外,基质的其他8个理化指标基本涵盖了影响幼苗壮苗指数的关键因素;其中,速效钾含量是对壮苗指数直接影响最大的负相关因子,而速效磷含量、电导率和总孔隙度对壮苗指数则有较大的正向直接作用,并且三者通过速效钾含量对壮苗指数产生较大的负向间接作用;此外,基质容重对壮苗指数也有一定的负向直接作用。综合评价结果显示：S9和S7混配基质也V( SB)：V( BA)：V( GS)=4：3：3页对油茶育苗效果的综合得分较高,分别为14.363和14.337,建议将S9混配基质作为油茶育苗的首选替代基质,S7混配基质作为备选基质。     

海藻粉和抗菌肽对肉鸡生长性能、免疫器官指数和肠道菌群的影响

为探讨海藻粉和抗菌肽不同添加水平对肉鸡生长性能、免疫器官指数和肠道菌群的影响。选取1日龄体重相近的AA肉鸡504羽,随机分为7个处理,每处理6个重复,每重复12羽。对照组饲喂基础日粮,试验组在基础日粮中添加不同水平(1.0%、3.0%、5.0%)的海藻粉和抗菌肽(300 mg/kg、600 mg/kg)。试验分前期(1~21 d)和后期(22~42 d)共42 d。结果表明:(1)添加不同水平的海藻粉对前期、后期和全期肉鸡的料重比有显著影响(P0.05);对21日龄肉鸡的脾脏指数和胸腺指数及对42日龄肉鸡的法氏囊指数差异显著(P0.05);降低了21日龄和42日龄肉鸡盲肠大肠杆菌的数量(P0.05),增加了盲肠乳酸菌的数量(P0.05)。(2)添加不同水平的抗菌肽对后期和全期肉鸡的料重比有显著差异(P0.05);对21日龄肉鸡的脾脏指数和胸腺指数及对42日龄肉鸡的法氏囊指数差异显著(P0.05);降低了21日龄和42日龄肉鸡盲肠大肠杆菌的数量(P0.05),增加了盲肠乳酸菌的数量(P0.05)。(3)海藻粉和抗菌肽交互作用对前期、后期和全期肉鸡的料重比有明显影响(P0.05);对21日龄肉鸡的脾脏指数和胸腺指数及对42日龄肉鸡的法氏囊指数差异显著(P0.05);降低了21日龄和42日龄肉鸡盲肠大肠杆菌的数量(P0.05),增加了盲肠乳酸菌的数量(P0.05)。本研究得出以下结论,海藻粉和抗菌肽能促进肉鸡生长,提高肉鸡免疫器官指数和改善肠道菌群,且二者间存在协同效应,添加5%的海藻粉和300 mg/kg抗菌肽综合效果最佳。     

壳寡糖对大肠杆菌抑菌活性研究

分析壳寡糖对大肠杆菌抑菌效果的影响因素.采用摇瓶法和ELISA板法对不同浓度的壳寡糖进行抑菌试验;比较不同pH、不同脱乙酰度的壳寡糖对大肠杆菌抑菌效果的差异;比较不同聚合度的单一聚合度壳寡糖抑菌效果的差异.壳寡糖浓度大于5 mg/mL时抑菌效果与同浓度苯甲酸钠相近;pH为4时,0.156 mg/mL的壳寡糖溶液抑菌活性即能超过90%;pH为7时,5 mg/mL的壳寡糖才能达到90%抑菌活性.脱乙酰度为95%时,5 mg/mL的壳寡糖溶液抑菌活性能超过97%;脱乙酰度为45%时,40 mg/mL的壳寡糖溶液抑菌活性仅有56%;聚合度大于4的单一聚合度壳寡糖40 mg/mL时抑菌活性能达到99%.结果表明:提高壳寡糖溶液浓度、降低pH、提高脱乙酰度,能提高壳寡糖的抑菌活性,单一聚合度壳寡糖聚合度越高,对大肠杆菌的抑制作用越强.此外,采用ELISA板的方法进行实验,即节省试药又方便快捷.     

不同抗生素对金发草愈伤组织生长分化的影响

该研究以金发草愈伤组织为材料,通过分析比较不同抗生素种类(卡那霉素、潮霉素、头孢噻呋钠和氨苄青霉素)和浓度对金发草愈伤组织生长分化的影响,来确定适用于金发草遗传转化体系中的抗性筛选剂和抑菌剂。结果表明：(1)金发草愈伤组织对卡那霉素很敏感,且其分化率随着卡那霉素浓度的增加显著减少( P＝0.01)。当卡那霉素浓度为10 mg·L-1时,金发草愈伤组织的生长分化受到明显抑制,且有大量的白化苗形成,但分化率仍有36.56％;当卡那霉素浓度为15 mg·L-1时,金发草愈伤组织的分化率为11.94％,只有很少部分的愈伤分化出绿色的丛生苗;当卡那霉素浓度为20 mg·L-1时,金发草愈伤组织基本褐化死亡,分化率仅为2.26％。因此,浓度为15 mg·L-1的卡那霉素适合作为金发草遗传转化体系中的抗性筛选剂。(2)金发草愈伤组织对潮霉素的敏感性要比卡那霉素弱,且潮霉素对金发草愈伤组织分化率的影响小,但毒害作用大。因此,潮霉素不适合作为金发草遗传转化体系中的抗性筛选剂。(3)300 mg·L-1的头孢霉素和氨苄青霉素对金发草愈伤组织生长分化影响很小且能有效抑制杂菌的生长,较高浓度的氨苄青霉素对金发草愈伤组织的抑制作用不太明显。因此,300 mg·L-1的头孢霉素和较高浓度的氨苄青霉素均可作为金发草遗传转化体系中的抑菌剂。该研究确定了适用于农杆菌介导的金发草遗传转化体系中的抗性筛选剂和抑菌剂,为金发草的遗传改良及功能性基因的研究奠定了基础。     

Synthesis of Disulfide‐Bridged N‐Phenyl‐N′‐(alkyl/aryl/heteroaryl)urea Derivatives and Evaluation of Their Antimicrobial Activities

The discovery of new antimicrobial agents is extremely needed to overcome multidrug‐resistant bacterial and tuberculosis infections. In the present study, eight novel substituted urea derivatives ( 10a – 10h ) containing disulfide bond were designed, synthesized and screened for their in vitro antimicrobial activities on standard strains of Gram‐positive and Gram‐negative bacteria as well as on Mycobacterium tuberculosis. According to the obtained results, antibacterial effects of the compounds were found to be considerably better than their antimycobacterial activities along with their weak cytotoxic effects. Molecular docking studies were performed to gain insights into the antibacterial activity mechanism of the synthesized compounds. The interactions and the orientation of compound 10a (1,1′‐((disulfanediylbis(methylene))bis(2,1‐phenylene))bis(3‐phenylurea)) were found to be highly similar to the original ligand within the binding pocket E. faecalis β‐ketoacyl acyl carrier protein synthase III (FabH). Finally, a theoretical study was established to predict the physicochemical properties of the compounds.     

Enantiomeric Polyketides from the Starfish‐Derived Symbiotic Fungus Penicillium sp. GGF16‐1‐2

One new racemic mixture, penicilliode A ( 1 ) and four pairs of enantiomeric polyketides, penicilliode B and C ( 2 and 3 ) and coniochaetone B and C ( 4 and 5 ), were obtained from the starfish‐derived symbiotic fungus Penicillium sp. GGF16‐1‐2. Interestingly, the strain GGF16‐1‐2 can produce enantiomers. The absolute configuration of 1 was determined by X‐ray diffraction (XRD) analysis, and the absolute configurations of 2 – 4 were determined by the optical rotation (OR) values and electronic circular dichroism (ECD) calculations. Compounds 1 – 5 were firstly isolated from the marine‐derived fungus Penicillium as racemates, and 2 – 5 were separated by HPLC with a chiral stationary phase. All the compounds were evaluated for their antibacterial, cytotoxic and inhibitory activities against PDE4D2.     

Copper Oxide Nanomaterials Derived from Zanthoxylum armatum DC. and Berberis lycium Royle Plant Species: Characterization,Assessment of Free Radical Scavenging and Antibacterial Activity

Copper oxide nanomaterials were synthesized by a facile sustainable biological method using two plant species (Zanthoxylum armatum DC. and Berberis lycium Royle ). The formation of materials was confirmed by FT‐IR, ATR, UV‐visible, XRD, TEM, SEM, EDX, TGA and PL. The antibacterial activity was evaluated by agar well diffusion method to ascertain the efficacy of plant species extract and extract derived copper oxide nanomaterials against six Gram‐positive bacteria namely Staphylococcus aureus, Streptococcus mutans, Streptococcus pyogenes, Corynebacterium diphtheriae, Corynebacterium xerosis, Bacillus cereus and four Gram‐negative bacteria such as Klebsiella pneumonia, Escherichia coli, Pseudomonas aeruginosa and Proteus vulgaris against the standard drug, Ciprofloxacin for Gram‐positive and Gentamicin for Gram‐negative bacteria, respectively. In both cases, copper oxide nanomaterials were found to be sensitive in all the bacterial species. Sensitivity of copper oxide nanomaterials shows an be higher as compared to plant species extract against different bacteria. Scavenging activity of plant extracts along with nanomaterials have been accessed using previously reported protocols employing ascorbic acid as standard. Scavenging activity of copper oxide nanomaterials shows an increase with increase in concentration. The biological activity (bactericidal and scavenging efficiency) of plant derived copper oxide nanomaterials revealed that these materials can be used as potent antimicrobial agent and DPPH scavengers in industrial as well as pharmacological fields.     

Brominated Diphenyl Ethers Including a New Tribromoiododiphenyl Ether from the Vietnamese Marine Sponge Arenosclera sp. and Their Antibacterial Activities

A new tribromoiododiphenyl ether ( 1 ) and eight known brominated diphenyl ethers ( 2 – 9 ) were isolated from the MeOH extract of the sponge Arenosclera sp. collected in Vietnam, using repeated open column chromatography and preparative thin layer chromatography. The chemical structure of the new compound 1 was determined by analyses of spectroscopic (1D‐ and 2D‐NMR, and MS) data and by comparison of our data with those reported in the literature. Compounds 1 , 3 , and 8 exhibited strong antibacterial activities against the Gram‐positive bacteria Bacillus subtilis and Staphylococcus aureus and the Gram‐negative bacterium Klebsiella pneumoniae with MIC values ranging from 0.8 to 6.3 μm , while compounds 5 and 7 only displayed activities against Gram‐positive bacteria with MIC values from 0.5 to 3.1 μm . Compound 2 showed activities against the four tested bacteria with MIC values ranging from 0.5 to 6.3 μm .     

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Ni‐rich Li[Ni_xCo_yMn_1?x?y]O₂ (x ≥ 0.8) layered oxides are the most promising cathode materials for lithium‐ion batteries due to their high reversible capacity of over 200 mAh g^?1. Unfortunately, the anisotropic properties associated with the α‐NaFeO₂ structured crystal grains result in poor rate capability and insufficient cycle life. To address these issues, a micrometer‐sized Ni‐rich LiNi_0.8Co_0.1Mn_0.1O₂ secondary cathode material consisting of radially aligned single‐crystal primary particles is proposed and synthesized. Concomitant with this unique crystallographic texture, all the exposed surfaces are active {010} facets, and 3D Li⁺ ion diffusion channels penetrate straightforwardly from surface to center, remarkably improving the Li⁺ diffusion coefficient. Moreover, coordinated charge–discharge volume change upon cycling is achieved by the consistent crystal orientation, significantly alleviating the volume‐change‐induced intergrain stress. Accordingly, this material delivers superior reversible capacity (203.4 mAh g^?1 at 3.0–4.3 V) and rate capability (152.7 mAh g^?1 at a current density of 1000 mA g^?1). Further, this structure demonstrates excellent cycling stability without any degradation after 300 cycles. The anisotropic morphology modulation provides a simple, efficient, and scalable way to boost the performance and applicability of Ni‐rich layered oxide cathode materials.