Interaction between eggshell temperature and carbon dioxide concentration after day 8 of incubation on broiler chicken embryo development

Carbon dioxide (CO₂) is considered to be an important factor during incubation of eggs. Effects attributed to higher CO₂ concentrations during experiment might be due to confounding effects of other environmental conditions, such as incubation temperature. To disentangle effects of eggshell temperature (EST) and CO₂ concentration, an experiment was conducted. A total of 630 Cobb 500 hatching eggs from 37 to 45 wk commercial breeder flocks were collected and incubated according to treatments. The experiment was setup as a complete randomized 2 × 3 factorial design, resulting in 6 treatments. From day 8 of incubation onward, broiler eggs were exposed to one of two EST (37.8 or 38.9 °C) and one of three CO₂ concentrations (0.1, 0.4 or 0.8%). Eggs were incubated in climate-respiration chambers and metabolic heat production was determined continuously. At day 18 of incubation and at 6 h after hatching, embryo and chicken quality were determined by evaluation of organ weights, navel condition, blood metabolites and hepatic glycogen. Hatching time and chicken length at 6 h after hatching showed an interaction between EST and CO₂ concentration (both P = 0.001). Furthermore, no effect of CO₂ concentration was found on embryo development or chicken quality. Metabolic heat production between day 8 and 18 of incubation was not affected by either EST or CO₂. At day 18 of incubation, an EST of 38.9 °C resulted in a higher egg weight loss, longer embryos, higher yolk free body mass (YFBM) and lower heart weight than an EST of 37.8 °C (all P < 0.008). At 6 h after hatching, an EST of 38.9 °C resulted in a higher residual yolk weight and lower YFBM, liver weight and heart weight than an EST of 37.8 °C (all P < 0.003). Lactate, uric acid and hepatic glycogen were not affected by EST at either day 18 of incubation or at hatch. Glucose was not affected by EST at day 18 of incubation, but at hatch, it was higher at an EST of 37.8 °C than at an EST of 38.9 °C (P = 0.02). It can be concluded that effects of CO₂ concentration (at concentrations ≤0.8%) on embryonic development and chicken quality appear to be limited when EST is maintained at a constant level. Moreover, a higher EST from day 8 of incubation onward appears to negatively affect chicken quality at hatch.     

生态系统多功能性的指标选择与驱动因子: 研究现状与展望

全球变化和人类活动正以空前的速度在世界范围内改变着生物多样性, 这导致了全球生物多样性的锐减以及生产力的下降、病虫害的增加和抗入侵能力的减弱等生态问题。近30年来, 生态学家开始对于生物多样性的持续丧失是否以及如何影响生态系统功能的问题越来越感兴趣, 生物多样性与生态系统功能(biodiversity and ecosystem functioning, BEF)关系的研究应运而生, 并成为生态学研究的热点之一。但长期以来, 研究者更多地关注单一生态系统功能, 而忽略了生态系统能够同时提供多种生态系统功能的能力, 即生态系统多功能性(ecosystem multifunctionality, EMF)。本文综述了EMF研究中功能指标的选择、生物多样性的不同维度、微生物多样性对EMF的影响以及其他非生物因子对EMF的驱动等进展。因只考虑单一功能可能会低估生物多样性对整体生态系统功能的影响, 故生物多样性与生态系统多功能性(BEMF)关系的研究成为BEF关系研究的重点。近年来, BEMF关系的研究发展较快, 在不同生态系统(包括水生、草地、森林、旱地、农业等)、不同研究尺度(从区域到全球尺度)、BEMF关系的驱动机制(从单一驱动机制到多种驱动机制共同作用)、研究方法(包括新概念以及新的量化方法的提出和应用)等方面均取得了新的进展。但仍有不足之处, 如对于EMF研究中功能指标的选取没有统一的标准、对地下微生物多样性的关注度不够、涉及多营养级水平下的BEMF关系研究较少、驱动EMF的机制仍存在争论等。未来应加强对于功能指标选取的标准研究, 综合分析地上、地下生物多样性以及非生物因子对EMF的整体影响, 加强生态系统多服务性(ecosystem multiserviceability, EMS)方法的研究和应用。     

Is there any relationship between decreased AgNOR protein synthesis and human hair loss?

Argyrophilic nucleolar organizing region associated proteins (AgNORs) play roles in cell proliferation and a variety of diseases. We attempted to determine whether decreased NOR protein synthesis causes human hair loss. We studied 21 healthy males who suffered hair loss on the frontal/vertex portion of the head. Hair root cells from normal and hair loss sites were stained for AgNOR. One hundred nuclei per site were evaluated and the AgNOR number and NORa/TNa proportions of individual cells were determined using a computer program. The cells from normal sites had significantly higher AgNOR counts than those from hair loss sites. Also, the cells from the normal sites had significantly higher NORa/TNa than cells from the hair loss sites. In the normal sites, the cells demonstrated more NOR protein synthesis than cells in hair loss sites. Therefore, decreased NOR protein synthesis appears to be related to hair loss in humans.     

Stain Solubilities Part III

Ethylenediaminetetraacetic acid (EDTA) solution is used to decalcify bone specimens for histological examination. Sodium hydroxide (NaOH) has been used to dissolve EDTA and to bring EDTA solutions to neutral pH. This solution, however, requires several weeks to decalcify bone specimens. We investigated a new de-calcification fluid using concentrated ammonium hydroxide (NH₄OH) to dissolve EDTA and to adjust the pH to neutral. Decalcification was performed using a magnetic stirrer with and without vacuum, or with a sonic cleaner. Decalcification end point was confirmed using both the weight loss and X-ray methods. After decalcification, specimens were processed through paraffin and sections were stained with hematoxylin and eosin. Decalcification employing NH₄OH required an average of six days. Light microscopy indicated good retention of cellular detail.     

Influence of steam and dry heat pretreatment on fibre properties and cellulase degradation of cellulosic fibres

Cellulosic fabric samples of cotton, viscose, lyocell and modal were pretreated with steam and dry heat in the range of 100–190°C. The samples were then treated with a Trichoderma reesei cellulase preparation (total culture filtrate – TC), with mechanical agitation, at a high enzyme dosage of 75% by weight of fabric, for 8 hours. Generally, viscose proved to be easily degradable, followed by cotton and modal. The degree of hydrolysis was the least for Lyocell. Dry heat pretreatments exerted a lower influence on degradation rate than steam pretreatments which showed a distinct maximum at a steam temperature of 130°C. The hydrolysis rate varied strongly depending on treatment conditions and fibre type. Water retention values in treated substrates were changed by up to 20% of initial values.     

Finite element analysis of peri-implant bone volume affected by stresses around Morse taper implants: effects of implant positioning to the bone crest

Abstract

Objectives: The purpose of the present study was to evaluate the distribution and magnitude of stresses through the bone tissue surrounding Morse taper dental implants at different positioning relative to the bone crest. Materials and Methods: A mandibular bone model was obtained from a computed tomography scan. A three-dimensional (3D) model of Morse taper implant-abutment systems placed at the bone crest (equicrestal) and 2?mm bellow the bone crest (subcrestal) were assessed by finite element analysis (FEA). FEA was carried out on axial and oblique (45°) loading at 150 N relatively to the central axis of the implant. The von Mises stresses were analysed considering magnitude and volume of affected peri-implant bone. Results: On vertical loading, maximum von Mises stresses were recorded at 6-7?MPa for trabecular bone while values ranging from 73 up to 118?MPa were recorded for cortical bone. On oblique loading at the equiquestral or subcrestal positioning, the maximum von Mises stresses ranged from 15 to 21?MPa for trabecular bone while values at 150?MPa were recorded for the cortical bone. On vertical loading, >99.9vol.% cortical bone volume was subjected to a maximum of 2?MPa while von Mises stress values at 15?MPa were recorded for trabecular bone. On oblique loading, >99.9vol.% trabecular bone volume was subjected to maximum stress values at 5?MPa, while von Mises stress values at 35?MPa were recorded for >99.4vol.% cortical bone. Conclusions: Bone volume-based stress analysis revealed that most of the bone volume (>99% by vol) was subjected to significantly lower stress values around Morse taper implants placed at equicrestal or subcrestal positioning. Such analysis is commentary to the ordinary biomechanical assessment of dental implants concerning the stress distribution through peri-implant sites.     

Mechanics of the maxillary central incisor. Influence of the periodontal ligament represented by beam elements

This study aimed to evaluate the influence of loading on a maxillary central incisor with the periodontal ligament (PDL) represented by 2D elastic beam elements using a 2D finite element analysis. Two models (M) were built varying the PDL representation: Mh (homogeneous PDL) and Mht (heterogeneous PDL with beam3 elements). Stress and displacements were determined for three loading conditions (L): Ll, lingual face loading at 45° with the tooth long axis; Li, perpendicular to the incisal edge; and Lip, on the incisal edge, parallel to the tooth long axis. Evaluation was performed on ANSYS software. Lip provided lower stress variation on the tooth and support structures when compared to Ll and Li. PDL's influence on stress values was lower for Lip. Oblique loading showed stress and displacement not observed in parallel loading condition through PDL's heterogeneous representation and it is probably incompatible with the in vivo condition.     

Effect of environmental conditions on decomposition in eight woody species of a dry tropical forest

Litter decay is a significant part of carbon budget. Due to strong environmental control, the changes in the environment may drastically influence the litter decay rates. Litter decomposition of eight dry tropical woody species, viz. Shorea robusta, Buchanania lanzan, Diospyros melanoxylon, Lagerstroemia parviflora, Lannea coromandelica, Terminalia tomentosa, Holarrhena antidysenterica and Lantana camara was studied to document the effect of intra-annual changes in the environment. Litter decomposition was monitored at monthly intervals at five sites using litter bag technique over an annual cycle in a dry tropical deciduous forest of Vindhyan highland, India. Weight loss differed among species and through months, and ranged from 15.38% in L. camara at Kotwa site in January to 30.72% in T. tomentosa at Hathinala site in August. Peak weight loss occurred in August and averaged 46.2% across species and sites. Nitrogen and phosphorus mineralization rates also varied significantly from species to species. T. tomentosa having higher nitrogen content and lower C/N ratio than other species exhibited faster weight loss. Nitrogen and phosphorus contents of litter showed significant positive correlation with weight loss. C/N ratio was negatively related to decay constant, and the weight loss was positively related to the soil surface temperature as well as soil moisture content.     

Morphological and morphometrical description of the glochidia of Westralunio carteri Iredale, 1934 (Bivalvia: Unionoida: Hyriidae)

Most freshwater mussel (Bivalvia: Unionoida) larvae (glochidia in Margaritiferidae, Hyriidae and Unionidae) are fish parasites. Knowledge of the larval morphology and the mechanism of release in freshwater mussels is useful in species systematics and ecology. Westralunio carteri is the only unionoid from south-western Australia. Little information is available on its biology and its glochidia have never been described. The aim of this study was to describe the glochidia of W. carteri and method of their release. Glochidia within vitelline membranes were embedded in mucus which extruded from exhalent siphons of females during spring/summer; they then hatched from vitelline membranes but remained tethered by a larval thread and began characteristically “winking”. Shells (n=120) were subtriangular, 308 μm long (±0.83 SE), 251 μm high (±0.73 SE) and had a hinge length of 212 μm (±0.78 SE). Larval teeth were singular with interlocking cusps and convex or concave basal protuberances on opposing valves.